I have an animation (movieclipX) on frame 2 of main timeline. At the end of movieclipX I'd like the main timeline to move to the next frame, frame 3. How can I do this??Sorry if this is an easy question, I'm in the process of learning.
View 8 RepliesOn the main timeline I have a movie clip called clock_mc and playBtn playBtn is placed in the center of clock_mc When you press playBtn clock_mc starts playing
playBtn.addEventListener(MouseEvent.CLICK, playClock);
function playClock(event:MouseEvent):void
{
if (event.target == playBtn)
[Code].....
I've tryed to placed the replayBtn on the stage on the main timeline and I've set it up to replayBtn.visible = false; And then I add replayBtn.visible = true; to last AS frame of clock_mc but it wont work Even when I put the button physically to the last frame of clock_mc it will not work either.
I am attempting to have the main timeline move from a stopped position over a movie clip to frame 1, where my start menu is.The code I'm using does move the timeline but in doing so it somehow breaks the 4 buttons I have in frame 1.
My code in the movie clip:
stop()
function replayMovie(event:MouseEvent):void
[code].....
I have a movieclip inside the OVER on a button, right now I have an animation that causes the button's brightness increases from 0 to 10 over 24 frames and then come stops because of a stop (). I now intend to add an animation after stop () which gets the button's brightness goes back to 0 again when you no longer hold the mouse over the button. I would therefore like to make some kind of mouseOut event that allows Movieclip go to the next frame. I have tried to insert a target path but it seems that it can't reach the movie clip inside the button.
View 1 RepliesHow to target a label within a movie clip on the main timeline, from a button within another movieclip on the maintimeline.
View 0 RepliesI make a website. First I have a frame with a movieclip, where my entire page is within.Inside of that is where all of my pages is in different frames, and in each of these frames there are other movieclips with content. My example:Top level /Entire site/My pages, in different frames /Movies/Pictures/About/Etc./Content (inside the "Movies") /Info about movies/Movie one/Movie two/Etc./My problem is as easy as this: I will link from the "My pages" level, to the first frame in "Content" (info about movies)If i just link to the, "Movies" frame, I can't get from "Movie One" to Info about movies by pressing the button, wich lies on the "My pages" Level.
View 4 RepliesI'm having a bit of a hard time with calling a function in the main timeline through a button in a movieclip. The mc is in the main timeline and in it I added a button with this.removeMovieClip(); and so far it works, but when I try to call a function from the main timeline it just doesn't seem to work.
View 13 RepliesI'm converting an old AS2 file into AS3 (and trying to learn AS3 at the same time).A movie clip contains a number of different animated sequences and buttons within the application trigger these different sequences.The buttons are functional only when an animation has completed playing.
In AS2, I achieved this with a var called _root.animating which was initially set to "false" and switched to true when the animation played and switched back to false at the end of the anim sequence. The buttons checked this var when clicked. Here is some of the AS2.[code]...
elow sir I am new here in actionscript and i'm using actionScript 3.0 I need to know what correct code to navigate this. First I have a movieClip from stage in main timeline and i use it as an container for my sprite an instance name of "container_mc" and when that sprite plays after it, it will stop and it will appear a button, I need that button to remove this sprite from the main timeline.
View 1 RepliesHiding Button on Main Timeline from inside separate Movieclip
View 1 RepliesI've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
navBack_mc.book_btn.onRelease = function() {
_root.gotoAndStop("book1");
}
I put the code above on the main timeline. It doesn't seem to work. Basically, I could put just an on(release) handler on the buttons, but I wanted to try to keeping all the AS in one place if I can.
I've created a movieclip with buttons inside that I want to use to navigate to different scenes on the main timeline. I have created a function() that loads the button movieclip into the main timeline, but if I try to write a function() to activate the button and move the main timeline to a different scene/frame label it doesn't work. I have tried various things:
navBack_mc.book_btn.onRelease = function() {
_root.gotoAndStop("book1");
}
[code]......
I created "symbol1" movie clip. And I have dynamic text "myscore" on the main stage.
I have this code inside of "symbol1".
mybutton.addEventListener(MouseEvent.CLICK, b1);
function b1(event:MouseEvent):void {
myscore.text = "30";
}
And it gives me this error. (1120: Access of undefined property myscore.)
It works only when text and actionscript inside of the same symbol. I tried like this root.myscore.text = "30"; but it still doesn't work.
ive made a simple game for a uni project, when you get game over a movieclip comes up and inside the movie clip there is a button to restart the game. how to i code the button inside the movieclip to gotoAndPlay to frame 1 on the main timeline?
[Code]...
On the main stage I have a button that I have made invisible once the file is loaded. Inside a movieclip I have on frame 15 the following actionscript 3 code
button_mc.visible = true;
I want the button to become visible at the end of this movieclip. I am not using an external as3 file, I am putting the as3 code in its own layer on the first frame.
