I've just been called onto a bug in an application that I didn't build.We have a master application, running at 40fps, which loads .swf components with embedded movies in.Last week, all the videos started playing too fast.The videos are rendered to .flv at 25fps.Is there a way to enforce that embedded videos retain their native frame-rate?
View 1 Repliesit possible to set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within. I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 RepliesI'm recording Webcam to FMS 3.5 but when I play the recorded video from FMS it's choppy. I have set the camera.fps to 30 but when I trace out the currentFPS for camera it's variable and usually falls between 20 and 30. However when I play the recorded video, netStream's currentFPS returns a lower value, something closer to 10. So my question is, 1) why currentFPS of netStream is not the same as Camera's? 2) What's the actual frame rate of the recorded video (not the netStream, but FLV's)?
View 2 Repliesset the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within.
I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
I have a frame on my movie that will have two input boxes where you can write in team names, and then have a button that will go to the next frame where the games is. When the movie goes to that frame I would like the text that was written in the input box in the previous frame to be retained and used in a dynamic text box to display the team names/s.
View 1 RepliesI got a MovieClip filled with a lot of others clips... When I change de X or Y value of this first MovieClip the frame rate slows down for during 1 frame. For exemple... I created a counter that returns around 30 mseconds every frame, but when I do this X or Y change the return is around 400 mseconds... When I try to fill the first MovieClip with less information it goes faster, about 100+-200 mseconds...
View 6 Repliesflash video that incorporates buttons to share to sites like twitter or facebook? For example at the end of a video at youtube you are presented with a share button. At vimeo there are links on the right hand side of the video for like, share, embed, etc. Are these buttons (i.e. links) added during creation of the video or are they added by the site itself?
I am trying to build a small site that allows a user to upload videos and have a 'share to facebook' and 'share to twitter' button show up in the video when the video is done playing.
I'm experimenting with CSS transforms and I noticed that embedded videos (like for instances the ones from youtube) don't behave as expected when a CSS transformation is applied to them.
I've tested this in the latest Chrome, Firefox and IE and none of them was able to display transformed videos.Is this a bug of sort, or are videos not supposed to obey to CSS transformations? Not even using html5 in Chrome solved the issue.
I follow this steps and manage to play videos on my flash movie, [URL]is possible to block the ads?
View 1 RepliesI want to be able to stop all embedded flash videos on a page. For example, I have 3 flash movies on a page. If one is playing, I want it to stop if another is started.
I have just got back to programming flash after not doing any in a few years.
Im having serious issues making a video sync with audio inside an embedded flash video file.
View 2 Repliesi've got a problem with a Flash website that has been driving me crazy. i have a Flash website that was built for us in late 2009, it uses ActionScript 2 and i have been maintaining it in CS3 on a Mac.
the site is structured as a heirarchy of swf files, and loads XML files to specify text content, image locations, and Youtube videos. all this has worked fine until sometime in the past month or two. the problem now is that the embedded Youtube videos no longer load, although nothing has changed in the code. unfortunately i don't know exactly when the videos stopped loading.
in the Activity Window of Safari i can see the URLs for the Youtube crossdomain file [URL].. Youtube still for the video, and the Youtube player[URL].. however neither the still frame nor the player skin load.
if i run the site directly from my hard drive (with my Flash Player security preferences set to allow the swf to access the internet), the videos do load and play, so i am guessing that it is some kind of security domain issue. if i run the site in Flash CS3 in debug mode, when i navigate to a video page, although the video loads and plays, i get lots of these warnings (i've edited the path and file name):
[code]...
I'm using SWFObject to embed Flash Videos. Is there a way to get notified as soon as the user hits some specific time marks of the embedded video? I.e. get a notification from the Browsers Flash Plugin?
My goal is to change the page content at specific times of the embedded video.
I've discovered that you can disable annotations on embedded YouTube videos by adding the parameter &iv_load_policy=3 to the url in the embed code.
Example:
<object width="425" height="344">
<param name="movie" value="http://www.youtube.com/v/PMnEvKCtHBw&hl=en&fs=1&iv_load_policy=3"></param>
[Code]....
Is there any way to force this parameter on all YouTube embed urls on a webpage using javascript/jQuery?
(Sort of like this example where you force wmode transparent on all flash objects)
Is it possible to use javascript to seek position of videos embedded on a page (Videos from Youtube, DailyMotion, Revver, etc)?
View 2 RepliesI'm trying to insert an old banner ad into a new Flash site The problem is, the banner I made at 20 frames per second, and the Flash site is set to 41, so it literally plays the banner twice as fast.
View 2 RepliesIs it possible to set the frame rate of a movie through ActionScript 2? Is it possible to check it?
