ActionScript 3.0 :: Go Back To Previous View?
May 31, 2011
I'm new to Flash and Actionscript and have been creating an interactive map. I've added checkboxes to view or not view different clickable map points which have popup text.
My question: all the checkboxes are checked when the map is opened, but after selecting /deselecting the checkboxes, the map point is clicked, the close button on the popup takes the user back to the original frame. Is there an actionscript code that takes me back to the previous view, rather than a particular frame?
View 7 Replies
Similar Posts:
Jun 25, 2004
my program is i can choose several movie to load and the movies are save in an array... For example: i choose movie 1 , 2 and 3. Movie 1 was loaded. After i lick 'next 'button, movie 2 will be show .Beside that,if i click 'previous' button, movie 1 will be show. i facing a problem that my previous button is not back to my previous loaded movie but is trace my choices in arrays backward. The next problem is, my first movie load to the second movie load will be a bit lagging. but the rest 1 is ok.
View 14 Replies
Nov 8, 2011
In my apps, i would like to:
1)have a pop-up menu when a button is touched, then ok to close but still in the same page as it is
2)invoke the popup menu by using samsung's "MENU keycode",then ok to return the same page as it is
3)having the user to swipe 5 images to view them, left image as 1st and 5th image as last image with smooth transitions
4)and also using the "BACK keycode" to go back to previous page
View 3 Replies
Mar 18, 2011
Am creating a two page document in flash cs4. Each of these 2 page documents have links to a learning resource on a web server.All I want is for the user to be able to navigate to and fro this two page document. Infact, I want to be able to click on a NEXT button to go the the nextpage and PREVIOUS PAGE button to go back to the previous page.
View 1 Replies
Nov 23, 2010
im using cairnform framework as3 and i have a single swf file, and i m searching a while for back button to go back a previous screen with all data's which r there previously.
View 0 Replies
Dec 9, 2008
I've got a bunch of movieclips lying on top of each other like a stack. When you click one, it slides out, and comes forward. When clciked again it goes back and slides back into the stack.inside the movieclips iv'e placed:
Code:
this.swapDepths(1);
along the timeline at a spcific frame.I need to make it get the same depth value as it had before I clicked it when it goes back. Basicly:
Code:
this.swapDepths(same-as-before-the-swap-to-depth-1);
I guess I need som kind og listener to logg the changes made...
View 1 Replies
Nov 6, 2002
I'm tryin to create a button that sort of "rewinds" but it doesn't have to show the rewind- all i want it to do is jump back to the previous frame with a stop action on it. So kind of like a "back" or "previous" button.It's been a while since I have programmed a lot and I forget everything
View 9 Replies
Jul 16, 2009
I posted this question yesterday, with no responses, hoping for better luck today for such a vague problem. Pretty much, I have animated mc buttons, that over the course of the website interaction (various transitions) move around the site area. Unfortunately, after doing their big transition once or twice, they are animating to previous frames actionscript... in other words, if my btnA is in a differenct position due to these transitions, when I click it, it animates "from it's previous position"... does that make sense? Is there anything I can do to be sure that all previous code is dropped for the current frame code? seems odd, but there must be a way to do this cleanly?
View 2 Replies
Sep 21, 2003
lets say i have 5 scenes in my fla file, how can i put a <b>"Back Button" </b> in each of the scenes and make it go back to WHICHEVER scene i was at previously?some actionscripting / javascripting on my button perharps?a really simple script that will work exactly like:<A HREF="javascript:history.go(-1)"> as in in html
View 6 Replies
Oct 18, 2011
I started a tutorial about creating a flash slideshow. This is the as2 code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var myShowXML = new XML();
myShowXML.ignoreWhite = true;
myShowXML.load("slideshow.xml");
myShowXML.onLoad = function() {
[Code] .....
The link I got these functions is this: [URL]. How can I adjust these functions to my slideshow?
View 4 Replies
Jul 27, 2009
How can i get the previous page information when clicking on ButtonFor example: i have a two pages, i moved from one page to another page, when i clicked on Button . i should get the first page information same like Back button functionality. Like, this can be acheived in JavaScript as history.back();
View 3 Replies
Aug 31, 2009
I have a function with some if and else...if statements in a particular frame. In this assessment program, the user goes to other frames, then evaluates several variables at the end. If the user gets more than 3 wrong, the user goes back to the scenarios that were missed (i.e., a particular frame label). When I have tested this program, I can get back to the right frame/scenario, but a particular button's function won't work. Is there something where I need to "reset" this function the second time the user goes through it because it remembers what was done the first time?
