I want to load an external swf to the background and then have it resized proportionally according to the browser window so it can fill up the whole screen.
View 2 RepliesI want to load an external swf to the background and then have it resized proportionally according to the browser window so it can fill up the whole screen. Could anyone point me to any online tutorials or show me how to do it?
View 0 RepliesI'm loading external swf into my main project for sub sections to keep size down.My main project is 1280 x 700px in size.In those sub-section I have some content with a scroller.When I load the swf and check the size its ok. But as soon as the scrollbars is initialized scroll bar is initialized the size of the external includes the text that goes off-stage for the sroller.I can resize it propotionaly when after its loader because i have the correct values. But if the user resizes his browser I get the wrong values and my resize code doesnt work because it's height is now incorrect.So is there a way to not include the off-stage elements to count as the height ?
View 1 RepliesWhen I load an external SWF into a container (be it a sprite or mc), and then retrieve the contentLoaderInfo for 'height' and 'width', and attempt to resize the either the SWF (loader content) OR the Sprite/MovieClip to a smaller size, using the loaderInfo to maintain aspect ratio, it resizes all the elements that are offstage as well.
[Code]...
My main swf is 960x600 and loads full screen. it is a projector or swf, local. I have the code on frame 1 to ensure full screen and show all:
stage.scaleMode = StageScaleMode.SHOW_ALL;
stage.displayState = StageDisplayState.FULL_SCREEN;
Then I load an external swf into a mc, and it goes full screen as expected. BUT the main swf that loaded that external one, at the time of load, suddenly gets scaled back down to its normal size: 960x600, on the top left corner of the Player Window (or the full screen), so somehow at 0,0. Whn I unload the external swf, I can put the code stage.scaleMode = StageScaleMode.SHOW_ALL; to get it back to where it was. But unfortunately I have some buttons from the Main swf that are supposed to be on top of the loaded one, and should stay where they are. But now they all move because of this scaling down.
the mc that is being used as a container for the loaded external swf is an empty mc located at 0,0. The external swf has the same size as the main one: 960x600
I searched and tried things but could not get it to stay in show-all mode when loading this external swf...
im loading photos of different aspect ratios with a loader onto a child holder frame_mc. I wanted to know what AS3 commands do i need to work on to get the frame_mc to resize to the new childs dimensions and centerize itself on the main stage? (as in event listeners, functions, vars etc)
View 3 RepliesI am relatively new to Flash CS3 and i have been learning Action-script 3 over the past week. I have come quite a long way and i have made a site in flash but i just have a question.I have been using an image as my background and i am happy with the way flash automatically scales all the objects in my file but the background image does not scale. Is there a way to do this? I have found out things online which show me how to add auto-resizing to the background but this knocks off the flash auto scaling/resizing for everything else.
View 4 RepliesAs you can see, I have an external swf file that loads into a container clip. When a user clicks on the next project button, or any other category, another image gallery starts loading. My question is, is there anyway to load the other galleries in the background while users browse through the loaded ones?
View 4 Replies[URL]I have an external swf file that loads into a container clip. When a user clicks on the next project button, or any other category, another image gallery starts loading. My question is, is there anyway to load the other galleries in the background while users browse through the loaded ones? Is having an off-stage invisible movieclip with an loadMovie function the best way to do this, or is there a better method?
View 3 RepliesJust to get some professional opinions, is it possible to load in an external SWF and set that SWF's background to transparent?
This question has nothing to do with embedding the SWF in an HTML page. I already know that setting the WMODE to transparent will create a SWF with a transparent background in a browser.
I have a gallery with a Next/Previous button and individual frames that contain a "loadMovie" function. When the user clicks next or previous the movie jumps to a new frame and loads an external swf/w a preloader into a container. The way I have it , the movie has to load each swf one at a time. Is there a way to have the movie loading the other swfs in the background, so the user doesnt have to ait for each swf to load?
View 1 RepliesI was wondering if anyone could point me in the right direction.I have images loading into loaders, and empty movieclips, on demand..I would like to be able to load images that havn't been cached yet, but still have the images that the user navigates to to take loading precedence if need be. ie...Speed up loading time by haveing images load as a background process.
View 1 RepliesI have to swf files.
