I have 3 movie clips... I want the easiest way to do a hitTest with them... The easiest way I thought of was this but it doesn't work
[AS]
onClipEvent (load) {
mouse.hide();
walls = _root.one or _root.two or _root.three; [CODE]....
one, two, and three are movieclips.Is the way I am trying possible? Or is there some easier way I could go about doing this besides writing it out for each movie clip?
say I have 3 movie clips I want the easiest way to do a hitTest with them... The easiest way I thought of was this but it doesn't work
[AS]
onClipEvent (load) {
mouse.hide();
walls = _root.one or _root.two or _root.three;
}
onClipEvent (enterFrame) {
[Code]...
It's just a quick example of what im trying to do. one, two, and three are movieclips. Is the way I am trying possible? Or is there some easier way I could go about doing this besides writing it out for each movie clip?
Ive created a project that creates random movies clips with text in them, everything works fine except that movie clips will overlap each other due to the random nature of the project.I've looked everywhere tips on hitTest methods but I cant seem to get it right, the major problem is that the clips have similiar names, if I try a hit test the movie clip will just detect itself and not look for the other clips.
View 3 Repliesi am currently making a game , and for some reason the hittest on my duplicated movie clips isnt working i know how to do them , and know it should be working , because it works on one of the movie clips but none of the others so im guessing it something to do with depth?
View 2 RepliesI have this "point" movie clip that starts on a random hitpoint. I can drag around, on the stage and there are more than 10 small invisible movie clip.How do i create any sort of algorithm where it can somehow "loop" thru all the movie clips to test if it hits any?If so, it will snap to it, else it will revert back to the previous hit point?
View 2 RepliesI've built an array of movieclips - all of them sitting static on the stage. I'm trying to trigger the clips to play as they are hit by an invisible/alpha 0 bar which sweeps across the stage... kind of like a mexican wave? I'm still a bit crappy with arrays - here's my code:
[Code]....
I am making a small game in which you are a little shooty spaceship type thing, and there are duplicated mines falling around you. When you press space, the shooty spaceship type thing fires duplicated bullets. How do I check a hittest between any bullet
View 3 Repliesi am currently making a game, and for some reason the hittest on my duplicated movie clips isnt working i know how to do them , and know it should be working , because it works on one of the movie clips but none of the others so im guessing it something to do with depth? i will give the code if any1 replys
View 2 RepliesI'm just wondering if hitTest can be affected by the changing x,y coordinates or the changing scale of the parent clips. My platform engine doesn't seem to work everytime I try to add a script to a parenting clip (of a playable character and a computer character) that changes the x and y values of that clip as well as the scale (simulating a camera that keeps both characters in focus).
View 2 RepliesHow do I detect collisions between movie clips and a line created through actionscript (with the lineStyle, lineTo, etc. commands). I tried making the line inside a movie clip and doing a hitTest with that movie clip, but it did nto work.
View 1 Repliessay I have a clip with an onEnterFrame running on it with a hit test to check if the user has rolled off the clip . . . Then i create an empty clip within that clip and attach clips to it. Will my .onEnterFrame and hitTest now apply to the clips i have attached to the original clip?
View 2 Repliesi am working on a game called "virus". you click somewhere on the screen and the virus goes to where you click. you have to dodge random moving white blood cells, and if you hit them you lose. everything is working. except for one thing. scoring.
i have made a movieclip with a dynamic textbox in (score), and in the movie clip there is a section where the number in the score textbox goes up really quickly, a section where is goes up medium, and a section where it goes up slowly. i want to make it so that when you get closer to the center of the movie, for the score to go up quicly, and slower as you get further out. i have tried hittest with movie clips in the centre of the stage, but it doesnt seem to work.
I have a movie clip called frog who moves along the screen, I want him to jump when he hits any other movie clips. I can make him do so with the code below, the problem is that if I write the same function for the other movie clips it doesnt work, it still works on the first one but none others. I have tried attaching an onCilpEvent on both the frog and on all the other movie cilps so no avail.
function hitBaby(){
if(_root.babyWord.hitTest(_root.frog)){
_root.frog.gotoAndPlay("frogB");}else{ _root.frog.gotoAndPlay("frogA");}
[code]....
I am running a hittest on an array of thousands of MCs a little a part, due to the nature of this sometimes two can be hit at once.How would I narrow it down so that the one which is hit the most is the one returned value?
View 1 RepliesHow to apply the hitTest to multiple objects for a side scroller game. Right now, I have the MC:hero hitTest against the MC:ground and MC: platform. Problem is, if I want multiple platforms (IE: copying and pasting the orginal MC: platform) he will only hitTest on the 1st instance (platform1). I've since read up on it and learned that Flash will only hitTest on that first instance. But is there a way to make that MC: platform universally hitTest my MC:man? As it is right now, I have to code into the MC:man instance each and every platform instance. It's not a big deal, but after about 5 platforms, the codes seems unnecessarily long. I'm new to AS so I know there's got to be an easier way. Maybe arrays or something?
