ActionScript 3.0 :: Loading Multiple External SWF Files In Sequence?
Dec 3, 2008
I have a fla file that I've created to load 7 external swf files. I am able to create the code to load one swf file without any trouble but I can't figure out the code to get it load swf #2 when #1 is done, and so on. My code for one is below:
[Code]...
I'm fairly new to AS3 but this seems like a pretty basic thing to do.
View 8 Replies
Similar Posts:
Sep 4, 2010
I am working on a photo gallery with music and everything works good except I can not seem to load multiple music files one right after another. This is the code I have that works with one music file.
View 1 Replies
Nov 15, 2007
I have been working on this script that currently loads 2 external files into two separate areas inside my application. the 2nd file loaded is supposed to have several buttons that control the 1st movie clip. Like go to next frame, etc. My problem now is the 2nd file loaded, is not controlling the 1st anymore ( i had this all sitting in one file before).
So the action script to load the files is;
Code:
this.myBtn.onRelease = function() {
//load render 1 into viewer
this._parent.viewer.createEmptyMovieClip("clipHold", this.getNextHighestDepth());
[Code]....
View 1 Replies
Apr 18, 2010
I have created a number of flash files, and now want to combine them all into one single movie file. For example, the files run like this: section1.swf - section2.swf - section3.swf - section4.swfI have created a 'host' file, to load the individual files, but I want to play these files in sequence. So that at the end of section1.swf, section2.swf will play and so on.... Can anybody guide me as to what is the most straightforward method of doing this? I have little or no knowledge of actionscript so the simpler the better for me
View 2 Replies
May 25, 2011
I'm doing a presentation where it loads different swf files in sequence. I already have a holder with width = 819, height = 614. Right now, I'm loading 1024x768 swf files in it.
This is the code in use:
loadMovie("movie1.swf", holder);
holder._width = 819;
holder._height = 614;
The swf file is loading in the correct position, but when I test play it, the first one [movie1.swf] loads and plays in it's original size [1024x768], then the following one [movie2.swf] loads and plays the way I want it [819x614]... Then when the whole movie loops again, now, the first one [movie1.swf] plays the way I want it to.
View 2 Replies
Jan 23, 2003
i have to load a sequence of external swf files inside a MC.I have no problems with that, but i want to, load the first, and after is fully loaded, make a timer that waits 30 seconds, and then loads the second external swf file.i dont have the original fla files of the external swf files.
View 1 Replies
Sep 8, 2011
I am using below code to load images from array, which works fine. My unsolved question how do I put all the images after it has been loaded to holderMc_animation (which in in root, with instance name holderMc_animation)...is sequence order?
image 1 goes to keframe1 of holderMc_animation
and image 2 to keyframe 2 of holderMc_animation and so on...
Actionscript Code: ......
Have uploaded FLA file
View 5 Replies
Aug 28, 2011
I am loading these 5 images into a sequence of boxes. Everything works fine except Images are not coming in sequence. They are coming in random order. for Eg.: Box1 contains 3.png, Box2 contains 1.png..so on..[code]
View 7 Replies
Feb 5, 2007
I have a 'base' MC on the root. On to which I am trying to load several external .swf sequentially. (sn1.swf, sn2.swf...) I see that there is a small lag or a quick flicker when one movie ends and another loads. Is there a way to solve this so the movies load seamlessly?
View 3 Replies
Feb 23, 2011
I spent almost a week trying to figure out how to unload a currently loaded swf using its button and loading a new swf... I have three files, a main.fla, file1.fla and file2.fla. In my main.fla, I have a code which loads the other two files. If i will click the "unload" button in the file1.swf, I would like the main.fla to unload the file1.swf and load the other file, file2.swf. Here is the code to load the file1.swf:
[Code]....
View 1 Replies
Apr 24, 2010
Lets say I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any limitation or setting preventing external swfs loading other content?
View 2 Replies
Dec 7, 2009
What is the best approach in AS3 when loading multiple XML files. I have 3 XML files I need to load. Should make separate XML loaders and functions for each XML file?
View 1 Replies
Jul 7, 2009
i'm making a simple portfolio site, and bringing in a series of jpeg files using a 'for' loop and the Loader class. once all the files are loaded in, i'd like to just be able to add, remove, tween, etc... the items from the stage as need-be by using instance names, such as movie clips or Sprites. but for some reason, i cannot seem to figure out how to have each image, as its loaded in, be separately accessable to me after the loop has completed.
View 10 Replies
Jan 28, 2009
I'm curently using:
Code:
var example:XML;
var exampleLoader:URLLoader = new URLLoader();
exampleLoader.addEventListener(Event.COMPLETE,XMLLoaded);
[Code]....
Do I have to declare a new Loader and a new function for every XML file I load? Is there a way to load multiple XML files easily ?
View 1 Replies
Sep 14, 2009
ActionScript file
Code:
package classes{
import flash.events.Event;
import flash.net.URLLoader;
[Code]....
In my output box doesn't appear anything.
View 1 Replies
Apr 8, 2005
In a website i have 10 buttons and each of them loads an image. the image only loads into a empty movie clip as soon as i press the button.What i want to try is to start load the images as soon as i enter that page, and I want the buttons to show, only when their image is loaded. Kinda like a progressive thing.What i have to do?? send each image to a diffrent level when loading?