One is menu.swf and the other is long.swf
Menu.swf has basically a menu and loads long.swf in to it. Long.swf is a file with a very long background, only part of it is displayed at a time.
My question is quite basic- how do I get the menu.swf to load long.swf and go directly to a specific part of the background.
I can get long.swf to go directly where I need it with its internal navigation by using tweenlight, but not from menu.swf.
dim background content after loading an external swf into main swf. I was told that a dark movie clip placed over the whole site but under the external swf with alpha set to 50% would work. I need the background content to dim when the external swf is loaded and then go back to normal when exiting that page link. How can this be done thru xml or actionscript?My website is an xml flash template that loads the text and pictures for the site Thru xml file. Anyone have sample code? I am newbie to actionscript.
View 7 RepliesI've created a couple of flash animations, fairly simple, but the whole relies on loading external swf files and then unloaing them.
�
The base file works fine, loads the externals and unloads them (although I need to preven the user from hitting the unload button when there is nothing to unload) and will then load another just fine, IF I run it directly from my file system.
�
I want it to be on a web page, but when you click the button to load the external files, nothing happens.� Safari tells me it cannot find the file, and I'm using the exact same directory to test.
�
So, works fine when testing with flash (CS4) and running directly from the directory in finder, but from a web page, it cannot find the file.
There are two external swfs loaded in one main flash file - the rolling ball, which is a default external swf, and the circles swf, which loads after the gray button is clicked. I would like the circles swf to load into the blank movie clip I have set up.� I� would like the external swf contained within the blank movie clip to� be full browser flash and scaleable with any change in browser size. To do this, I set up some actionscript to make the blankmc full browser and scaleable (i've done this on a regular movie clip slide show from within a flash file, rather than being an externally loaded swf, and it worked.)�� with the hope that the blank movie clip and its contents, which would be the external circles swf file, would resize and rescale appropariately if the browser window were changed.
�
Currently, when the gray bar is clicked, the circles swf comes in not as full browser.� Once the window is resized, the animation relocates itself to the lower right corner,� with the top corner of the external swf situating itself on the center� of the blank mc. I know this is a registration issue, but before resize the animation is where i want it.� Also, while the scale of the circles animation does change with the browser window size, it does so i a wacky way.
Take a look at this swf file at [URL].. Click on the gray bar, then once the circles animation begins, try resizing the browser window. There are two external swfs loaded in one main flash file - the rolling ball, which is a default external swf, and the circles swf, which loads after the gray button is clicked.I would like the circles swf to load into the blank movie clip I have set up.� I� would like the external swf contained within the blank movie clip to� be full browser flash and scaleable with any change in browser size. To do this, I set up some actionscript to make the blankmc full browser and scaleable (i've done this on a regular movie clip slide show from within a flash file, rather than being an externally loaded swf, and it worked.)�� with the hope that the blank movie clip and its contents, which would be the external circles swf file, would resize and rescale appropariately if the browser window were changed.
�
Currently, when the gray bar is clicked, the circles swf comes in not as full browser.� Once the window is resized, the animation relocates itself to the lower right corner,� with the top corner of the external swf situating itself on the center� of the blank mc. I know this is a registration issue, but before resize the animation is where i want it.� Also, while the scale of the circles animation does change with the browser window size, it does so i a wacky way.
I have a stage of 600x400 and in the publish settings I chose this same width and height (with pixels dimension, and scale: No Scale).And when I load the swf in a browser:
[URL]
It resizes the swf stage size.(I know this because I have a value which is positioned according to the stage width/height, and also because if I choose an opaque windowless I can see that it is bigger than I want it to be)Am I loading the .swf wrong?
I'm testing this idea of mine, but so far I've not been awarded succes.so, here's what's my idea about:I want to load a big background-picture into my Flash, and then I want it to be resized so it fits the screen-resolution that the user has on his/her browserit loads perfectly, and - from what I can see - keeps it's dimensions.but it does not resize to the size of the browser as it should....if you go to the link, and then manually resize the browser-window, you'll get the resizing of the background-picture going on, though.here's how it's all build:I have a test100.fla with a test100.as Document Class
test100.as:
Code: Select allpackage {�
import CustomBackgroundTest;
[code]....