View 12 RepliesIm trying to make a small game. Could someone take a look at the CS4 and CS3 fla files attached and tell me how to make the game reset when the red circle touches the block boxes.
View 7 RepliesI have many black boxes fallling down and i want the game to reset when the black boxes touch my red circle. I used this code for my boxes:
ActionScript Code:
this.createEmptyMovieClip("canvas_mc",10);
myInterval = setInterval(addbox1,500);
function addbox1() {
[Code].....
I have this code to use to pause animations in different areas of a .fla, for each pause I have been copying this and changing the "var timelinePause" and other items as shown after the original code, is repeating this code for each pause just junk code? is there something else from this that I can use to pause?
[Code]...
I'll try to make my question pretty short and simple.
[Code]...
So what I'm trying to do is make the character stop when it runs into something. I can do that, but it will only work for one "block" movieclip I put on the stage. What can I do to make this work for multiple "blocks"?
[Code]..
I want to use the above code (obviously with more meat inside of it) on multiple instances of the same symbol, but when I name the instances "wall" only one of them actually performs the hitTest. Is there a way to pull this off without having to perform a hitTest on every instance?
prepare the area with instances of the 3-people-MC for the "maximum amount of people" case (covering the whole area).have a shape in their midst, filled with a transparent fill (or have it be invisible, if that would still work with a hittest).resize the shape mentioned in "2." according to how many people I really want displayed (change width and height).have a function nested in each 3-people-MC that checks whether or not that MC is hit by the shape from "2.".make the 3-people-MC visible or invisible according to "4.".Is that doable? how would you write that? Before, I was just working with a mask- but I am having trouble checking if the mask hits the people MCs or not
View 6 RepliesI have a movie it is a triangle.I duplicate it and I want to hitTest on the first triangle movie clip and I added 3 different line movie clips on the 3 side of triangle.I tried to write a code something like that.
if(firstTriangle_mc.hitTestObject(line1_mc,line2_mc,line_3mc){
trace("Ok");
}
but I've got error.I think it is not allowed hitTestObject for multiple Movie Clips.So is there anyone have an opinion about it?What should I do?
By using the attachMovie function, I create multiple entities of the same movieClip. Is it possible to detect collisions from the same, but multiple movie clips (And, with different Linkage Identifiers with each entity of the same movieClip.
View 3 RepliesI'm actually working on a multiple collision detection in actionscript 3.0, using pixel collision for a game for my assignment, where an enemy patrols around and searching for the hero. So, i draw a line between the enemy and the hero, to check whether there's some collision happened between those two. if the line colllides with an obstacle such as wall, door, etc. enemy will not be able to see the hero. When i tried a single line collision with a wall (one object only) it works perfectly.
But here's the problem. For the multiple objects collision (several walls and doors included), i added those objects in an arraylist, When i used for loop to check the collision between the line and those objects in the arraylist, none seems to react , except the first object in the arraylist or index 0.
Is there any simpler way to do the multiple collision detection?
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesThe Setup: For each movieclip the hittests a set of "target" movieclips an array is given a value. If mcIcon1 is dropped onto mcTarget1 the first number in the vacant array is given the value of one. The Issue: If I remove mcIcon1, for example, from the mcTarget1 movieclip I can't find a way of just removing the 1 from that array without the rest of the array numbers being reset.
[Code]...
I have 1 button (instanced : but)and 3 movie clips (instanced : mc_test, mc_clip, mc_example)when I release the but, I'd like 2 clips to move down (200px) and 1 clip to move up (200px)I'd like it to look like that
Code: Select allfunction down():Void {
_y=_y + 200;
};
[code].....
I am creating a project that will have 28 different "link" actions to appropriate flv clips that will then play in the center of my program/project. I am starting to realize that in Flash CS4 you can only import one flv clip at a time.
How can I bring in multiple flv clips? I have started to create seperate layers for all the possible flv clips then I have created buttons out of my text and then provided script that would look for the mouse event of "click" that would then send the user to a lable that I have named on an "action/lable" layer thus playing the appropriate layer or flv clip.
All the flv clips are going to be inside the project since there is no access to the internet or a server. All project files would be on one computer at a display with a touch monitor.
Is there a better way hiding mutiple mc's than this?
button1.onPress = function(){
first_mc._visible = false;
second_mc._visible = false;
third_mc._visible = false;
}
What I think I want to do is make an array of the movie clips and apply the function to that array?
I have 6 movies that i need controling. These are named hex1, hex2, hex3 etc. When the file opens i have some action script that needs to run something like this:
while (i<7) {
hex[i].gotoAndStop(1);
i=i+1;
[code].....