View 3 Replies
Apr 24, 2010
I have subgallery.swf file that loads jpeg images. And I have gallery.swf file that loads subgallery.swf.The jpeg images and both swf files are in the same folder.When I test gallery.swf it loads subgallery.swf but subgallery.swf doesn't load images. When testing subgallery.swf alone, it loads jpeg files.Is there any security limitation or setting preventing external swfs loading other content?
View 3 Replies
Apr 7, 2010
im trying to load 7 xml files into a question array, im unsure as to whether i need 7 arrays or if i can load it into one single array. each xml file has a set of questions for a quiz i am making i have managed to load the first set of questions but i dont really know how to proceed
View 2 Replies
Jul 28, 2009
I am trying to put a few songs on a website, not as an .mp3 player, I just want to be able to assign individual buttons to control them.ow, and it works great. I would like to now how to add more and assign them to their own buttons seperate from the other songs.This is the code I have for one song
var url:String = "";var urlRequest:URLRequest = new URLRequest(url);var sound:Sound = new Sound();sound.load(urlRequest);var sc:SoundChannelvar startTime:uint=0;
playBtn.addEventListener(MouseEvent.CLICK,playF);stopBtn.addEventListener(MouseEvent.CLICK,s
[code]......
View 5 Replies
Mar 15, 2010
How would i load multiple xml files in a LoadVars Object and return each values?
View 1 Replies
Nov 3, 2010
Im creating a really simple flash website and script to load multiple swf files into the main flash file. Im using cs4 with action script 2 but I have no idea on how to code the script to make it work properly. I have a navbar and each time you click on a tab a want it to load a seperate external file, unfortunately now it just keeps playing the same one over and over again. How do you make one close when a new tab gets clicked.
View 1 Replies
Apr 22, 2010
So I've got this XML driven MP3 player, I need to unload the current XML playlist and load in a new one based on a button on the stage.
Here's the XML loading code, the rest is in the FLA file included.
Code: Select all//Variables
var musicReq: URLRequest;
var musicBank:URLRequest = new URLRequest();
var slc:SoundLoaderContext = new SoundLoaderContext (3000);
var music:Sound = new Sound(null, slc);
[Code] .....
View 10 Replies
Nov 2, 2004
I want to load data into a flash movie from two or more different XML files.I loaded first file with xml.load("myxml.xml")when i added other xml as same directive as above, it didn't worked.
View 1 Replies
Jan 14, 2009
this is how im trying to preload external swf files:
[code]...
i am loading first four swf files from swf directory (page1.swf, page2.swf, page3.swf, page4.swf) - However, I WOULD LIKE THEM TO BE INVISIBLE WHEN THEY ARE PRELOADED TO THE STAGE.. how should i do that.. "fileLoad._visible = false;" does not work
View 2 Replies
Aug 17, 2011
I'm making a site that my clients will be able to log into, in order to check their status with my company.
Basically, I have the following dynamic text fields (instance names);
ActionScript Code:
/*
mayPay
junePay
julyPay
[Code]....
I will have .txt files uploaded to my server which I will be able to edit on the fly. I am just having trouble setting it up.
I can find a way where I am able to load one external text file into a dynamic text field, but not multiple..
View 1 Replies
Dec 11, 2005
I have designed this site with few external swf. I was wondering how can I preload all the externals swf's file in the same preloader of my first frame and scene. I have this code :
onClipEvent (load)
{
total = _root.getBytesTotal();
[code].....
View 14 Replies
Apr 19, 2007
I'm working in Flash MX
I made a site completly in flash.
But to lower file size I made the each section a different swf file
when you click a link you will have to wait for that section to load, it would be good if peoples can see the loading progress while they r waiting.
And i hav added a preloader in each of the external swf file.. and then i realise that if i wanna change or modify the preloader, i will have to change all the preloader too.. this is really kicking axx..
is there a way where on the main page there is only 1 preloader needed to show all the external swf files loading progress? i am using an empty mc as container to load thoose external swf files..
View 6 Replies
Sep 28, 2007
I am trying to find a way that I can print a range of jpgs that aren't currently loaded in my movie.
I have a list of thumbnails of photos (with correlating larger version residing externally)each with a number. I want the user to be able to specify a range they would like to print. I think I've gotten close by trying to create a new cast member and load the jpg into it for each one in the range. However my movie keeps hanging and not responding why I try that method.
View 1 Replies
Jun 30, 2008
I have a file (main.fla) which loads external movieclips on it,using an empty movieclip as loader (loader_mc).Now,I want to create a navigation,with two buttons (previous / next) which will allow me to navigate through the external movieclips.So,I have created these two buttons.For the "next" button I am using this code,to load the first external swf file (example1.swf):
Code:
on (release) {
if(this._parent.loader == Number(this._parent.loader_mc)){
[code]....
View 4 Replies
Jan 14, 2009
how im trying to preload external swf files:[code]i am loading first four swf files from swf directory (page1.swf, page2.swf, page3.swf, page4.swf) - However, I WOULD LIKE THEM TO BE INVISIBLE WHEN THEY ARE PRELOADED TO THE STAGE.. how should i do that.. "fileLoad._visible = false;" does not work-
View 2 Replies