ActionScript 3.0 :: NavigateToUrl Not Switching To New Tab
Feb 12, 2009
I am using the following line of code in my Flash movie: navigateToURL(request,"_blank");However, when I am using Internet Explorer 7 (with tabbed browsing enabled), and this code is called to open a link, the link is opened in a new tab, but IE7 does not switch you to view that tab as you would expect!When I open a link in a normal web page in IE7 (and the link opens in a new tab because _blank was specified in the HTML code for that link), IE7 will switch you to that new tab to see the web page you just opened, so why does it not happen when using Flash?I know that within the settings for IE7, there is a setting that you can tick that says, Always switch to new tabs when they are created, and this solves the problem. However, many web site visitors will not have this ticked.How can I make sure that when a user opens a link in a new tab from my Flash movie, IE7 switches to that tab?I am using ActionScript 3.0 and Flash CS4.
View 1 Replies
Similar Posts:
Jul 31, 2009
i have an xml file and i have created a gallery that loads thumbs at the start.what i want is that when user click on one of the thumb then it should open the big picture in another browser. i actually use it for swf files. swf files will be loaded in other window. my code is here
Code:
var xmlLoader:URLLoader = new URLLoader();
var imageLoader:Loader;
var xmlList:XMLList;
[code]....
View 0 Replies
May 1, 2009
PHP Code:
var req:URLRequest = new URLRequest ("http://localhost/SE/processimage.php");
var vars:URLVariables = new URLVariables ();
vars.awd = "awd";
[code]...
When I load that url the variable is sent using the GET method instead. It appears in the url in the browser and the browser shows an error first then "awd", meaning it worked for $_GET. I tried both req.methods and tried adding "_self" and "_blank" and also on different browsers. It still uses GET.
View 2 Replies
Feb 4, 2010
I'm having problems with creating a for loop to work with my CLICK state with navigateToURL.Can someone please show me the ways of my errors. I'm sure it is simple. Been out of the game for a while and coming in new to AS3. The roll states work fine.[code]
View 8 Replies
Jan 2, 2011
currently i have the main scene and within this scene i have a button with the value bg_src Also in the scene is a movieclip containing several frames, each frame with a different image and stop();, a different button simply tells this movieclip to go to the next frame, the last frame in that movieclip returns it to the first frame, so it will continuously loop through the images when the button is clicked, one image at a time.
Problem i am having is that i want the button with the value bg_src to link to the original source of the background images when it is clicked, whilst remaining part of the main scene and not within the movieclip.
lets assume image1 was [URL] and image2 was [URL] clicking the background change button would switch the background image to the second image, and the background source button would then, instead of opening a new page to[URL] when clicked, would then open a page to [URL]instead.
The code i have thus far is as follows :
Code:
bg_src.addEventListener(MouseEvent.CLICK, onBgsrc, false, 0, true);
var buttontext:TextFormat = new TextFormat();
buttontext.font = "Verdana";
buttontext.color = 0x424647;
[code]....
View 2 Replies
Feb 23, 2011
So I googled this problem and found like 3 threads with the exact same problem and what fixed their problem didn't fix mine, plus those threads are pretty dated. So I thought I'd get a more up to date answer.
[Code]...
When I load that url the variable is sent using the GET method instead. It appears in the url in the browser and the browser shows an error first then "awd", meaning it worked for $_GET. I tried both req.methods and tried adding "_self" and "_blank" and also on different browsers. It still uses GET.
View 4 Replies
Feb 14, 2009
I'm having problems with my animation getting cut of by my navigateToURL code. What is supposed to happen is,If you click on "buttonBtn" it triggers a animation. At the end of the animation it is supposed to stop and bring up a url. I've used gotoAndPlay ("frm") and navigateToUrl. Each time I test it in the browser the animation will begin, but the url comes up before the animation is finished. How do I allow the animation to play all the way through and then retrieve the url?
stop();
//SimpleButton ButtonBtn;
function handleClick( pEvent:MouseEvent):void
{
[code]....
View 9 Replies
Mar 8, 2009
i've created a flash animation with as3. at the end of the timeline i've got a stop(); action on the last frame which is working just fine. on the following frame i have the navigatetourl action navigateToURL(new URLRequest [URL]} for some reason which i've been incapable of figuring out it will not automatically flip to the page i have written in my action when the animation has finished playing.
View 8 Replies
Nov 2, 2008
This is the code I want to use to direct a user to a different web page-
function linkToBiblioteca(event:MouseEvent) {
var request = new URLRequest('www.biblioteca.buap.mx');
navigateToURL(request,"_blank");
}
- but it trys to open inside of my directory. How can I avoid this?
