flash video that incorporates buttons to share to sites like twitter or facebook? For example at the end of a video at youtube you are presented with a share button. At vimeo there are links on the right hand side of the video for like, share, embed, etc. Are these buttons (i.e. links) added during creation of the video or are they added by the site itself?
I am trying to build a small site that allows a user to upload videos and have a 'share to facebook' and 'share to twitter' button show up in the video when the video is done playing.
I want to be able to share videos from my Wordpress site to Facebook using different video providers. I was able to use my own video player, but I'm not ready to post videos using my server and I prefer to have users post using a provider like youtube, vimeo, facebook, ect.. Right now my site has those kind of video players. I edit the meta tags several times, this is the one I currently have:
[code].....
I also tested it using a single youtube video and it worked fine. But since I have other videos beside youtube I can't do it where it just gets a youtube id. Yesterday the posts without videos were showing up, but now when all posts gets share it shows up like if it was a video on my wall, so if clicked it will give an error. I been pulling my hair all week with this and still couldn't get it to work.
when I update my script, it takes so long for facebook to update the change. I have to wait for so long in order to test it again, like if facebook is holding it in cache for too long, is there a way to bypass that?
I'm experimenting with CSS transforms and I noticed that embedded videos (like for instances the ones from youtube) don't behave as expected when a CSS transformation is applied to them.
I've tested this in the latest Chrome, Firefox and IE and none of them was able to display transformed videos.Is this a bug of sort, or are videos not supposed to obey to CSS transformations? Not even using html5 in Chrome solved the issue.
I want to be able to stop all embedded flash videos on a page. For example, I have 3 flash movies on a page. If one is playing, I want it to stop if another is started.
I have just got back to programming flash after not doing any in a few years.
i've got a problem with a Flash website that has been driving me crazy. i have a Flash website that was built for us in late 2009, it uses ActionScript 2 and i have been maintaining it in CS3 on a Mac.
the site is structured as a heirarchy of swf files, and loads XML files to specify text content, image locations, and Youtube videos. all this has worked fine until sometime in the past month or two. the problem now is that the embedded Youtube videos no longer load, although nothing has changed in the code. unfortunately i don't know exactly when the videos stopped loading.
in the Activity Window of Safari i can see the URLs for the Youtube crossdomain file [URL].. Youtube still for the video, and the Youtube player[URL].. however neither the still frame nor the player skin load.
if i run the site directly from my hard drive (with my Flash Player security preferences set to allow the swf to access the internet), the videos do load and play, so i am guessing that it is some kind of security domain issue. if i run the site in Flash CS3 in debug mode, when i navigate to a video page, although the video loads and plays, i get lots of these warnings (i've edited the path and file name):
I'm using SWFObject to embed Flash Videos. Is there a way to get notified as soon as the user hits some specific time marks of the embedded video? I.e. get a notification from the Browsers Flash Plugin?
My goal is to change the page content at specific times of the embedded video.
I had problems covering videos on Youtube itself but solved that with a design change (don't need to cover them any more).
So I have a script the user can run and it calls a javascript file to do other stuff on the current webpage. One thing it does is bring up a lightbox that covers the page. Of course it won't cover embedded Youtube videos and so I need to do a few changes. I did the necessary changes and it didn't work. I kept trying and trying and eventually made a page with just an embedded video and a .jpg (my script won't run if there are no images).
I looked to see what the Pinterest script added to the embedded video portion and while it was almost identical they did have an autoplay=0 in there so I added it just so I could see for myself that it is exactly the same. If I run the Pinterest script and close it, then run mine, mine works fine. If I run mine, then the Pinterest script, then mine again, mine works. So I believe this means I'm not adding anything that tells the page "Go ahead and put the video on top anyway."
My portion of the script that adds the wmode:
var players = document.getElementsByTagName('embed'); var len = players.length; for(var i=0;i<len;i++){
I've just been called onto a bug in an application that I didn't build.We have a master application, running at 40fps, which loads .swf components with embedded movies in.Last week, all the videos started playing too fast.The videos are rendered to .flv at 25fps.Is there a way to enforce that embedded videos retain their native frame-rate?
I have a file that uses buttons to play a series of videos. I want to have the button for the currently playing video to stay in the 'down' state while it plays but I don't know how to do it.
