ActionScript 3.0 :: Bouncing - Movie Clips Are All Odd Shapes Since They Are Counties In A State
Feb 6, 2009
I am working on a project for a client. It is a service map for their company. It is basically an isometric view of the clients state, split up into counties. The counties are individual Movie Clips. When a clip is rolled over, it appears to float up above the rest and it glows and displays a tool tip with county specific information. On roll out, the clip tweens back down to its original position in the isometric lay out.
Heres my issue, These Movie Clips are all odd shapes since they are counties in a state. If the mouse is positioned at the bottom edge of one of these clips it will "bounce" as in it rolls over, tweens up, sees the mouse isnt there, tweens back down, hits the mouse, and goes back up again. I have tried rearranging my event listeners, and even adding a timer to the tween back down, i still get the bouncing effect. here is some of the basic code.
[Code]....
View 2 Replies
Similar Posts:
Sep 8, 2011
I have made a number of Flash banners and I save them and everything is good but when I open them, some of the movie clips have reverted to a previous state. So I need to resize and redo thsoe movieclips. I make one banner and then save as new file and resize it. It is really annoying.. I am on P.C. and have all the current updates installed.
View 5 Replies
Sep 24, 2010
I place a group of movie clips with random types (different shapes on a square) in a grid formation The code for placing the movie clips is this (this is in two for loops):
[Code]...
this goes up a single column in the grid and should remove the tiles from the stage depending on each type and it does this (sort of) until it tries to remove more than one of the same type. So if it finds and removes an lShapes it doesn't error until it tries to remove another lShapes and then it gives this error in the output: Error #2025: The supplied DisplayObject must be a child of the caller. So I am assuming that this means it thinks all lShapes have been removed and thinks I'm trying to remove something that doesn't exist but there are other lShapes on the stage. I am at a loss as to what to do about this.
View 1 Replies
Apr 3, 2007
the problem is that when i click on another link i.e. "Home"...i have an outro that plays.it is a mask that covers all the buttons and creates a wipeout effect. but you'll notice right after you click the link the buttons return to their original opacity. is there a way to have their current opacity stay so that they don't return to original when the wipeout occurs? the code is fairly simple. each rollover button(movie clip) has the following code.
//stop();
this.onEnterFrame = function() {
[code].....
View 4 Replies
Jul 10, 2008
Do you know any tutorial similar to this one [URL]...y=ActionScript) that shows how to make a bouncing image that resizes during bouncing?
View 3 Replies
Nov 24, 2010
I'm working on a project that involves making a globe in flash which will have many particular points (all the worlds major cities by using their longitudes and latitudes). It's all 2D made to look 3D.To make the "Sphere," I put together some code that stacks a bunch of ovals that creates the illusion of space, ala the code below...
//AS3
function magicTrigFunctionX (pointRatio){
return Math.cos(pointRatio*2*Math.PI);
}
[code]....
Now, my problem is that in order to assign the longitude and latitude information I need to be able to address each oval individually (not only which one, but also eventually the angle/radians of each oval for the latitude) and I've run into a snag...I don't know how or perhaps exactly what to do, because I know how to make it a symbol and class if the object was already made visually using the oval tool in the tool bar, but I can't figure out (after taking a bit of time looking up on how to use arrays and classes) how to do it in the AS3 code where I actually made the "sphere."
View 0 Replies
Sep 13, 2009
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
View 1 Replies
Sep 3, 2011
i curious how to access state in flex "Current State" from flash movie clip??..so far i make movie clip in flash and it has button inside with name " button" and i put this flash file into flex in "state 1" flex application..i want to make event handler for "button" that trigger changing state from "state 1" to "state 2" in flex application..and in flex application i do not write anything because i have no idea how to deal with this stuff..
View 1 Replies
Jun 5, 2011
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
View 2 Replies
Jul 15, 2009
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 Replies
May 3, 2010
My project consists of various external SWF files and also uses SWFAddress. What I want is the internal state of some external clips to set the SWFAddress value.
View 1 Replies
Feb 17, 2009
I have a question about shapes (i mean the flash.display.Shape class). Is it possible to import Shapes directly from the library as Shapes and not as Sprites/MovieClips? Shapes are supposed to be faster than MovieClips/Sprites, right? So why is it only possible to import MCs/Sprites from the library? I understand that generally shapes could be created solely by actionscript, but in my case the shape comprises of many points and is curved - so it's quite infeasible.
Is there maybe some sort of plugin to generate code that would draw the desired shape from a drawn shape in CS4? And a last one: Are there any benchmarks out there for performance comparison between sprites/mcs/shapes? How much performance do i loose by using a sprite instead of a shape?
View 2 Replies
Jan 4, 2009
I'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 Replies
Jul 14, 2003
How would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
View 7 Replies
Sep 17, 2004
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
View 3 Replies
Sep 7, 2009
[url]...He creates a movieclip called aPuff and then gives the movieclip an identifier of aPuff as well. It generates a smoke-like effect which is really nice; however, I'm wanting to get it to stop at some point...preferably by allowing the last puff to go up and fade out.[code]...
View 1 Replies
Jan 5, 2009
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 Replies
Aug 18, 2005
Here's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
View 2 Replies
May 8, 2003
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
View 2 Replies
Jun 22, 2010
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
View 5 Replies
Jun 1, 2009
I am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
View 5 Replies
Jul 19, 2006
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies
Mar 26, 2008
my aim is to get the movie clip (bar shapes) to move up and down randomly over time. this is the actionscript ive done so far. by the way im using flash 8 so i beleive that its actionscript 2.
[Code]...
View 2 Replies
Mar 27, 2005
okay, i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect... my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
View 5 Replies
Mar 27, 2005
i'm trying to create a full website myself, and inside my main scene movie, i have a movie clip for the content.. inside THAT clip on a frame for the links, i have another movie clip that has all the link buttons embedded... i've got those buttons set up so they stagger fade in as an effect...
my problem is, they just keep repeating, and i want the fade in effect to stop after the first time. i've got a stop keyframe after the tween of every button motion, but i dont know the correct code for the movie/button clip itself to play once and then stop.. this is what i have right now, as an action on the movie clip with the buttons inside it:
onClipEvent (enterFrame) {
play();
}
also if you want to see what the problem is, here's the website in it's infancy (700k)
View 5 Replies
Dec 4, 2010
for example:
var mc:MovieClip=new MovieClip();
mc.graphics.beginFill(0x000000,0.5);
mc.graphics.drawRect(0,0,100,100);
[code].....
View 7 Replies
Feb 12, 2009
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies
Dec 17, 2010
I have continually run into this so i guess i just don't understand some foundation to how AS3 works.
So, I have a movie clip in the library (ClipA) - it is linked to a class.
Inside Clip A there are 3 other Movie Clips (SubClip1, SubClip2, SubClip3).
When I place ClipA on the stage i want to adjust the frame that each of the SubClips are on.
BUT, when I try to set them to a frame in ClipA's class file i get an error like this:1061: Call to a possibly undefined method gotoAndStop through a reference with static type flash.display:DisplayObject.
[Code]...
View 3 Replies
Jul 30, 2009
i got 3 movie clips on my logo and im using scale up and scale down for each other on Mouse_OVER and Mouse_OUT.i would like to make scaled up logo to be on absolute top.[code]
View 6 Replies
Feb 13, 2010
We have a movieclip mc1 with another movieclip mc2 inside of it. We are creating an instance of mc1 on the stage through actionscript and need to be able to reference mc2. We have tried various methods to do this but had no success.
View 3 Replies
