Actionscript :: Switching Back Into Previous Function From Event Handler Function?
May 13, 2010
I need to return to my original function after capturing an event (downloading something) with another function. The original function needs to return a value, which depends on the downloaded data. So, I'd like to pause original function for the time needed for the download and the eventhandler function to complete it's work, and resume it afterwards.
The obvious way is to set a flag value (both the original function and the eventhandler are within the same class) and make the original function check it until the eventhandler function changes the flag. But that would be wasteful, and my AS is slow enough already:) [other parts of the application utilise some heavy graphics]. Is there another way? Like an event that gets captured "in the middle" of the function? Or some other form of flow control?
View 2 Replies
Similar Posts:
Aug 31, 2009
I have a function with some if and else...if statements in a particular frame. In this assessment program, the user goes to other frames, then evaluates several variables at the end. If the user gets more than 3 wrong, the user goes back to the scenarios that were missed (i.e., a particular frame label). When I have tested this program, I can get back to the right frame/scenario, but a particular button's function won't work. Is there something where I need to "reset" this function the second time the user goes through it because it remembers what was done the first time?
View 1 Replies
Jan 10, 2010
Is there a way to get the handler(s) function(s) of an event listener?
I'm trying to find a way to remove them without knowing what they are.
For example:
ActionScript Code:
if (mc.hasEventListener(MouseEvent.CLICK)){
// this object has a MouseEvent.CLICK listener
mc.removeEventListener(MouseEvent.CLICK, null );
}
Instead of null, I was hoping to find some function that retrieves the handler function.
View 7 Replies
Oct 19, 2005
Does anyone know if there is a way to get the name of the function that my code is running inside?
Code:
_btn.onPress = function () {
trace(something);
}
this would then output "onPress" or something like it...
View 2 Replies
Dec 17, 2011
Below is my AS3 code:
[Code]...
If I run add('movie123'). How do I get the string 'movie123' in the enter_frame_handler function? UPDATE This forum post (Click Here) describes the issues I am having but doesn't provide the solution I am looking for. Luckily @kapep provided a simple solution that solved the issue.
View 4 Replies
Aug 14, 2007
i have simple question about how to call a function on a class but i dont know how to do it,I have a class :
Code:
class MyClass{
private var lvSendState:LoadVars;
[code].....
View 3 Replies
May 8, 2011
I want to call the same event handler function with a click and also with a custom event. the problem is the event type that needs to be passed to the function. Is there are generic event type that can be used to call the function from both places?
Code:
menuBtn.addEventListener(MouseEvent.CLICK, menuOpen );
function menuOpen(event:MouseEvent){
[Code].....
View 3 Replies
Mar 31, 2009
Ok, I have 2 buttons on the stage. Each button does almost the same thing, so I want to create a single function, and each button calls that same function (we'll name that function "Navigate")... however, the function will need to end up doing something different dependant on which button was clicked.So, previously, in AS2, I would've added some code onto the buttons themselves with on(release) methods, like so:
Code:
// Define the Navigate function
function Navigate(myLabel){
[code].....
View 7 Replies
Mar 31, 2009
Trying to migrate my way of thinking from AS2 to CS4/AS3. Ok, I have 2 buttons on the stage. Each button does almost the same thing, so I want to create a single function, and each button calls that same function (we'll name that function "Navigate")... however, the function will need to end up doing something different dependant on which button was clicked. So, previously, in AS2, I would've added some code onto the buttons themselves with on(release) methods (see CODE EXAMPLE 1) So, each button effectively calls the Navigate function, and passes a different frame label to the function. Now, I'm trying to recreate this functionality in AS3. As you all know, on(release) has been done away with (still don't know why), but we now have to use event handlers, so I'm trying to figure out a way to pass a different frame label argument to the Navigate function. Currently I can achieve that by using a switch statement to test which button was clicked, and act accordingly (see CODE EXAMPLE 2).
[Code]...