I know it has something to do with the path to the button, but I cannot figure it out. If there is anyone who can point me in the right direction for referencing instances by instance name that reside on the main satge from inside a movieclip
I have a movieclip and within it is a bit of actionscript and a couple of different movieclips to make it function like the button on a ball point pen (you click it and it stays clicked until you click it again).
var booleanClick:Boolean = false;
var colorTransform:ColorTransform = optBox.transform.colorTransform;
optHitState.addEventListener(MouseEvent.CLICK, onClickHandler);
function onClickHandler(myEvent:MouseEvent){
[Code].....
I don't want to get deeper into this monster of a project without making sure this is working first. Is my boolean working and just my trace statements aren't worded right or is my method to change the boolean wrong?
I have a movieclip and within it is a bit of actionscript and a couple of different movieclips to make it function like the button on a ball point pen (you click it and it stays clicked until you click it again).[code]...
I don't want to get deeper into this monster of a project without making sure this is working first. Is my boolean working and just my trace statements aren't worded right or is my method to change the boolean wrong?
I create a movieclip button, and I want to change main timeline from it. what should I do ?
Is it useful to use MovieClip(root).gotoAndPlay(Is there any other way to change main timeline?
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesOn the main time line I've got movie clip called Z and also n the main timeline I've got another movie clip called B. Inside B I've got a movie clip called C. My problem is - the actionscript written in C makes few objects in the main timeline function (changing colors, displaying notes, input text linked with dynamic text, etc...). I need to move all those objects in to ONE MC in the main timeline (changing colors, displaying notes, input text linked with dynamic text, etc...). But when I move it in to a single MC it wont function! simply the actionscripts won't work!! What should I do to make all those objects in to one mc and still make the actionscript written in C work? p.s. - I've used the _root. command in C.
View 2 RepliesI am so frustrated now - I'm trying to clean up my code, but I just don't understand this issue.
I understand that on(release)[code]...
- But there are two things I just don't manage to convert;
1) How do I move the following from the btn_volumeSlider to the main-timeline?[code]...
i made a main(parent) page that loads an swf which has a button(a1) which on click i need it to move the timeline of the parent
i wrote this code to the external swf and tryed many commands such as Object(root).gotoAndStop(1);
a1.buttonMode = true;
a1.addEventListener (MouseEvent.MOUSE_UP,a1a);
function a1a(event:MouseEvent):void {
}
I simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesNot sure if I'm in the right place, I apologize in advance if so. I'm somewhat proficient with html, but fairly new to flash, using cs4pro, as3. Here's my dilemma. Converting an existing html/css site to flash. Flash is main site now but a few html pages are still linked, a buy page and a form page, a few others. I can get the all the external html pages to link to a frame in the flash movie, and I can get the flash to link with all external urls.
My problem comes when I move to a frame outside the main timeline. The movie is lets say 393 frames. All symbols/content are on seperate layers, and so is the action. Once the full movie ends, I have several frames past that where I have basically created frames for additional "pages" and created anchors for those frames, new layes for content, new layers for anchor (labeled) and new layers for a stop(); on each frame, I extended the pertinant graphic frames out to 410 from the original movie.
Now when the movies runs the buttons appear at about frame 115, so in the action layer I coded a keyframe and then added frames of it out to frame 410 or so: I have attached the .fla Now I'm lost here. When you navigate the site, from home lets say to an external link (button) like members, the html member page opens, and if you click home button, back to flash frame, and all works, all buttons, on the home frame 393. But if you go to any of the external htmls, and then go back to any other frame like frame 401 the about page, and all the rest 402 403, etc, the page appears properly, but then none of the links function. the site URL is [URL]there is a flash intro too, swf in question is actually at[URL]
I have this code below on this button that is inside of a movieclip. I just want this button to do is move the main timeline to a specific frame thats all.
[Code]...
I didnt put i a object name before the addeventlistener because I'm not sure what to put because if I put "this" the other buttons will bt controlled by this code and if i put "parent" only that button will work.
I am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
I`m a AS2 user, having a few problems getting adjusted to AS 3. What I want to do: In my stage I have 3 movieclips:
- Intro (frame 1)
- Main (2)
- End (3)
In the movieclip Intro i show some pictures etc, when it comes to the end, i want to go to the 2nd frame on the MAIN timeline. This used to be _root.gotoAndPlay("main"); using the hierarchy allways starting from _root or _level0. or _parent... I have tried searching but am not sure how to lookup this problem. I would be really happy if someone could post me a link how to address movieclips through other movieclips or starting from the root in AS3 and for the right code to use the function gotoAndPlay to go 1 frame further in the main timeline.
I have a frame label on the main timeline called "History" I have a movieclip on the stage. Inside that movie clip I have a button.
I want to refer back to History from the button within the clip. Tried everything.
I've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 RepliesInside of movieclip on keyframe i want a script that tells to swap depths between 2 mc's that are on main timeline. When i use setChildIndex inside of mc flash hits me with Error #2025.
View 9 Replies