ActionScript 3.0 :: Place A Group Of Movie Clips With Random Types (different Shapes On A Square) In A Grid Formation
Sep 24, 2010
I place a group of movie clips with random types (different shapes on a square) in a grid formation The code for placing the movie clips is this (this is in two for loops):
[Code]...
this goes up a single column in the grid and should remove the tiles from the stage depending on each type and it does this (sort of) until it tries to remove more than one of the same type. So if it finds and removes an lShapes it doesn't error until it tries to remove another lShapes and then it gives this error in the output: Error #2025: The supplied DisplayObject must be a child of the caller. So I am assuming that this means it thinks all lShapes have been removed and thinks I'm trying to remove something that doesn't exist but there are other lShapes on the stage. I am at a loss as to what to do about this.
View 1 Replies
Similar Posts:
Nov 12, 2009
I have 35 movie clips named mcMyObject1, mcMyObject2, etc. to mcMyObject35Each time the playhead enters the frame this code sits on, I want all of these 35 movie clips to be placed on the stage in random orderI want each one of these 35 movie clips to land on one of these X coordinates: 57, 187, 317, 447, 577, 707, 837 and on one of these Y coordinates: 53, 183, 131, 443, 573. (It's a 7 x 5 grid)Movie size is 1024 x 768Here's my code, which doesn't work:
stop();
var myXArray=[57, 187, 317, 447, 577, 707, 837]; //cordordinates for x
var myYArray=[53, 183, 313, 443, 573, 573, 573]; //cordordinates for y
[code]......
View 8 Replies
Jul 2, 2010
i have a grid:
0 - 1 - 2 - 3
4 - 5 - 6 - 7
8 - 9 - 10 - 11
12 - 13 - 14 - 15
(but will be more rows...)how can i find out programmatically if a random number (within the range of the numbers) is equal to the far right number: 3,7,11,15...?
View 1 Replies
Mar 24, 2004
I place the code in the timeline but I dont know where to place them to make the movie clips work?
* do i have to place them on the time line?
* Do the have to be named a certain Way ?
* Do they have to have some code ?
View 2 Replies
Dec 19, 2010
I am trying to create a square grid and add it to the movie. When I open the actionscript panel by pressing F9 and when I type the following code,
Code:
var square:SquareClip = new SquareClip();
addChild(square);
Things are working fine (the squareclip is appearing in the movie).Instead when I do this however, I deleted the above code and just create a new instance of Main,
Code:
new Main
and inside Main.as
[code].......
And when I run the code, my square is not coming.
View 5 Replies
Jul 5, 2011
I want to make a square grid of fixed side length but varying grid number using code.That is, the number of grids should be specified by the user (say 3*3) and after pressing a button, the stage should be broken into 3*3 grids.I don't want any code, just a method on how to do it. I have tried it by using simple loops but the method just fails for no reason I can figure.
View 5 Replies
Nov 20, 2005
I have this "point" movie clip that starts on a random hitpoint. I can drag around, on the stage and there are more than 10 small invisible movie clip.How do i create any sort of algorithm where it can somehow "loop" thru all the movie clips to test if it hits any?If so, it will snap to it, else it will revert back to the previous hit point?
View 2 Replies
Nov 17, 2009
How do I set up an array (or other method), to disable the visibility of a group of movie clips all at once?
I've tried this...
var invisibleMCs:Array = new Array ("MC1", "MC2", "MC3");
invisibleMCs._visible = false;
View 1 Replies
Feb 6, 2009
I am working on a project for a client. It is a service map for their company. It is basically an isometric view of the clients state, split up into counties. The counties are individual Movie Clips. When a clip is rolled over, it appears to float up above the rest and it glows and displays a tool tip with county specific information. On roll out, the clip tweens back down to its original position in the isometric lay out.
Heres my issue, These Movie Clips are all odd shapes since they are counties in a state. If the mouse is positioned at the bottom edge of one of these clips it will "bounce" as in it rolls over, tweens up, sees the mouse isnt there, tweens back down, hits the mouse, and goes back up again. I have tried rearranging my event listeners, and even adding a timer to the tween back down, i still get the bouncing effect. here is some of the basic code.
[Code]....
View 2 Replies
Mar 5, 2005
I'm making a game where missiles are created using the duplicateMovieClip thing and I've used it a lot before, but i never noticed that there is a limit to the number of layers, around 256, I think. The problem is that i have a bunch of sprites in my games and each of them move(i.e. fire,smoke,shrapnel from rockets,etc) so is there a way to group a large amount of movie clips so that they're on one layer, without putting them into another movieclip? If u want look at a part of my game, well two parts.
View 3 Replies
Dec 10, 2009
i have a bunch of movie clips and in order to make them rotate the way i want i have grouped them together, made the entire group into a movie clip and applied the motion tween. I'm trying to code it so that when i mouse over the movie clips WITHIN the group movie clip, something happens. How would i go about it? All i can work out is how to make the entire group react on mouse over, not the individual movie clips themselves.
View 2 Replies
Oct 6, 2009
[URL]
At step four, it says to
4- Inside another Movie Clip named "Limits" place "Pads" and "Wall". Pads' instance name should be "Pads" and Wall's instance named "Border". We put the Wall and Pads inside the same Movie Clip, to use it to know when the ball collided. And we couldn't put everything together because the ball behaves different if hits the Wall instead of the Pads.
How do I create this movie clip and put the other movie clips "inside it"? Also, if anyone can find out, where do I put this movie clip? Do i put it at the same spot as the wall?
View 7 Replies
Sep 23, 2011
I am creating a grid of MovieClips through loop [ rows and cols vary as it is user input value ]
I want to enter Text along outer movie clips and text between spaces (outside) as rows and cols are dynamically so there can be many rows and cols
Is that possible to add text like in the image at the time of grid creation ?
View 1 Replies
Mar 24, 2005
I have this code that will do one row of movie clipsI need to have a 5x5 grid of movie clipswhen i try to add an outer loop it won't work for me so i was wondering if someone can tell me how can i have a 5x5grid insted of a 1x5
Code:
var clipArray = new Array();
var posArray = new Array();
[code].....
View 10 Replies
Mar 24, 2005
I have this code that will do one row of movie clips.I need to have a 5x5 grid of movie clips when i try to add an outer loop it won't work for me so i was wondering if someone can tell me how can i have a 5x5 grid insted of a 1x5.[code]
View 10 Replies
Sep 20, 2002
look at this thread [URL] now the movie works which is great but i want to have a lot more balls. i could create 150 of them and give each an instance name but that would take forever. is there a way to do this with actionscript. i know i can duplicate a movie clip although i don't know how to put them in that box formation like i have them in this movie but can i duplicate them into that formation and assign each an instance name that consists of a number so that when [i] is equal to their instance name the clip will play.
View 4 Replies
Apr 12, 2007
I`m trying to flip a square. The coin flip as works fine with round shapes, but with a square it just doesn`t do it.
View 4 Replies
Nov 17, 2011
On the stage, I have 10 draggable movie-clips and 10 targets. At the moment, I have it set in such a way that, each movie-clip matches a specific target. Is it possible that the end-users will place the movie-clips on any targets they want? If so, what could be the easiest method to use?My project is a little complicated but my goal is to give the user the freedom to place the movie-clips to any targets which will make them snap and also give them a conditional statement. My project contains one exact model of an answer but there are a lot of probabilities because the end-user are more likely to place them around the targets randomly.
View 0 Replies
Mar 31, 2010
I'm trying to position dynamically generated movie clips into rows and columns. Currently i've managed to position them side-by-side using the same ._y position. I would like to position them into a grid consisting of 25 columns and 16 rows, so mc 26 would sit beneath mc 1 etc...
View 9 Replies
Dec 9, 2005
I've been staring at the screen too long and I'm sure the answer is simple but this has been bugging me for a bit now. I've created a grid with over 200 movie clips dynamically using a for loop. I was wondering if there was a way to assign rollovers and such to each new clip using the same loop.
I've been poking around with it a bit but can't seem to get it working and sure don't want to write over 200 rollover functions so any help would be great.
