I can produce ipa and release to apple store by CS 5.Now I try CS 5.5 in my office , it cannot sync to my iphone. No error message found, just when sync , the check box of that ipa being unchecked.I am considering to upgrade to cs 5.5 but cannot view the different...
View 1 RepliesI am trying to and I have the following message error:"the video player is in the connection error state. It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found."
View 1 Repliesit seems that I have installed wrong or corrupted component files, because every time i open Flash and try to use any component, there come error messages like "Unexpected file format" and Flash closes inmediatly after that... I reinstalled Fash , but it is still displaying that error... so I guess there must be a file where I can delete all the previous components installed, and make it work from scratch... how do i do it
View 6 RepliesEverytime I click on the snippets panel, I get the following message:
The following JavaScript error(s) occurred:SyntaxError: missing ) after argument list
I tried making a new user on my computer but get the same error message with that user as well.
I am using Mac OS 10.6.3. Master Collection CS5.
I am using CS5 Flash and have developed a very large system with several thousand lines of code, a main timeline, and some dozen classes. Sometimes when I test it, I get get the error message below.Error creating SWF fileBe sure the destination file is not read-only or opened by another applcation. Also check that the file name is not too long.It appears to happen at random. Many times it doesn't appear at all and the FLA simply complies. Other times it may appear several times before the FLA complies. If there are errors in the FLA file, normal error messages are displayed. If there are no errors in the FLA, I get this random error message.
View 2 RepliesWhen I test some of my as3 movies a new window opens and I can test the file. Yet when I test other movies I get an (error opening url 'file message.) What causes that? It seems to me that if a movie plays it should also test in a new window.
View 2 RepliesWhen opening a fla - made in cs5 - in flash cs 5.5 a message asks if I agree that the file will be converted to cs5.5. I agreed to the conversion and saved the file.When opening this "converted" fla I get an output error message: #1014: class fl.video::UIManager could not be found.The file is 08End.fla from Classroom in a Book Lesson 8.
View 3 RepliesHow do I make my flash website detect if someone tries to view my website using an iphone? My need is to display a message for iphone users.
View 1 RepliesI am developing an iPhone app with Adobe Flash and I can't figure out how to send a text message directly from within the app.[code]...
When the function is run on a phone, the default SMS client is launched with the telephone number already entered
But is it possible to send an SMS text message without opening the SMS client?
Or is it only possible by calling an external server?
I just finished with developing my application by Adobe Flash Professional CS5 and I wonder if this will be visible to iPhones 4 because support for Retina displays was added since CS5.5.
There is section in my info.plist:
<key>UIDeviceFamily</key>
<array>
<string>1</string>
</array>
I saved my work and a backup. This morning I got the dreadful message "failed to open document" followed by the path to the file. The output panel gave me this message: The following JavaScript error(s) occurred:
In file "/Users/lucilarios/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Javascript/ObjectFindAndSelect.jsfl":
Cannot find file /Users/lucilarios/Desktop/Trabajo_Macondo3/ProjectAlgebra09/Tutorials Algebra/Integers/LawsOfAddition/NewProject/AssocLawAdd.fla.
The info on the file size shows 0 bites. Both the file and its backup were corrupted.Are there compatibility issues betweenAdobe CS5.5 Programs and Mac OX Lion? Lion has crashed my computer several times and other programs like Photoshop and Adobe Bridge have also misbehaved.
I've created some error handling for external images loaded via a path in XML. Within the Flash preview it's fine and shows the full error message (and most importantly, the URL that isn't loading).
But in the browser, even locally, it doesn't out put this message!
Here's my code:
function loadIOError(event:IOErrorEvent){
errorLog+=event.text+'
';
}
[Code]....
#1006: value is not a function. at MethodInfo-43() I don't know what the problem is, or where could it be, here is the problem code, but first a brief description: Every 3 seconds 3 enemies will be created with a random position, the enemies can't be appearing on top of the other so I check if they collide with any previously added enemies, if they do I assign other random coordinates and check again until there is no collision (I'm using the collision detection kit CDK for the collisions[URL]..the first 3 enemies appear correctly but afterwards the error appears and the next time the program enters the generation part the enemies begin appearing in ridiculous numbers.