View 1 Replies
Jan 3, 2009
I have a project that have lots of Scenes (50 or so with lots of buttons that link to movies, in most cases I have several buttons linking to the same movie) So..I created a scene called "movies".I have about 90 movies on each frame (90 blank keyframes) with a stop action , FLV Move Progressive download, and a back Button on each framewhen the user clicks on a that back button I want the program to go back where the user just was, Not the Previous Frame with in the timeline or scene.
View 1 Replies
Mar 23, 2010
I am trying to find a way to get my menu bar working. Little info, I am a beginner in Flash just learned the essential DVD from Adobe. My menu bar has the following: (About Us) (Services) (Quality) (Projects) (Contact Us) Each page will have a motion shape tween and slide the page down. I have type in this actions :
[Code]...
This actions only works when I click to the next labels but doesn't work when I want to click back to the previous labels. For example, if I click onto (About Us) to (Services) and (Services) to (Quality) and (Quality) to Projects and (Projects) to (Contact Us)... it all works. If I then click from (Contact Us) back to (Projects) or even any previous buttons.
View 3 Replies
Apr 24, 2008
Basically, I have a flash app with various frames, each frame contains a "help" button, which when clicked takes the user to one seperate frame with various informative instructions on it. The help button is like a universal tool incase the users need help.
Now, no matter what frame the user is on, if they click the help button, sure enough, it takes them to the "help" frame. The big problem I have, is that I cannot fathom a way to make the users RETURN to the exact frame they came from.
For instance, the user is viewing a frame in the app called "Question 2", they get stuck, they click on the "help" button, it takes them to the "help" page. After veiwing the instructions, they need to return to the question 2 frame, possibly by clicking a "back" button of some description. Likewise if they were on a frame called "Question 3" - they need to return to this frame if they click the help button.
In a nutshell, I need to create a button that takes the user back to the previous frame from the "help" frame, like a dynamic link back or something.
View 9 Replies
Jul 23, 2009
I have a large swf that needs a preloader. With a normal preloader it took a couple seconds and then came in loaded halfway through. To solve this I created a small swf that loaded first and then loaded the larger swf through this one.
[Code]...
My problem: when the user goes back to the menu and tries to view the larger swf again the script that checks if it has loaded (and it has been loaded completely already) does not fire and therefore the file will not play again.
View 1 Replies
Mar 29, 2010
[Code]....
I need to make the back and forward button that goes to the next/previous block in XML file.
View 4 Replies
Dec 3, 2009
I am using this collapsible panel - link. Unfortunately, I have a problem using it with application states. I have a state where this panel is visible, when I switch to this state, this panel shows, when I click on it, it opens and its content shows. If I switch to another state (this panel is removed from display), and then switch back to the previous state, the collapsible panel stays open, but its content disappears. In other words, the collapsible panel's content doesn't persist through states. Anyone know what the problem is? Or is there another collapsible panel that can work around this issue?
View 2 Replies
Nov 19, 2011
In Flex 4.5 for mobile is it possible to check if there is > 1 view on a navigation stack and display a back button accordingly? If so how can I do this?My application is based ons:ViewNavigatorApplicationI'm adding a back button like this
<s:navigationContent>
<s:Button label="Back" click="backButtonPressed(event)"/>
</s:navigationContent>
[code]......
View 2 Replies
May 13, 2010
I need to return to my original function after capturing an event (downloading something) with another function. The original function needs to return a value, which depends on the downloaded data. So, I'd like to pause original function for the time needed for the download and the eventhandler function to complete it's work, and resume it afterwards.
The obvious way is to set a flag value (both the original function and the eventhandler are within the same class) and make the original function check it until the eventhandler function changes the flag. But that would be wasteful, and my AS is slow enough already:) [other parts of the application utilise some heavy graphics]. Is there another way? Like an event that gets captured "in the middle" of the function? Or some other form of flow control?
View 2 Replies
Jul 26, 2010
I am trying to work out this issue in as3 and I'm sure its simple but can't seem to get my head around it. If anyone can see a sollution I would be very happy to hear from you. [URL]..If you click on the red button and click back and previous you will notice that the speed it goes back when you click previous is much slower the further through the slides you go?