I've found many ways to check the rate at which it is playing, but I want, ideally, to be able to set the frame rate dynamically at runtime. I'm making a timer that uses flashing dots to show each unit of time, and I'd like to create a user interface so that someone playing the swf can set the time intervals without having to open the fla to change the frame rate.
How to get frame rate in as2, how to change frame rate
View 1 Repliesi have to set the stage frame rate according to the frame rate of the flv and I will have differnet flv with different frame rate so i have to get frame rate of FlV using action script ??
Is there any method available in Video Class of ActionScript??
I have button rollovers, that when at 40fps looks really nice, but when i change the timeline to 24fps, it looks terrible.
What is the best way to change my frame rate of my rollver_MC to fps while leaving the entire fla to 24 fps in AS 3.0
I had problems covering videos on Youtube itself but solved that with a design change (don't need to cover them any more).
So I have a script the user can run and it calls a javascript file to do other stuff on the current webpage. One thing it does is bring up a lightbox that covers the page. Of course it won't cover embedded Youtube videos and so I need to do a few changes. I did the necessary changes and it didn't work. I kept trying and trying and eventually made a page with just an embedded video and a .jpg (my script won't run if there are no images).
I looked to see what the Pinterest script added to the embedded video portion and while it was almost identical they did have an autoplay=0 in there so I added it just so I could see for myself that it is exactly the same. If I run the Pinterest script and close it, then run mine, mine works fine. If I run mine, then the Pinterest script, then mine again, mine works. So I believe this means I'm not adding anything that tells the page "Go ahead and put the video on top anyway."
My portion of the script that adds the wmode:
var players = document.getElementsByTagName('embed');
var len = players.length;
for(var i=0;i<len;i++){
[Code]....
How to set different frame rate for different movieclip?
View 1 RepliesI CAN change the frame rate, like this:
[Code]....
But if I want to change these values I have a problem, I could create a button that says 'on(release){ mc1.framespersec(15);' but all this will do is increase the frame rate by 15, not make it 15.
I am creating a flash game that runs at 45 fps. When run either in a browser or on the desktop in Windows XP it looks smooth. When I view it in Windows 7 it is choppy - as if it was running at 15 fps. It is still processing correctly, it just looks bad. Does anyone know why this is? Is it just Windows 7 I have a test code snippet that shows this weirdness. Just paste the following into a new file and publish.
var nCounter:Number = 0;
var nColumn:Number = 9;
var nRow:Number = 5
var aBoxes:Array = new Array();
function setInit(){
[Code]....
Actually I am working in an image scroller project. It was working perfectly. But the client asked to do some updations. First of all please download the file that I have atached, which is a screen shot of user control page for image scroller. There is an user control page for image scroller. You can see many options there. In user control, scroller is specified as marquee scroller. There is an option, Speed of scroller, which denotes how quickly the image should scroll. The unit of this field is seconds. Because we are giving seconds in that field. A single image should move out of the stage with in the specified seconds in "speed of scroller" field.
var UnitDistPerSec:Number = Number(TransSpeed)*10; where "TransSpeed" denotes the speed we are given in the user control page. var FPS = 100; var ScrlConst = UnitDistPerSec/FPS;
[code].....
I have a problem exporting a flash movie to a Quicktime movie with the correct frame rate. When I try to transfer it to a DVD that will play in loop, the video is jerking. I really need to get a 30 fps video.
I'm using Flash CS3 on Mac OS X. I built my flash animation with photos and text only (no SWF or movies linked or embeded, no actionscript, no sound, one scene only). The frame rate I specified in my flash movie is 30 fps. My scene format is 1360 x 768 pixels (16:9).
I need to export my flash movie in an almost uncompressed format to bring it to a DVD.
[Code]...
Currently i m working on a loader.... i want to use this loader on different-different project but every fla file have different frame rate.In that case the animation of the loader is not looking so good.
View 15 RepliesI am working in a flash file, and I wish to embed a new swf. Normally, I would just import it using the video importer, but this swf has controls on it, and I have a feeling they might be lost if the swf is converted to a swf. So, I am now using the loader class to laod it in. Is it possible to make it totally independent to the rest of the fla? One example, I want the frame rate to be different in the loaded swf, to the original swf, is this possible?
View 3 RepliesI recently built a flash movie that I am going to export out into a quicktime movie for YouTube. I mistakenly built it with the frame rate of 12 fps and I need to switch it to 30 to make it compatible for YouTube.
My question is:
Is there an easy way to change the frame rate from 12 to 30 and keep the same timing that I have with the movie at 12fps? The only way I can think to do it is manually, but I was wondering if there is an easier way.
I am trying to get the main timelines frame rate. In AS2 I can detect the frame rate from the outside in my main App, but I can not find the AS2 code to to do it from with in.In AS3 I can do:
trace(stage.frameRate);
I have a AS2 component that is frame rate dependent. I need to have it detect the FPS instead of passing FPS variable to it.