[Code]...
i am new to flash (yet i have been using it for years) by that i mean, i struggle with it a lot. i was hoping someone could help me with the "incompatible override" error message and the "duplicate function definition" message.
[Code]...
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
Following this tutorial: http:[url].....But I keep getting this error message:1046: Type was not found or was not a compile-time constant: CuePointEvent.
how to sync to mpr3 audio files at specific points?
I've got my head around bones now, which isn't too bad once you get used to it. I have ten minutes of dialog which I have created mouth movements for in Lipsync MX, these are imported as a swf and then placed within my character's Head MovieClip.
Problem is, IK insists on using MovieClips instead of graphics. This means that the lip sync doesn't stay in touch with the main timeline - it only stays in sync until the main timeline is paused or jumps to a different point.
Is there an established method which allows you to embed a lip sync symbol within part of an armature and ensure it keeps pace with the main timeline, or am I going to have to code it somehow?
I have made an animation. I have a layer where I put sounds that execute on certain frames. No script are involved. When I play the movie inside Flash, everything looks good and sounds are syncing. When I make a preview of the movie, some of the sounds are out of sync. I have no idea why, it's the first time I get this kind of problem. All sounds are set to event, but I have tried with stream as well and get the same result.
View 1 RepliesAny programs out there that will automatically lip sync your animations for Flash that are available for OS X. I've found a few out there, but they're for Windows. If not, does anyone have a simple trick to make it less time consuming? I used to mess around in Flash but it's been ages. I remember essentially making each character a movie? Or was it making the mouth a movie? It ended up being that on the timeline you would just press a button and the right mouth would come up. I bet that sounds mental. Just keep in mind my Flash knowledge is super limited.
View 1 RepliesI'm working on an animation where some guys sings and in order to make that look good, i need some good lip syncing. Since this is not short clips, but a whole song on 2-3 minutes, it's very hard for me to make the lip sync perfect because I have to replay from the beginning in order to hear the music. So question one is: Are there a way that I can play the movie in the middle and still hear the music? And so the second question is that I can barely see the sound waves in the Music layer, even though there's lots of music. Here's a picture of how big the sound waves are: And that's in the middle of the song! The problem is not that the music is too low, because it's quite high. So question number two is: Are there a way that I can make the soundwaves bigger in the music layer without affecting the music itself?
View 1 RepliesI have an animation that I am exporting as either a .wav or .mov file then editing in different software but when I import the new file it is out of sync. That sounds confusing so I will explain. The project is a cartoon and a temp dialogue track was created before animation started. Then that temp track was used to animate over and do lip synching. Recently, actors have re-recorded the original temp dialogue track. So, I need to export the original dialogue track out of Flash, use an editor, in this case Final Cut Pro, and replace the dialogue then export that as an audio file and bring it back into Flash.
But it is always out of sync. I have even exported a .wav file from Flash then immediately re-imported it and put it on the timeline and it is already out of sync. And it is the exact same audio! I don't even know how that could be possible. Surely if you export a wav from Flash and then re-import it, it should be exactly the same.
We are creating a 30-track mixing desk to demonstrate our percussion instruments. Take a look at www.bellpercmixer.com. As you can probably hear, the audio is not properly syncing up.
The files should be exactly the same length (8 seconds) but they are mp3s so I don't know if the compression messes the length up as I know it adds the gap between the loop? More than likely, it is my lack of action script skill that has caused this problem... e.g. does each track need to be on a separate layer with a sync-track type thing? Here is an example of the script:
[Code].....
I've run into a bit of a problem using Adobe's CS3 flash program in terms of lip syncing... I can place the sound files in the timeline at whichever point I like and so forth, but I have no way to play them in such a way where I can adequately make lip syncs. It's hard to explain, but in flash MX I would merely click the timeline, drag the cursor along it, and it would play the sounds as it did the frames, one piece at a time. That way I could tell where the consonants were and therefore where to change my characters' lips. This is not the same as simply hitting "enter" and letting the sound play in its entirety.