View 3 Replies
Nov 23, 2008
I'm kinda new with Flash but I've managed to create a menu for a homepage. Now when I click on one of the menu links - the page opens up in a new window. But I don't want that at all. I want the page to open up in another frame called mainframe. I've tried a number of things already; changing from "mainframe" to "_mainframe" and back, trippelchecking that the frames name really is mainframe so there's no typo. I've also changed the name of the mainframe both in the htmlfile and the code but that didn't work either.
Here's my code:
var linkabout:URLRequest = new URLRequest("about.html");
//...// function aboutClick(event: MouseEvent):void {
if(subDown[1] == true) {
//true = submenyn Īr nere o ska upp
subAbout_mc.gotoAndPlay(15);
[Code] .....
View 8 Replies
Apr 2, 2010
On a game we just completed in Flash Builder 4, there are a couple of links like this:
var sponsorLink:String = http://www.plantersplace.com/;
navigateToURL(new URLRequest(sponsorLink), _blank);
IE 7 in some installations is treating this as a popup. Firefox 3.6, Chrome 5, Safari 4 all fine.
The game in question is at [URL]
Click "continue without logging in, then click "show hint". Click the hint. This should fire the above code and open a new window.
Several users in IE report this gives them a pop up alert. I am trying to find out why and what can be done about it. I have tried the solution I found at Zorked but people STILL say they are getting popup alerts.
View 1 Replies
Jun 30, 2010
I have a question: The following code, which works OK in Firefox and Safari, gets IE8 to throw a pop up block The simple code:
[Code]...
View 3 Replies
Sep 14, 2010
I had developed a whole series of tutorials using Flash CS4 (AS3). To load various modules I used the the following code:
Button_btn.addEventListener(MouseEvent.CLICK, btnClick);
function btnClick(event:MouseEvent):void
{[code]...
This works great with CS4 but when I stated using CS5 and exported my swf files, it stopped working. It seems that its trying to find the page over the internet and not the local directory anymore.
View 2 Replies
Jul 14, 2008
I'm fairly new to actionscript. I have created a flash banner ad that is now hosted on a site. Whenever somebody clicks the banner IE responds witha a "pop-up blocked"!
The code that handles this is:
ActionScript Code:
clicky.addEventListener(MouseEvent.CLICK, gotourl);
function gotourl(e:MouseEvent):void {
if (root.loaderInfo.parameters.clickTAG.substr(0,5)=="http:") {
navigateToURL(new URLRequest(root.loaderInfo.parameters.clickTAG),"_blank");
}}
Where "clicky" is a SimpleButton that covers the entire flash. clickTAG is passed as an argument as to where to navigate. If I allow pop-ups everything works as it should! Howvere disabling pop-ups shouldnt be needed - and i see that other flash ads on the site works without and pop-up warning.
View 9 Replies
Feb 15, 2009
Maybe someone in this forum can give me some help. Here is what I'm trying to do... I have page that when you click any of the buttons, it triggers the same animation. Now, depending on which button you click, it will take you to a different url. My problem is, with the code I have, the animation gets cut off before it's finished and goes straight to the url. I know I need some type of listener or something to watch for the end of the animation before going to the url. I can't seem to figure out what that code is or where it needs to go. Also, my animation is not in a movie clip. It's all in Scene 1. I've got the following script in the first frame of the actions layer. I'm only about three weeks into self-teaching AS3, so tell me like a third grader what is up.[code]
View 1 Replies
Sep 18, 2009
I want to call another web page from flash, passing one parameter to it. I'm using the following code:
ActionScript Code:
var request:URLRequest = new URLRequest();
request.url = "index.html";
request.method = URLRequestMethod.GET;
request.data = new URLVariables("section=games");
navigateToURL(request, "_self");
[Code]...
View 7 Replies
Sep 8, 2010
How do I make it so it opens the link in the same window as opposed to a new tab?[code]
View 2 Replies
Oct 26, 2010
create an AS3 menu with graphic buttons (animations already done) that get the URL link (navigatetoURL function) from an external XML file.
Could you write for me the necessary AS3 code and the structure for the XML?
Situation:
- Animated button (already done)
- Code to pass URL link to the button from an XML file (I don't know)
View 0 Replies
May 19, 2009
I have a series of buttons that I want to act as links. In firefox and safari, the links work fine, but in IE, it reacts as if I hit the reload button..This is the code I am using:
Code:
private function launchCourse(event:MouseEvent):void
{
[code].....
View 1 Replies
Nov 17, 2009
I have a problem in Flash CS3 using AS3 which is driving me nuts. What I am doing seems easy enough and it works fine on Macintosh under Firefox and Safari, but I can't get it to work on Windows under Firefox 2 or IE 7.