I have a code for a page I am using and I would like to add a background and have it resize with the screen like the rest of the page. I have created a movie button named "pic" with the image in it but I don't know how to write the code and place it in the existing AS3 code file.how to place the code like i was in 3rd grade, that would be great. Here is the existing code.
package com.modules
{
import flash.display.*;
[code]....
I saw this site in another post and I've noticed this becomming the trend in photo galleries. [URL]When you drill down and open up a photo, the photo resizes with the browser while the rest of the movie elements expand without resizing. I'd love to know how this is done.
On a side note, it used to be impossible to resize a photo cleanly in Flash. Is something being done here or is it just improvements in Flash players?
I have a code for a page I am using and I would like to add a background and have it resize with the screen like the rest of the page. I have created a movie button named "pic" with the image in it but I don't know how to write the code and place it in the existing AS3 code file. I am brand new to this so if someone could tell me how to place the code like i was in 3rd grade, that would be great. Here is the existing code.
package com.modules
{
import flash.display.*;
[code]....
I want to create a website with a background that will auto-resize according to the stage size using AS3.But what i need to know before I do it is: What is the right resolution for the background picture?I want people with resolution starting from 1024x768 to view the website correctly and I also want people with 24'' monitors to view the background with good quality so I guess the image needs a high resolution. I started with 1936x1288 but when I resize the stage to fullscreen the bottom of the image gets cut off.
View 6 RepliesBasically I am working on a project which I have coded using HTML, HTML5, CSS and JavaScript. The issue I have is that I want a flash object/animation to show on the first page. Now despite resizing the file within the HTML it seems that within Firefox and IE it sets a default size and doesn't fit the screen.
When tested on Safari it seemed to work fine but just doesn't show as intended on Firefox and IE.
Below you can a find a link to get a better understanding of what I mean.
[URL]
i need to dinamically resize some swf in flash 8 but the only code i found on internet for resize swf's stage is for an old version (6 or maybe 7)i tried to use in flash 8 but i guess for security issues it just don't work
View 2 Repliesi have 2 movieclip in my flash file. 1st one is the background which i want to resize full accoding to the browser.
2nd one i don't to resize it should be in the same size accept the 1st movieclip.
i tried 100% window from the publish setting but it resizing both the movieclip.
i've a problem with the resizing to the browser of a swf. I preload this swf that have in one layer a movieclip that contains the main animation and in the above layer this actionscript:
[Code]...
Does the resizing actionscript is loaded when the preload load the swf "main.swf"? Because it seems no. In fact when the preload end its process and load main.swf the code in the first layer (the above code i've posted here) for resizing it and adapting to the browser page seems that it's not working. seems that it jump that code.
I've some problems with my flash website I've a photo as a background and I need to stretch that image on browser window without scale. I need that the image was expanded on all window of a browser and proportionally changed together with change of a window of the browser.I've been set 100%x100% in Publish settings and padding=0,margin 0 in body style in dreamweaver. I have been using
stage.addEventListener(Event.RESIZE, resizeListener);
function resizeListener (e:Event):void {
trace("stageWidth: " + stage.stageWidth + " stageHeight: " + stage.stageHeight);
[code].....
I'm about 99% done with a site I'm working on and the client just hit me with a low blow.The designs that I got from their designer were a certain dimension, so I built the site with the assets based on those dimensions and now that I'm nearing the end of the project, the client seen the site on their 13 inch macbook and freaked out "everything looks too big!" is what they said. Is there a way to resize assets based on browser size without having to go in and do too much modifying? I tried looking this up, but I got a bunch of Event.RESIZE responses which I don't think I'm looking for that.
View 3 RepliesI am building a flash site for my own photography business and the site is designed in such a way that it will scale from 1200x720 down, but never up. So on the biggest monitor, the biggest this should get is 1200x720.
I am having an issue where after you resize the page down smaller than the biggest, i the main container of the content "mainStage" is too small, and even after maximizing the window, it is still stuck on a small size.
-- if you refresh the page with the window at ANY size, it works PERFECTLY.
-- if you resize the browser without refreshing the page, you will reproduce my issue.
I have uploaded the page here to be seen. [URL]
-- Here is the source for this. [URL]
i really want to get this resizing dynamically to work before i work on the rest of the page.