View 4 RepliesIf i create timeline slideshow with tweensbetween the pictures, how do I add music so that it ends when the pictures end?I read that audio can come out of sync??What if i use another program to create the swf like after effects that exports with audio? and import, would it lose sync then?
View 1 RepliesI'm sure I'm missing somethin simple; but I have spent hours looking and trying ways to do the following. I have a movie clip A (which is manually set to frame 1 or 2 or 3) and I have a movie clip B that is played when a timer is triggered. I want to move clip A down a bit during the first half of clip B and then back up bit by bit to its original location in the second half. Along the way I want to change the frame showing in clip A. For the first sixth of clip B I want clip A at frame 1, For the second sixth of clip B I want clip A at frame 2. I know the length of clip B. So I can hard code tests for when to do things if I know what frame number clip B is in.
View 12 RepliesI am using Flash CS3 on a PC. I am trying to export an animation to quicktime (Export > Export movie) and have some problem regarding the sound. The animation contains actionscript 2.0loads external swf contains streaming soundsplay other sounds via actionscript. 4 scenes. When publishing the animation, it works fine, but when exporting it to .mov, the audio goes faster than the video.
Export setting:
Video:Compression type: H.264Frame Rate: CurrentKeyFrames: 4
Sound:Compressor: 24-bit integerRate: 48.000KhzSize: 16BitUse: Stereo
To be honest, I tried many other compression types and frame rates and keyframes, but nothing seem to work.
I tried:
- importing the external swfs into the original animation
- creating a streaming silence from frame 1 for continuous sound
- capturing the animation using CamStudio, but it's not smooth enough
I am trying to edit and mix sound effects and music for a FLASH animation in ProTools. After much trial and error I figured out how to make an accurate Quick Time of my FLASH file to spot sounds to in ProTools. The problem is when I import my audio into FLASH, it speeds up making it out of sync with the picture. I did several tests and it looks like for ever minute of ProTools the audio in FLASH speeds up 2 frames. Both programs are running at 24 FPS.
It is not a NTSC vs Flim speed issue. All other programs read my PT audio file correctly and show it to be the correct length with the SFX where I placed them. FLASH speeds it up, making my animation not time to the music and effects causing me to resync all my layers. How do I accurately export a sound file into an AIFF format and import it into FLASH without FLASH changing the speed? I have my audio set to Stream as it should be. After 3 minutes my audio is 8 frames (1/3 of a second) out of sync with the picture.
I've been working on some actionscript 3 system. And all of a sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in Flash CS3, a white screen would open up (instead of the normal flash program) and no trace-output would be given.
Three hours later I found the cause of this weird problem.It's (simplified) the line:
var value:Number = -(true ? 1 : 0); // This one doesn't work.
Put this line in your script, and your entire program won't execute. And without any error message! I was wondering, why is that? By the way, the following lines do work[code]...
I am building a calculator which recommends battery chargers based on the value the user inputs. If the user inputer letters instead of numbers (including spaces) the numeric result displays as NaN, is there any way to create an error message which pops up when the result is NaN and tells the user what they did wrong I have tried [code]where ampSuggest is a numeric variable that is the resulting number from the users input and wrongInput is a one frame movieclip.This method gets no error messages but doesn't seem to actually do anything.
View 2 RepliesI'm using Flash CS4 to animate hi-def music videos. It seems that I can't keep the audio to stay in sync for anything over 2 or 3 minutes.
- I'm working a stage at 1280x720 and 30 fps
- audio is streamed on a separate layer
- mp3 publish settings are: stereo 128kbs
Inside the FLA file everything syncs perfect, but when it's published, everything drifts in the SWF and in everything else I've tried.I've tried exporting image sequences and popping the sequences into premiere pro to match up with the original wave, and i've also put the swf file in a premiere pro project as well. Whether a SWF or an image sequence, it always lapses after 2 or 3 minutes.