I am loading external child SWF's into a parent SWF. The embed params for the parent force wmode=opaque. Can I send the wmode to each child SFW and force it to something else regardless of the parents passed varibles? I'd like to play with GPU.
View 2 RepliesI have a customized drag event that works great for most things:
[Code]...
The issue is that when I use this code with wmode=transparent or wmode=opaque the MOUSE_LEAVE event is not detected when the MOUSE_UP event occurs off the stage. Is there a way to detect the MOUSE_LEAVE event when wmode is transparent or opaque? OR Is there a way to detect that the wmode is set to transparent or opaque so that a work-around may be implemented?
Basically I have 10 different movie clips, all hold in them a different image of a car. They have titles like blackcar, redcar, etc etc... How to show a blackcar when my black button is pressed?
I've tried
on (release) {
with ("blackcar") {
gotoAndPlay(1);
}
However the screen just flashes, even after a stop(); in the movieclip.
We have FMS 3 on a server I'll call "Streamer" We have a public webserver running IIS on a server I'll call "Web Server". We host our website on Web Server, and both Streamer and Web Server are behind our firewall.
I made a page on Web Server with a flash file that has a Player which goes to [url]...
When we navigate to www.domain.com/test.html (which has the embedded video) from inside the network, we get the video streamed to us. However, when we get a laptop with an aircard connection up (to simulate a request from the web), the user gets a blank flash file with no video whatsoever.
On Streamer, the log file shows the IP address of my PC (the PC that made the request from the video inside the network) so that makes sense. But it shows no other request being made (like when the laptop/aircard made the request from the web).
We used wire shark and sure enough it showed that from Web Server to Streamer, there was traffic when it packet captured the internal request. But there was no traffic when the public request was made.
I got 4 different pictures that I'd like to load randomly. The thing is that I don't want to load the picture from an external .swf file. I'd rather load them inside the same .swf document that I'm working on.
View 1 RepliesI'm using a package to play back .wav files in Flash. I can make wav's play back, however, what I cannot do is trigger their playback from a button. I suspect this is because I've misunderstood the this keyword. Below is an example.
You can see that when I call playBackTest() directly it works; when I call this object from a button it doesn't.
[Code]...
I have an AD which is basically a flash file inside an IFRAME. Unfortunately, I cannot control the wmode of the flash file.
Is there any way in which I can place the div on top of the flash?
UPDATE: How does Wibiya (wibiya.com) do it then?
I made a webapp where I need html content to popup on top of the swf objects I have. I ended up using the swfobject setting wmode: "transparent" which works fine in all browsers (Chrome, safari, IE) except firefox. In firefox I can't click the flash buttons, i tried to remove wmode=transparent and, of course, I can click any button I need (all browsers)... but this way I can't put my html content on top...
View 2 Repliesthis is a very specific problem; in my AS I have a createTextField (as part of a button) with a onRollOver effect on it. When I set the wmode to transparent the text either disappears or does not change color.
I need the wmode transparent thanks to a BG image in the html.
Anybody notice any issues when resizing windows that are embedded using the new "gpu" wmode? Like a noticeable lag and some scaling issues for about a second before it fixes itself? Its not a big problem but it is a lot less smooth than previously...Edit: I threw together a quick demo so you can have a look. I'm working on a site and it really has to use the new gpu wmode since it improves the performance quite significantly.
View 2 RepliesI am having a problem with a swf completly disappearing when using wmode at all. When wmode parameter is removed, the swf appears fine. The bug only occurs in FF on a PC (and only some of the time at that ). When theres only a limited amount of html code in the surrounding page (even with wmode ), the swf is visible, however at a certain point, ANY extra line of code causes it to break.
View 11 Repliescan someone please explain to me why i cant write Russian or France or Hebrew or any other utf char
when i am embadding my swf with opaque wmode??
is there a way to work around it? i have an HTML script with flash inside it and the text filed in the flash wont except any language other then English everything else is gibberish
I am new to AS3 (LAMP dev) i looked everywhere but no decent answer
i know this can be done by changing wmode to "transparent or opaque". But is there any way to show the div over the flash file using wmode "gpu" ..
View 1 RepliesHere's the thing, I'm making a flash game that uses some pixel techniques like copypixels, bitmapdata, etc.
Im planning to offer the game to FGL (Flash Game License) and I read that they doesn't not allow wmode, and many other portals do the same.
is my game taking advantage of wmode=gpu?.. how can I run my swf file and disable wmode for sure?, I just want to know if my game will run smothly without that wmode enabled.
How do I enforce Flash's wmode=window on Mac? This mode should make Flash reside on a layer higher than normal HTML elements and have better performance. It's working fine on Windows. On Mac, there's strange results. Chrome on Mac will allow HTML elements to cover only non-video elements in Flash. On the other hand, Firefox on Mac will let HTML elements cover anything in Flash. I don't want to allow any HTML elements to cover anything in Flash on Mac.
I'm using SWFObject to embed my Flash.
swfobject.embedSWF(
'flash/player_20110128.swf',
'flashPlayer',
[Code].....