View 7 Replies
Aug 12, 2010
This is my first action script project and I'm having trouble with some positioning of movie clips that I can't work out. I'll post in the parts of the code that I think are relevant in hopes that someone may be able to see what I am missing. The problem is that according to my traces my gridSnap function should be working. The trace shows mc.y to have the correct value while the movie is running yet the mc's in question are appearing in the wrong spot (they appear at GRIDSIZE*gridNumber) in the movie. The problem only manifests itself in case one and case three, both of which should have the same code but I was only testing different approaches in case one. On with the code:
[Code]...
View 3 Replies
Dec 19, 2010
I am relatively new to flash. I am trying to create a square grid and add it to the movie.When I open the actionscript panel by pressing F9 and when I type the following code, var square:SquareClip = new SquareClip();addChild(square);
Things are working fine (the squareclip is appearing in the movie). Instead when I do this however, I deleted the above code and just create a new instance of Main,
[Code]...
View 2 Replies
Nov 10, 2009
I have movie clips loading in dynamically using an XML file, and the duplicate movie clip function. I need to be able to select one of those movie clips, drag it to a desired position and have it snap to place. As for right now, I'm using :
[Code]...
View 3 Replies
Sep 17, 2004
instead of the grid fading horizontally or vertically, have the grid fade diagonally, or have it fade corner square, then left square beside it and top square above it (corner square) at the same time, then the ones beside those etc. as transition for the image below it, for a screen saver (5 or 6 images in a row). Also I was wondering if this diagonal grid (assuming it can be done) can be done with other shapes (instead of squares).
View 9 Replies
Aug 25, 2009
I've set up a simple enter frame loop to adjust the alpha on a grid of movie clips ("bubbles") using a distance formula from the mouse pointer.I've got a hunch that while this works fine, there's a more efficient or processor friendly way to do it.
grid of mc's created here....and pushed into an array
stage.addEventListener(Event.ENTER_FRAME, loop);
function loop(e:Event):void{ for each (var j in bubbArray)[code].....
View 1 Replies
May 5, 2009
I have 5 boxes on the stage as movie clips, each one with the same animation waiting to be targeted. What I need is a random script that will make them play in "random" order. This should occur after a few seconds of inactivity where they each play, but once there's mouse movement, whichever ones did animate should "reset" or play back to their original positions, (assuming there's more boxes and there's movement before all of them play). I have some code in there for arrays and some random script that isn't working right now. I just need the random setup, really. I may be able to figure out the time delay, (maybe), and then be able to tweak the rest of it for how I need. Right now, I've just simplified everything in a 5 box example hoping someone might be able to work with what I have.
View 6 Replies
Aug 15, 2003
-Take a circle and place it in the center of a square scene.
-Make a rectangle and snap its left edge to the circle's center.
-Make another rectangle and snap its left edge to the right edge of the first rectangle.
How would you make it so movement doesn't happen at the registration point but on the whole arm. Say i ran a rotation script on the upper arm with +=1 and the lower arm with +=2. How would you place the parts, what format would they be converted to and what would the script format be. Multiple methods would be welcome of course!
View 1 Replies
Oct 13, 2009
I am trying to work with this flash tutorial -[URL] So far it draws with a simple rounded line. I have been extending this application by making the drawing board bigger and other small things. I now want to be able to choose the line style. Currently it is rounded and I want to choose and draw with other shapes - square, forward slash (/), backward slash (). Is this possible? If so, could you explain how I could go about it?
View 1 Replies
Sep 30, 2003
I'm trying to make it so that when the main page loads, I have two movieclips, the name of the client's company and their slogan.
The movie clips fade in and out, but I can't get them to appear at different places on the stage.
For example, the page loads, then "Hughes Team Racing" fades in then out in nice fancy font on the right of the stage, how do I make it so that the next time it fades in and out its at a different place?
View 1 Replies
Mar 24, 2010
I have three movie clips on my stage. Their names in my library are a1_mc, a1_mc2, and a1_mc3. Each of those movie clips on my stage has a different instance name. All of these are connected with an actionscript in the same file.Now, I'd like the movie clips to appear at a random position every time, they are loaded.
I already tried to make a new array and solve this issue with the sort() command. However, that did not work out properly. The positions and instance names of the movie clips on my stage are as follows:
a1_mc
instance name on stage: a1
position on stage: X = 20.0 | Y = 140.0
[code]....
View 1 Replies