[Code]...
This is a simplified version on the code, I'm sure its in this chunk somewhere.
View 4 Replies
Mar 2, 2006
I have various movies clip within a movie and my back (mc = arr2_mc) and next (mc = arr1_mc) buttons are on the main scene.This is on my main scene on a first frame
ActionScript Code:
movieclip.prototype.playBackwards = function(arg){
if(arguments.length>0) {[code]....
when it goes back, it goes back frame by frame without stopping but I want it to go only to previous Scene. instead of going to previous frame.Do i have to create a unique button? which i did but i didn't work?
View 2 Replies
Aug 3, 2010
I'm about to have to write a web page/app that will serve the agenda for circa 100 people on a page. One line per person, one column per day with 3 clickable zones in each cell. In HTML, the page is way complex for the browser to load quick and there is no possibility to click on a border between 2 cells to for example split an event that spreads among several cells. So I search an not too overkilling technology to render this kind of view. I begun with a PHP generated HTML page but the number of elements in the page make the mouse move jerky.
Moving to JAVA would give me better performances regarding the reuse of the generator of the view but it will still be an HTML page. So, here is my question: do you think that going forward with JAVA and its graphical capability is the simple solution or is Flash a better option for this part of a Web App? I'm afraid of the code I'll have to write in JAVA to handle the GUI presentation as well as the events generated by the 1000's cells plus borders of the page. In Flash, the graphical part seems simpler even if the actions handling is still huge.
View 2 Replies
Aug 15, 2011
I'm currently using RobotLegs with the Presentation Model pattern to develop a Flex 4 project. I understand that all business logic related to a View resides in the Presentation Model associated with that view, however, I am confused when it comes to View specific logic.For example, I have an indicator that needs to be positioned relatively to list items depending on which list item is selected. Is it acceptable in the Presentation pattern to put the logic that will position the indicator in the View and simply have that logic run in reaction to a selectedIndex property changing in the presentation model?The reason I am considering this is that since the Presentation Model does not have a reference to the view it is difficult to come up with an ideal solution for manipulating view components.
View 1 Replies
Mar 18, 2010
I am wondering how to make a 360º view bubble, like they use for Google Street View, but have no idea how to go at accomplishing this task... i have the string of photos that i attached in photoshop(so that if you connected the left to the right it would be a full 360º view).
View 1 Replies
Nov 25, 2010
I am using Flash CS4 AS3.. When I open my browser "Internet Explorer 7" it opens normal. But When I open a link using the following Flash code it opens half in length and half in width. I need to click on "Maximise" button to view in full. How to solve the problem? It is our Intranet link.
PM3.addEventListener(MouseEvent.CLICK,PM3ClickHandler);
function PM3ClickHandler(event:MouseEvent):void { navigateToURL (new URLRequest ("http://engineering/history/thisyear/ceomessage.htm"));
}
I tried modifying the line as well. It also doesnt work.
navigateToURL(new URLRequest ("http://engineering/history/thisyear/ceomessage.htm"), "_blank");
View 3 Replies
Jun 13, 2010
I have one .mxml file (the Application) with a ViewStack (with 4 views) and a ControlBard, obviously I can change the views with it, but what I want to do is: in view #1 I have an image which I want to convert to a "hyperlink", so when I click it I go to View #2, is this doable? Also I would like to pass somehow some data (like a String) to that View #2 (lets say the it's a user avatar I click so I want to go to the second view which will show me his profile, that's why I need his name/id).
View 1 Replies
Sep 28, 2011
My problem is that when I try to pass an object from the navigator.pushView(view, dataobject), I can't figure out how to access the dataobject from actionscript. I can access {dataobject.property} from MXML easily, but I want to set a variable in the new view to the passed dataobjects property.
View 1 Replies
Oct 8, 2009
in flash, I encounted a source file that is cropped and I cannot move it, is there some sort of cropped view in flash I dont know about? I cannot find anyinformation about it, it has rulers displayed as far as I remember.
Basically you cannot move in the file to edit anything viewpoint wise, everything outside of the movie area is invisible and not there? As if cropped.
View 0 Replies
May 2, 2005
What is the script used to go to previous frame viewed as opposed to (see below) previous frame on timeline?
View 3 Replies
