I need to have an error message inside a textbox when the xml is not loaded: My code is simples and is working:
[Code]...
How do I check if the loadXml worked and if not show an error message inside my statusvar textfield.
I keep getting the ArgumentError: "Error #1063: Argument count mismatch on LoadXML(). Expected 1, got 0." Usually this has to do with events or argumants passed in, but both seem fine to me. Does anyone have any ideas??
[Code]...
I"m a bit confused because FlexUnith 4's behavior. When I use fail() in try-catch body fail method is just ignored.
[Code]....
I suppose this one should fail as there is no way around it, but it succeeds and turns green. Whatam I doing wrong? When i put fail() before try-catch block it fails as it is suposed to. BTW using Flash builder 4.
Our Flash app has to load 50 or so files from a remote destination. Under normal network conditions, this is no problem. However some of our users started to report that the application "stopped working" during the loading phase. After some tests where we decreased the network quality to a point where 1 out of 3 packets were dropped in bursts, we managed to reproduce the error reports. Looking at firebug, it appears as if a few of the files (1 to 3 out of the 50) begin loading but never complete. No errors are raised in ActionScript and there is no apparent pattern in which files fail to complete.
Has anybody run into situation before and found a cause and or fix to deal with these situations ?It's not too hard to write something that manually verifies if loaders stop loading and restart the loading process, but I was wondering if we're simply not listening to the right error events (right now we listen to progress, complete, and IOErrors) or if there are other solutions ?
I'm having trouble setting the focus on the next text box on the form after a message is displayed. Here is what I have??
[Code]...
I am trying to and I have the following message error:"the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
View 1 RepliesI've created some error handling for external images loaded via a path in XML. Within the Flash preview it's fine and shows the full error message (and most importantly, the URL that isn't loading).
But in the browser, even locally, it doesn't out put this message!
Here's my code:
function loadIOError(event:IOErrorEvent){
errorLog+=event.text+'
';
}
[Code]....
#1006: value is not a function. at MethodInfo-43() I don't know what the problem is, or where could it be, here is the problem code, but first a brief description: Every 3 seconds 3 enemies will be created with a random position, the enemies can't be appearing on top of the other so I check if they collide with any previously added enemies, if they do I assign other random coordinates and check again until there is no collision (I'm using the collision detection kit CDK for the collisions[URL]..the first 3 enemies appear correctly but afterwards the error appears and the next time the program enters the generation part the enemies begin appearing in ridiculous numbers.
[Code]...
i am new to flash (yet i have been using it for years) by that i mean, i struggle with it a lot. i was hoping someone could help me with the "incompatible override" error message and the "duplicate function definition" message.
[Code]...
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
How do I use loadXML to extract the xml i just uploaded. "the xml uploaded successful.
[Code]...
I have used loadXMl.as file for XML to Object conversion till date. I am now converting the framework from AS1 to AS3.
Is there any alternate in AS3 for XML to Object conversion other than using the XML class. I am facing a lot of problems with XML class which I am not used to.
Here is the example
[Code].....
though I expect it to show undefined as the tag does not exist in the XML file.
I've been working on some actionscript 3 system. And all of a sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in Flash CS3, a white screen would open up (instead of the normal flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't execute. And without any error message! I was wondering, why is that? By the way, the following lines do work[code]...
I am building a calculator which recommends battery chargers based on the value the user inputs. If the user inputer letters instead of numbers (including spaces) the numeric result displays as NaN, is there any way to create an error message which pops up when the result is NaN and tells the user what they did wrong I have tried [code]where ampSuggest is a numeric variable that is the resulting number from the users input and wrongInput is a one frame movieclip.This method gets no error messages but doesn't seem to actually do anything.
View 2 RepliesOn the first frame of my timeline is the code for an MP3 player that exists in the 4 following frames, which are separated by frame labels. I am trying to call a different Mp3 URL in each different frame, but am getting this error msg: TypeError: Error #2007: Parameter url must be non-null.
Here is the code on the 1st frame:
Code:
var sndObject:Sound= new Sound();
var chaObject:SoundChannel= new SoundChannel() ;
var sndTransform:SoundTransform= new SoundTransform();
var reqObject:URLRequest = new URLRequest();
var sndBytes:ByteArray= new ByteArray();
var intPosition:int = 0;
var bolStop:Boolean= true;
function initMP3Player(reqObject:String):void {
[Code] .....
And this is how I am calling it on 4 following frames:
Code:
initMP3Player("[URL]");
Any work-arounds to what appears to be a bogus error message?Multiple buttons to control a movie and one (defined with the exact same process/steps as the others) results in the 1120 error.[code]No syntax error, but test run results in 1120 error on the P_button event.Instances are established for both and the names are spelled correctly. Is there some undocumented feature about what characters can't be used in instances and button/movie definitions?
View 2 Repliesit seems that I have installed wrong or corrupted component files, because every time i open Flash and try to use any component, there come error messages like "Unexpected file format" and Flash closes inmediatly after that... I reinstalled Fash , but it is still displaying that error... so I guess there must be a file where I can delete all the previous components installed, and make it work from scratch... how do i do it
View 6 RepliesI have custom validator apllied to many comboboxes in different tabs of application. Its is performing the same validation for all the comboboxes. The only difference is for ecah combobox the custom validator should return a different error messagae. How can error message be specified.?like some error property in mxml or by somehow passing the error message as parameters to custom validator class, as I dont want to have one custom validator for each component.
View 2 RepliesI have a class, called GMScores, and in it I have two variables gameStamp, and gameID.Here is a short version of the class:
ActionScript Code:
package {
import flash.display.Sprite;
[code]....
I was trying to create a play and pause button for a long animation. It was decided not to have a pause button, just a button to start. After deleting the pause button and all ActionScript to do with it, I now get this output error[code]...
View 2 RepliesI have translated this AS2 script:
MovieClip.prototype.shiver = function(xScale, yScale, strength, weight) {
var xScaleStep = 0;
var yScaleStep = 0;[code].....
I don't get an error message but on stage nothing happens when I roll the mouse over the mc.
Iam trying to execute a SWF file which has its actionscriptwritten in AS3. When i execute this, I am getting an error messagewhich is as followsVerify Error 1030# Stack Depth unbalanced 1 != 0..
View 4 RepliesI'm having a problem with Flash and InDesign (both CS4), installed as a bundle in one go from Adobe Master Collection discs, When trying to launch InDesign or Flash, I get a message that they are 'not supported on this architecture'.
I'm on a MacPro with 2x3GHz Quad Core and 4GB running 10.5.7.
All the other CS4 Master Collection apps have installed and run fine.
My volume is formated as Mac OS Extended (Journaled).
I am basically creating a Music Player using Flash CS4, iam loading the tracks & all info from a text file & ID3 tags.the code works fine in Flash CS3, but spits out this error in CS4[code]...
View 6 RepliesI have the following to open my file in full screen mode, but am getting the error message below.[code]...
View 2 RepliesI have getting the following message when trying to play external mp3 files:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error. at playingExternalMp3_fla::MainTimeline/frame1()Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error. at playingExternalMp3_fla::MainTimeline/buttonFunction() at playingExternalMp3_fla::MainTimeline/load1()
These message appear in the output panel every time I slect the button for that sound file? Is there a linkage problem?
[Code]...
Everytime I click on the snippets panel, I get the following message:
The following JavaScript error(s) occurred:SyntaxError: missing ) after argument list
I tried making a new user on my computer but get the same error message with that user as well.
I am using Mac OS 10.6.3. Master Collection CS5.
I created a slideshow using OOP and it works fine when I test it both in 'Test Movie" and 'Publish Preview', yet when I try to load the SWF into my site I keep getting error messages.[code]...
View 2 RepliesI am using CS5 Flash and have developed a very large system with several thousand lines of code, a main timeline, and some dozen classes. Sometimes when I test it, I get get the error message below.Error creating SWF fileBe sure the destination file is not read-only or opened by another applcation. Also check that the file name is not too long.It appears to happen at random. Many times it doesn't appear at all and the FLA simply complies. Other times it may appear several times before the FLA complies. If there are errors in the FLA file, normal error messages are displayed. If there are no errors in the FLA, I get this random error message.
View 2 RepliesI can produce ipa and release to apple store by CS 5.Now I try CS 5.5 in my office , it cannot sync to my iphone. No error message found, just when sync , the check box of that ipa being unchecked.I am considering to upgrade to cs 5.5 but cannot view the different...
View 1 Replies