I have my stage with the FLVPlayer and its easy enough to get it to play one video, but I have a series of buttons on the right hand side (day1, day2, day3.. etc).How can I go about getting a button click to change the FLV srouce and begin playback? And do I need to stop the loading of the previous video, or is that handled automatically?
I am trying to add several FLA videos on the same flash page and control them with different navigation buttons.So, Button 1 to play video 1, Button 2 to play video 2, etc .I have already put two navigation buttons and added two videos.However, I need to know Action Script to enable navigation button to do above.
I want to do something like: Main.mxml <s:HGroup id="animals"> <s:Button name="dog">Dog Name</s:Button> <s:Button name="bird">Bird Name</s:Button> <s:Button name="cat">Cat Name</s:Button> </s:HGroup> [Code] ..... Do I have to extend the Button component or how should I proceed?
I have embedded a flv video into my timeline, it uses the flv playback component to play and the SteelExternalAll.swf skin. I would like to control this flv using buttons that I have created that are postioned next to the video player. Ideally, these buttons would be thumbnails, similar to chapter thumbnails on DVDs and would serve a very similar function. As these thumbnail buttons are always present, I want them to change while the movie plays, I think a border around the currently playing would suffice.
The video is nearly 3 mins long, I have made cue points from Sorenson Squeeze.
I am creating a stand alone DVD to be used with Flash player. I am wanting to add different videos that play with different buttons. The following is the code I have for the video to play when the corresponding button is clicked..... My problem is how do I get that video to "leave" and stop playing when another button is pushed to play a different video.
Educators_btn.addEventListener(MouseEvent.CLICK,clickEducators); function clickEducators(evtObj:MouseEvent) { gotoAndStop("OE")
I'd like to gain read only access to the following parameters of embedded Flash videos located on sites that I do not own through my own custom browser extension/add-on:
Time location of playback head (so I can display the current time in the browser extension via HTML5/JavaScript) Frames (so I can make capture them to an image file, save it and display image in browser extension) Original Dimensions in pixels (so I can display the original video dimensions via JS/HTML5 in browser extension)
Is this possible by using Javascript and HTML5 from a browser extension?
Would I have to use something like the SWFObject Javascript API [URL]
I made a flash mp3 player and it works fine in any other test pages. but when i embed it onto my site it just shows blank. what do i do? my site is [URL] and the flash player i tested here [URL] and it plays. What im i doing wrong? i tryed everything. right now i just got it in a iframe but i dont want that iframe.
Looking at the attached file, why does bottomScrollV give me the wrong value when the text is dynamically embedded and correct when manually embedded?
Here's the code: ActionScript Code: var loader:URLLoader = new URLLoader(); loader.addEventListener(Event.COMPLETE, onLoad); loader.load( new URLRequest("info.xml") );
I am customizing Google Maps for Flash.I have an external .AS file for my document class and one .AS file that extends the look of the Google Maps popup window.I am importing the locations of many apartment buildings from an XML file. The XML is being read in the main .AS file.There are textfields I need to populate in the popup.AS file but I don't know how to get that XML information from the document class .AS file into the popup.AS file. I wouldn't think I need to run an XML loading function in the popup.AS file right? how I can get variables from one .AS file to another?
How would I set it up so that I can share a single piece of art across multiple files? My goal is to arrange it so that I can edit the art in the original file and automatically update the art in all files linked to it when published?
For example, I'm working on a character animation where the character appears in many episodes and the episodes are split into many .fla files. If I needed to change the appearance of the character in all of the episodes which are spread across many .fla files, I would I have to do it manually?
Say I create a swf and in it, I have two dynamic text fields. I do all the usual stuff like give these text fields instance names. I call this swf1.Now say I load swf1 into another swf, say swf2. Can I set the values to be placed into the text fields in swf1 from within swf2?
As you know, we could build a RIA application based on flex. Also, we could build an desktop application based on AIR. I have a question, If we want to build web & desktop application simultaneously. Could we use the same codes to ship our production to web & desktop?
Are there any off the shelf components for adding a screen sharing feature to my app?I've built real time text chat for a group chat room - now I'd like to have a button where a user can share their screen with the other members of the chat. Basically, I'm looking for a way to add this feature as easily as possible:
