I have this game where there are moving targets(I move them by code) and you need to click them and every time you click them you get 5 points and they disappear I also made a 30 second timer to and when it hits zero it goes to a frame 7 (Game Over frame).[code]
View 4 Replieshow to stop a single movie clip in flash and other movie clips still looping. I tried stop(); and myclipname.stop(); both are not working. I attached a simple file,
View 0 RepliesIs there a way to do stop/pause all the movie clips inside a Big movie clip? I wanna control the movie clips as well with a slider. Yes i can control the Big movie clip yet i couldn't control those movie clips lie inside that Big movie clip.
View 9 RepliesI have been trying and trying this, with no luck. I have 5 different movie clips all exported for action script and all executing different tweens. At the tweens end I want all the movie clips to stop but one.Nothing seems to work! I have been using this[code]...
View 1 RepliesSo first of all i want to make a game where you click on moving targets(i move them with actions) and when you click them they disappear so i want to make a pause menu.
View 9 RepliesI have an online banner with a 15 second time limit. There is a looping movie clip within the banner, and I need a way to stop that movieclip after 15 seconds.
View 4 Repliesi have an external video that i have placed in a movie clip. its to be used as a flash banner for a website. my problem is the video plays once and stops... i have no stop code and i have tried a few different actions to make it play. even a simple one like gotoAndPlay (1); etc. i'm using CS4. i've tried using action script 2.0 & 3.0 but no luck.. as well as building script on the movie clip, on a frame and its own layer.
View 1 RepliesHere it is..I have 3 frames on my timeline
Frame 1 -page 1
Frame 2 - page 2
Frame 3 - page 3
obviously there are several layers on there too, and on them there are Three buttons which I want to click on to get to each of the three frames. But every time I follow a tutorial nothing seems to work.I have taken out all the script that the various tutorials have told me to enter and only have two stop commands for two Movie Clips that are also on the stage.If I give you the following information could someone please write the script for the three buttons to link to frame 1,2&3
the instance names are
home
price
contact
I am using actionscript 3.0
I can't get the movie clips to stop and start in this file. I used the code snippents but it didn't work. In fact after the first movie clip the rest of the movie won't play... It just stops there and loops the first movie clip. I can't seem to attach the flv and the action script files here in the forum... But you can download the fla file here:[URL]
View 1 RepliesI have several movie clips playing in sequence for which I have de folowing code:
ActionScript Code:
movie2_mc._visible = false;
movie3_mc._visible = false;
[code]......
I have a barometer activity flash program. It's weather themed and at each stage of the barometer fill, a movie clip appears that has as-generated weather icons (i.e. rain, clouds) floating across the screen. The problem is once I click to the next level of the barometer, the weather icons keep flashing in the upper left corner. I tried putting clearInterval in various places but it didn't seem to do anything.
View 7 RepliesI have created a website on the time line. There is actionscipt contolling which frame to play via a button. Within this button is a movieclip with a fade in using alpha on its own timeline with a stop(); at the end.The problem is I only want it to play when you first see it from moving to that page from the main timeline. Currently if i move over the button it plays the movie again which i dont want to happen. I do however want to retain the over states etc for the button.
View 2 RepliesI have a fire animation that i want to freeze (ha!) on the last frame of my swf. So basically the fire is buring and i want all the tweened flames inside duplicated MC to stop so it looks like a snapshot of whereever all the flames currrently are.Everything else in the movie is stopped too, so i was wondering if there was a global stop all motion command or the best way to freeze my fire
View 2 Repliesi tried following a tutorial to create an animated button. it's not functioning i originally had the animation in frames and it worked somewhat. if you test the links_1.swf, it functions as i had hoped but if you activate the button quickly, the timing gets messed up and the animation sticks. file:///Users/GS2/Desktop/links_1.fla then i tried to set the animations in movie clips and they won't stop. file:///Users/GS2/Desktop/links_2.fla i tried including the fla files for reference.
View 3 RepliesAnyway, I am just trying to figure out movie clips as buttons, and have been following along on however, I seem to be doing these things right, but when i test my movie, the button just loops regardless of rollovers or stop actions.You can check this addressto see the failed anim, and you should be able to import it as well. Here is my coding:
function rollover (e:EVENT){ myBtn.gotoAndPlay ("in");}
myBtn.addEventListener (MouseEvent.MOUSE_OVER, rollover);
function rollout (e:EVENT){ myBtn.gotoAndPlay ("out");}
[code]....
I'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
I'm working on an animation where I have my "dog" fighting the evil vacuum cleaner. I got most of it to work the way I want it to.
1) I have movie clips entitled pepper_mc (where my dog is supposed to be walking), swirl (where a swirly-type symbol is supposed to spin over the dead vacuum's head), and vacuum_mc (where the evil vacuum is supposed to have a swinging arm (called vacuumarm_mc) that I created using the bone tool). When I add them to the stage and test them, the animations within the movie clips don't happen.
2) I have background music that I'd like to stop playing at the end of the animation, but I'm not sure how to do that. (using the stop(); actionscript doesn't help).Where am I going wrong? I'm using Flash Pro CS5.
Here's the file --> Pepper and the Vacuum of DOOM!
As most of you don't know, I've been creating an rpg game. And, after several tries of art making, etc, I have finally moved back into coding the game. And now, I'm stuck on the equipment system idea. At first, I thought I would just place a bunch of goToAndStop's for each movie clip to go to a frame that has that certain armor piece. This was my first idea for an equipment system. However, after doing some research, and realizing how much lines of code could be saved, I started looking into simply adding and removing movie clips from the character as my new equipment system idea. Now.... on to the problem.
Basic want/ overall achievement wanted: Create an equipment system, which will basically attach movie clips (items) onto characters, which themselves will already be attached movie clips on the stage.
Problem: What is the exact code to do this? And Is there a better way to do this for an equipment system (a less laggy or more efficient way perhaps that I'm not seeing; Check the code below to get a better idea of what I'm talking about)?
Part of the code (or basic idea of code; see comments for extra details
code:
//Don't worry I have an OnEnterFrame function here;
//attachedObj= the character; figure= the MC name of the character;
attachedObj = attachMovie("figure", "figure"+1, 1);
[Code].....
I have multiple movie clips on stage (all in separate layers, of course) as well as buttons on stage to play each movie clip. There are buttons inside each movie clip. The problem is that the buttons inside the top layered movie clip work, but the others in the movie clips below don't.
View 2 RepliesI'm making a shooting game but there won't be much of a challenge without enemies that point and shoot. Is there an easy way to make them do that?
View 5 RepliesHow would one go about masking movie clips that are nested within other movie clips?
I have a photo gallery slider type of thingy that loads jpegs with loadMovie into containers. I can mask the entire movie clip but as for the containers,...well I just dont know whats going on here.
After the dublication of an movie clip,
1. I would like to be able to delete one by one the new movie clips
2. I would like to move them all together.... First you press the word green and then click in the blue area.... A green cyrcle will appear.. Click the word green again and then in the blue square and a new green cyrcle will appear. I would like to move the cyrcles with the buttons arrownd the blue square... And when I press delete I would like to delete any cycle I choose... The flash is too large to attach it to the forum, if anyone is interested I can send it by mail.
I have three buttons, btn_1,btn_2,btn_3, and two movie clips, image_1,image_2. The names listed btn_1,btn_2,btn_3, image_1,image_2. are all instance names. All buttons and movie clips are on their own layer in a single frame on the main time line. the movie clips have a stop action on the first and last frame, with a frame label, on the first frame in the sub time line. For image_1 the frame label is image_1_1 and for image_2 the frame label is image_2_1.
I would like btn_1 and btn_2 to control the movie clips, image_1,image_2. Either button should be able to close the other buttons movie clip and play it's own movie clip. Also i am trying to make the movie clips themselves have the ability to be closed by clicking on the movie clip image area that is playing. Both movie clips when not playing hide behind the appropriate button with an alfa of 0.
When playing they expand to the middle of the window and are at 100% alfa, using a tween. The third button, btn_3 should only be visible when one or the other movie clisp are playing. btn_3 dose nothing else but this for now. As of now, my movies continuously loop and btn_3 is always visible. I can't seem to figure this out. my code for this action is:
[Code]...
Does anyone know a good reliable way to get movie clips to point at other movie clips? I use MX 2004.
View 1 RepliesHere's what I'm trying to do (in example form): I have a movie clip called "dude". Dude is animated to walk around, then drop a cigar (all inside the movie clip). But the problem is, dude moves, so if you try and move dude as the cigar is dropping, the cigar moves with him. So what I want to do is create a new movie clip instance called "cigar" OUTSIDE of the movie clip dude right as he's dropping it, so that you can move him without moving the cigar. Get it? I've attached another helpful animation to explain.
What I have right now is, on the 13th frame of dude, a few lines of code that create and place an instance of cigar. In that frame I also have an invisible instance of cigar for me to duplicate. Inside of the cigar movie clip is the animation that makes it fall to the ground. I need to change that code so that the instance of cigar is created outside of the movie clip dude. Here's the code I have now (inside of dude, on frame 13):
[Code]...
I have a problem stopping multiple clips. I have created a presentation using flash and I have many movie clips which have sub movie clips inside of them. Ok lets look at one movie clip in detail. Inside one _root movie there are multiple sub movies; each with a different movieclip labels (each movie clip is named with unique labels ie. north, south, east, west, and What I need to do is be able to STOP all these sub movie clips with one stop, and in turn PLAY these same movie clip with a second action.
The only way I know how to stop all these sub movie clips is to target each and every one individually.
[Code]...
What I'm trying to do is have my Flash piece have custom elements set by an XML file. I'm using ColorTransform. I have a piece that's loaded as a separate movie clip, and I can't figure out how to get to the piece and apply the ColorTransform.
Here's one example of what I'm doing for a different element on the same mc.
[code]...
So, in this example, I'm setting header_mc to a color specified in the xml. In the case I'm having trouble with, I want to set a color to a movie clip on the timeline and not the main movie
I put the "stop" action at the end of my movie on the last keyframe, but the movie doesn't stop!
View 14 RepliesI am setting up a flash game with seven toggle on/off buttons that all do the same thing.I know how to assign them all to be able to do the same function in the main timeline. What I can't figure out is how to get them all to also do the same function within each of their respective movie clips.
Here's the code:
Code: Select allstop();
DontDrive.addEventListener(MouseEvent.MOUSE_OVER, RO_DontDrive);
DontDrive.addEventListener(MouseEvent.MOUSE_OUT, ROut_DontDrive);
[code]....
I've been trying to reproduce an animation effect I've seen on the Armani website, but I'm stuck trying to duplicate an empty movie clip with image loaded into it. The duplicates exist and I can move them, but they are invisible. Since the duplicates reside on depths above the intitial clip I'm confused about why they are invisible. The duplicates are scripted to follow behind the initial clip - each offset by 30 pixels (though I don't have that working perfectly).
View 1 Replies