View 2 Replies
Oct 19, 2009
I created an array with movie clips now how can i target one movie clip with event handler function . so that when i clicked on one movie clip a message should be displayed
View 4 Replies
Jun 23, 2010
I have an action listener :myText.addEventListener(TextEvent.LINK,linkClickHandler); As according to this, i need to write an event handler function seperate to handle the text link event.Now my requirement is i need to write that function in the same line isntead of giving its name.ie, something like mytext.addEventListenet(TextEvent.LINK, function(event: TextEvent) {....code comes here....});
can i do like this in AS3.What will the syntax for this if possible.Also i want to know, wether i can pass one more extra param to the event handler other than event which is the default parameter.
View 1 Replies
May 8, 2011
I'm trying to get a quick replay command, "pressing space returns the scene to the previous frame".
[Code]...
The current function returns me to a previous frame (40), however the event does not stop, rather it keeps on adding new events ontop of each other once it returns to main frame. The main frame being where the actionscript is executed.
View 1 Replies
Jan 14, 2010
im having this errors:
1021: Duplicate function definition function onComplete1(event:Event):void {
1021: Duplicate function definition function stopSound1(event:MouseEvent):void {
1021: Duplicate function definition function backSound1(event:MouseEvent):void {
codes i used:
Code:
var thereReq:URLRequest = new URLRequest("SOUNDS/how.mp3");
var there:Sound = new Sound();
var thereControl:SoundChannel = new SoundChannel();
[code]....
View 2 Replies
Jan 29, 2003
is it possible to write a function to move an object and then call that function on a clip event for instance
function (bounce){
script;
script;
}
and then call it by saying
on(mouseOver){
this.bounce;
}
View 2 Replies
Jul 27, 2009
is it possible to declare function this way
ActionScript Code:
function startShake(e:MouseEvent, num1, num2):void
what i mean is it possible to send to the function not only en event but also a variable and a second question how can i access
ActionScript Code:
function stopShake(e:MouseEvent):Array
this array that function return.
View 1 Replies
Feb 3, 2009
How could i call the same function within a function AND when listening for an event?
would something likt this:
[Code]...
View 5 Replies
Jun 25, 2004
my program is i can choose several movie to load and the movies are save in an array... For example: i choose movie 1 , 2 and 3. Movie 1 was loaded. After i lick 'next 'button, movie 2 will be show .Beside that,if i click 'previous' button, movie 1 will be show. i facing a problem that my previous button is not back to my previous loaded movie but is trace my choices in arrays backward. The next problem is, my first movie load to the second movie load will be a bit lagging. but the rest 1 is ok.
View 14 Replies
Dec 28, 2011
I'm trying to make a CustomLoader class that extends another class.In the contructor of my CustomLoader, i need to call super(myLoader:Loader) where myLoader is a Loader object. Problem is I need to listen to the complete event of the loader before passing it or i'll get an "Error #1009: Cannot access a property or method of a null object reference". but if i put super() in a handler function i get an "Error 1007: A super statement can be used only inside class instance constructors."
Here's part of my code:
Code:
public class CustomLoader extends ParentClass
{
...
public function CustomLoader():void
[code]...
View 14 Replies
Feb 11, 2011
I'm trying to start a function from within a click handler that is being triggered when I load some XML, just like this:
Code:
function LoadSomeXML(e:Event):void {
thumbContainer_mc.addEventListener(MouseEvent.CLICK, thumbClick);
} function thumbClick(event:MouseEvent):void {
startImgSlider();
} function startImgSlider():void {
trace("ok, now you reached 'startImgSlider()' function !!!");
}
The problem is that I cannot reach the startImgSlider() function with the code above. How to do it right. Has something to do with the scopes?
View 3 Replies
Jun 19, 2007
I am having problems with a ChangeWatcher.Everything seems to be set up correctly.The canWatch method returns true, the isWatching method returns true and if I query the return value of the getValue method I get the correct information, including changes. But for some reason the handler function just doesn't fire.
View 1 Replies
Nov 2, 2010
I'm trying to add a custom callback handler to a NetStream client in a p2p application. The problem is, when I add such a handler, the NetStream Client doesn't function as it did before. It seems the NetStream.client object is changed. I know the default object is this. But changing the client to this doesn't solve the problem.The remoteControlStream, is the incoming stream. And the localControl stream is the stream being publishedThis is the localControlStream that's being send by the peer, and received as remoteControlStream:
private function initLocalControlStream():void{
localControlStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS);
localControlStream.addEventListener(NetStatusEvent.NET_STATUS, localControlHandler);
localControlStream.publish(myPeerID+"control");[code]...
The onPeerConnect method of the localControlStream doesn't get called when I connect when the above handler is added. When I remove the that handler, the onPeerConnect method gets called.
View 1 Replies
Oct 28, 2011
I've created a button (type: MyButton) with two child, a text (TextField) and a image icon (type: MyIcon). Then I've append an eventlistener mouse_click on my button. As soon as I click on the text, the e.target on the handeler function is recognized of MyButton type. Otherwise, if I click on the image icon (child of button) the e.target is MyIcon type, instead of MyButton. How can I prevent this? I need all click to be recorded on the button, where I've stored some attributes I need on handler function.
View 1 Replies
Jun 17, 2009
how to achieve next and previous button function such as the one at [URL]
View 5 Replies
Dec 6, 2010
here is the code (see below), i want to create a previous and next button on this script, which allows a user to cycle through the xml file ( that contains links to my images).I need a little bit of code in the 'button_mc.onRelease = function()' that makes sure im going to the next picture in my xml filehere is the current code:
// xml object for xml content (defines sources for selections)
var portfolio_xml = new XML();
portfolio_xml.ignoreWhite = true;
[code].....
View 3 Replies
Jun 7, 2010
i bought this gallery online and it looks really cool but i am trying to add some more to it but is not easy.
1) i would like to add a next and prev function to the xml gallery, buttons that can advance the images just by clicking left or right with the mouse
2) I'd like to add a caption text that stay still(the one that is there moves on rollover action and is added to each thumbnails but i deleted them) and that will show the caption everytime i press a thumb, basically an info text box that communicate with the xml.
View 1 Replies
Dec 31, 2009
I am looking for a way to programmatically dissassoicate the click handler function from a button on my mxml component through actionscript code.
Something like what older actionscript let you do,
mybutton.click = null;
View 2 Replies
Apr 30, 2010
I've coded this small snippet to show what I'm not understanding:
[Code]...
Shouldn't I be able to read loaderInfo inside the creationComplete handler? I'm trying to pass a string from the html to my flash component, that's why I have to get loaderInfo working.
View 1 Replies
Nov 1, 2010
I've got a Vector of ViewToActionMap objects, which have following constructor:
public function ViewToActionMap(_forModule:eModule,
_forAction:eViewAction,
_toFunction:Function,
[code].....
View 1 Replies
Oct 22, 2011
Why isn't this working as I am thinking it would:
var i:int=-1;
for each(obj in myData)
{
i++;
[Code]....
If I add i to an array (like myArr.push(i)) it will have 3 elements, 0, 1 and 2.
View 2 Replies
May 6, 2007
whenever I try to call the removeMovieClip function in a callback handler, it just doesn't work! Maybe I'm tired, or I've just missed something this is apparantly obvious. In my code exert below, is just a simple script that attaches a movie clip to stage (square_mc) and creates a duplicate instance. When the component button is clicked, I want the original movie clip to be deleted, but nothing happens!
Code:
this.attachMovie("square", "square_mc", this.getNextHighestDepth());
square_mc.duplicateMovieClip("square_mc2", this.getNextHighestDepth(),
{_x:50}) var listener:Object = new Object;[code].............
View 3 Replies