I have this "point" movie clip that starts on a random hitpoint. I can drag around, on the stage and there are more than 10 small invisible movie clip.How do i create any sort of algorithm where it can somehow "loop" thru all the movie clips to test if it hits any?If so, it will snap to it, else it will revert back to the previous hit point?
View 2 Replies
How do I set up an array (or other method), to disable the visibility of a group of movie clips all at once?
I've tried this...
var invisibleMCs:Array = new Array ("MC1", "MC2", "MC3");
invisibleMCs._visible = false;
I'm making a game where missiles are created using the duplicateMovieClip thing and I've used it a lot before, but i never noticed that there is a limit to the number of layers, around 256, I think. The problem is that i have a bunch of sprites in my games and each of them move(i.e. fire,smoke,shrapnel from rockets,etc) so is there a way to group a large amount of movie clips so that they're on one layer, without putting them into another movieclip? If u want look at a part of my game, well two parts.
View 3 Repliesi have a bunch of movie clips and in order to make them rotate the way i want i have grouped them together, made the entire group into a movie clip and applied the motion tween. I'm trying to code it so that when i mouse over the movie clips WITHIN the group movie clip, something happens. How would i go about it? All i can work out is how to make the entire group react on mouse over, not the individual movie clips themselves.
View 2 RepliesIve created a project that creates random movies clips with text in them, everything works fine except that movie clips will overlap each other due to the random nature of the project.I've looked everywhere tips on hitTest methods but I cant seem to get it right, the major problem is that the clips have similiar names, if I try a hit test the movie clip will just detect itself and not look for the other clips.
View 3 Repliesi am currently making a game , and for some reason the hittest on my duplicated movie clips isnt working i know how to do them , and know it should be working , because it works on one of the movie clips but none of the others so im guessing it something to do with depth?
View 2 RepliesI place a group of movie clips with random types (different shapes on a square) in a grid formation The code for placing the movie clips is this (this is in two for loops):
[Code]...
this goes up a single column in the grid and should remove the tiles from the stage depending on each type and it does this (sort of) until it tries to remove more than one of the same type. So if it finds and removes an lShapes it doesn't error until it tries to remove another lShapes and then it gives this error in the output: Error #2025: The supplied DisplayObject must be a child of the caller. So I am assuming that this means it thinks all lShapes have been removed and thinks I'm trying to remove something that doesn't exist but there are other lShapes on the stage. I am at a loss as to what to do about this.
I am making a small game in which you are a little shooty spaceship type thing, and there are duplicated mines falling around you. When you press space, the shooty spaceship type thing fires duplicated bullets. How do I check a hittest between any bullet
View 3 Repliesi am currently making a game, and for some reason the hittest on my duplicated movie clips isnt working i know how to do them , and know it should be working , because it works on one of the movie clips but none of the others so im guessing it something to do with depth? i will give the code if any1 replys
View 2 RepliesHow do I detect collisions between movie clips and a line created through actionscript (with the lineStyle, lineTo, etc. commands). I tried making the line inside a movie clip and doing a hitTest with that movie clip, but it did nto work.
View 1 Repliesi am working on a game called "virus". you click somewhere on the screen and the virus goes to where you click. you have to dodge random moving white blood cells, and if you hit them you lose. everything is working. except for one thing. scoring.
i have made a movieclip with a dynamic textbox in (score), and in the movie clip there is a section where the number in the score textbox goes up really quickly, a section where is goes up medium, and a section where it goes up slowly. i want to make it so that when you get closer to the center of the movie, for the score to go up quicly, and slower as you get further out. i have tried hittest with movie clips in the centre of the stage, but it doesnt seem to work.
say I have 3 movie clips I want the easiest way to do a hitTest with them... The easiest way I thought of was this but it doesn't work
[AS]
onClipEvent (load) {
mouse.hide();
walls = _root.one or _root.two or _root.three;
}
onClipEvent (enterFrame) {
[Code]...
It's just a quick example of what im trying to do. one, two, and three are movieclips. Is the way I am trying possible? Or is there some easier way I could go about doing this besides writing it out for each movie clip?
I have 3 movie clips... I want the easiest way to do a hitTest with them... The easiest way I thought of was this but it doesn't work
[AS]
onClipEvent (load) {
mouse.hide();
walls = _root.one or _root.two or _root.three; [CODE]....
one, two, and three are movieclips.Is the way I am trying possible? Or is there some easier way I could go about doing this besides writing it out for each movie clip?
I've built an array of movieclips - all of them sitting static on the stage. I'm trying to trigger the clips to play as they are hit by an invisible/alpha 0 bar which sweeps across the stage... kind of like a mexican wave? I'm still a bit crappy with arrays - here's my code:
[Code]....
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
I'm just wondering if hitTest can be affected by the changing x,y coordinates or the changing scale of the parent clips. My platform engine doesn't seem to work everytime I try to add a script to a parenting clip (of a playable character and a computer character) that changes the x and y values of that clip as well as the scale (simulating a camera that keeps both characters in focus).
View 2 RepliesAs most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Repliessay I have a clip with an onEnterFrame running on it with a hit test to check if the user has rolled off the clip . . . Then i create an empty clip within that clip and attach clips to it. Will my .onEnterFrame and hitTest now apply to the clips i have attached to the original clip?
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 RepliesI've got some MC's in my library that have radiobuttons in them -- all of this created at design time -- and pull them onto the stage dynamically. My question is how do I get the selectedData from the group? The setup is like this: In a MC called pageOne, I have a group of buttons with a group name of Q1, Q2, etc. I pull the MC onto the stage like this:
[Code]...
Do I need instance names on each of the buttons and add listeners to all of them?
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