How to display camera output while wmode is set to "direct"? To be more specific, I want to display camera locally without receiving stream from third party publisher.
EDIT: According to Adobe employee words there is bug, which not allow flash player to open security settings dialog, therefore camera is muted by default.
I searched and searched.Anyway, I have a swf sitting in a layer above html text. It's set to wmode transparent, and looks fine. it stays small until rolled over, then the buttons slid out as expected. However, when the swf buttons are still hiding, the html text in the area that the swf buttons will eventually occupy is not selectable when directly clicked.
View 10 RepliesI have a flash project that when published with the "Transparent Windowless" Window Mode setting under File, Publish Settings, under the HTML tab... the following Action Script 3 code causes the link to be blocked by the IE 7 and 8 pop-up blocker when I use the "_blank" target and embed the flash movie on my page in Dotnetnuke, however if I use the "_self" target the link opens fine in the same window. If I publish the Flash project using the "Window" Window Mode the link opens in a new window with the "_blank" target without a problem. I need the Transparent setting because I have a menu bar on my page the drops down over the Flash and the menu goes behind the Flash movie unless it is published using the transparent setting.
[Code]...
It is possible to enabled hardware optimization (wmode) from haxe?
View 1 RepliesI'm using a modal window on a client's site where we have no access to the content. The problem is that he has some flash on the page and the wmode for these is not set to transparent.
Is there a possibility to force their flash from our javascript to have this parameter added?
I need to embed some flash games but I'm disallowed to use wmode=transparent due to performance issues & sideFX. I need to place a DIV above the SWF, but without the wmode the SWF is always on top. Hiding the swf when div is visible resets the flash.
View 1 Repliesis there anyway to get the External.Interface.call functionality to work in Internet Explorer 7 when you have wmode set to transparent on the flash object in question?I've tried pretty much everything under the sun I can think of without any success after a long time browsing the net for fixes. I should point out that I get the calls to work in chrome and firefox with identical code and that it also seems to work in ie if I dont have wmode set to transparent.Essentially what I want to accomplish is to have a flash dropdown menu set to transparent so it can go down over html content without covering it and then using external.interface to resize the div the flash object is contained in when the mouse goes off or on the menu. In doing so making the html content accessable again when the mouse goes off the menu.
View 8 RepliesI have several objects that share a single mask. I can see all of them when wmode is set to window but i want the background image on the page to show through the flash and have designed the flash around that. However when I set the wmode to transparent some of the objects don't render at all even though others do and they share the same mask.
View 3 RepliesI was wondering if there is a way to get the External.Interface.call functionality to work in Internet Explorer 7 when you have wmode set to transparent on the flash object in question?I've tried pretty much everything under the sun I can think of without any success after a long time browsing the net for fixes. I should point out that I get the calls to work in chrome and firefox with identical code and that it also seems to work in ie if I dont have wmode set to transparent.Essentially what I want to accomplish is to have a flash dropdown menu set to transparent so it can go down over html content without covering it and then using external.interface to resize the div the flash object is contained in when the mouse goes off or on the menu. In doing so making the html content accessable again when the mouse goes off the menu.
View 2 RepliesThis has directly affected the last two AS3 projects I had, but I remember it happening with AS2 projects as well The following conditions apply:
- I have a fullscreen site with fluid design (stage resize listeners)
- On the stage there are movieclips with filters (glow, blur, whatever)
- In the browser, my movie is set to 'wmode = transparent'
When I resize my browser, any clips being repositioned that have filters on them just disappear. The only way to stop this from happening is to either a) kill the filters, or b) kill the transparency.
It doesn't matter if I apply the filters manually in the Properties panel or dynamically in AS. I've tried setting 'cache as bitmap', embedding the movieclip in another movieclip, all to no effect.
The only (fairly horrible) solution I've found is to add an ENTER_FRAME event listener to the clips that constantly check for their position until it's been found. That seems to work, but seems like a ridiculous workaround.
flash mask working - transparency (wmode) is not
[Code].....
im trying to fix the flash overlap using regular expressions. here is an example of markup im trying to convert to my needs
<object width="440" height="300" data=
"http://www.youtube.com/v/dMH0bHeiRNg&color1=0xb1b1b1&color2=0xd0d0d0&hl=en_US&feature=player_embedded&fs=1"
[code]......
I have a site with code like this:
[Code]...
I'd like to change all occurrences of wmode to opaque. Is this easily done via jquery? In the object definition, wmode is set to opaque but in the params it becomes transparent.
I'm building a Flash video player that uses the new StageVideo API. StageVideo requires window mode (wmode) to be set to "direct". Unfortunately, setting wmode to direct prevents the express install dialog from popping up if a user has a version of Flash Player older than 10.2.How can I set my wmode to direct to get StageVideo to work but also ensure the Express Installer pops up for users with older Flash Players?
View 2 RepliesWhen setting wmode to "opaque" (or transparent) my flash app becomes slow on Facebook. I can particularly notice it when moving the mouse around (even on a tiny area of the screen), if I don't move the mouse then the slowdown doesn't seem to happen. Maybe its because its sending all events to facebook too?
View 1 Replies