I have a button on the stage with an animation that leads up to it's reveal, hence the stop() function in the AS. The button is labelled "Web_btn" and the purpose is to open a web site when the user clicks on the button. Ideally I would like the button to open in a new window but I understand that that is a problem due to web blockers so I have chosen to use "_self" for now. On the Mac (OSX 10.5.8 and Flash 10) everything works as expected but on Windows (XP SP3 and Flash 10) when I click on the button nothing happens. Here is the code I am using:
Code:
// Initialize
function init()
{
[Code].....
View 1 Replies
Apr 7, 2010
what I'm using in a Mac projector that's on a CD-ROM:
Code:
protected function get urlRequest():URLRequest
{
return new URLRequest("http://www.kirupa.com");
[code]...
Basically, all I want is a thing where:a user puts in a CD-ROMopens the projectorclicks a button and the user's browser goes to the specified web pageThis works fine on a PC projector. On a Mac, it never opens the page. It seems like the Mac puts the focus on the default browser program, but never goes to the URL.
View 6 Replies
Nov 14, 2010
I have a page with 2 div, simply like this
<div id="menu">
//here the code for a flash menu
</div>
<div id="content">
//here I want to show a flash movie accordingly to the button clicked on the menu
</div>
I want to show the pages inside the div "content" without reload the whole page, can I do this with navigateToURL()? Can it interact with a js function or an Ajax call?
View 1 Replies
Dec 14, 2010
I'm at my absolute wit's end. I'm an advanced Photoshop and After Effects user with quite a bit of knowledge using HTML and CSS. Today is my first day of Flash.
One would think that redirecting to a different page at a certain frame would be simple. I've been sitting here for 5 hours sifting through tutorials and forums and still have yet to arrive at the answer.
Here's what I have:
I clicked on the last keyframe and in the actions panel entered:
flash.net.navigateToURL(URLRequest("http://www.mywebsite.com/index.html", "_self"));
I have tried many (many) other iterations. how it can be done using step by step instructions. Most importantly I need a complete example of the actual code to be used.
Why is it so very very difficult to do this? I love how scripts function in After Effects. I love other Adobe software. Why is Flash so cumbersome?
View 2 Replies
Apr 25, 2011
Assuming that I want to open some html file placed on server with the use of navigateToURL: navigateToURL(new URLRequest("MyDirectory_1/MyDirectory_2/index.html"), "_blank"); Html opened in this way makes browser treat it as a pop-up window. As a result the html is blocked by browser.
View 2 Replies
Aug 19, 2011
I'm new in ActionScript 3. I have a movie and inside a button. I want this button to send to an url. And it don't works. Why?
buttonBt.addEventListener(MouseEvent.CLICK, buttonGo);
function buttonGo(event:MouseEvent):void
{
[code]....
View 6 Replies
Oct 28, 2010
I am simply trying to link a button on my site to another webpage (an online store). The site is currently live at Higdon Florist (won't let me put the dot com address due to forum rules) The last 2 menu options (View Bouquets and Place Order) should link to (store dot higdon florist)
On PC, this works just fine every time.
However, I have reports that Mac users have trouble. The action never fires on the first 4 or 5 tries. Then, suddenly, it begins to work (and continues to work thereafter).
My AS3:
import flash.net.URLRequest;
import flash.net.navigateToURL;
navigateToURL(new URLRequest("(store address)"), "_self");
[Code]....
View 4 Replies
Mar 14, 2010
I have a textField on my stage named 'adBuy', which when clicked I want to open up my browser with the defined in URL request. However when I click on the 'adBuy' textField on my SWF it opens Coda, the piece of software I'm using to write this small piece of code?[code]
View 1 Replies
Jan 10, 2012
Been pulling my hair out for hours today over this.I can't open another website from my already opened flash site.Here is the code:
GotoFB.addEventListener(MouseEvent.CLICK, gotoFB);
function gotoFB(event:MouseEvent):void
{
[code].....
View 1 Replies
May 29, 2009
My flex app has a call in it to navigateToURL(new URLRequest(_rURL),'_self');
But it takes about 3-5 or even more seconds before it will leave the current page.
If I omit the '_self' the new window opens immediately and the page loads immediate...but only when I set it to _self I get a few seconds of a delay before it loads...I have no idea why but it is annoying.. I am wondering if anyone might have any idea why this is happening or anything I can do?
View 1 Replies
Sep 5, 2007
Newb here. I have a button that links to an external website. HEre is the code I have.[code]...
When a user clicks on this button, the browser opens a new window. How do I make the browser open the new page in the same window? I'm sure it is simple; I just don't know the code. Also, is this the easiest way to create a link? It sure requires a good bit of writing.
View 8 Replies
