Professional :: Flash Audio Out Of Sync Even As Image Sequence In Premeire Pro?
Apr 11, 2010
I'm using Flash CS4 to animate hi-def music videos. It seems that I can't keep the audio to stay in sync for anything over 2 or 3 minutes.
- I'm working a stage at 1280x720 and 30 fps
- audio is streamed on a separate layer
- mp3 publish settings are: stereo 128kbs
Inside the FLA file everything syncs perfect, but when it's published, everything drifts in the SWF and in everything else I've tried.I've tried exporting image sequences and popping the sequences into premiere pro to match up with the original wave, and i've also put the swf file in a premiere pro project as well. Whether a SWF or an image sequence, it always lapses after 2 or 3 minutes.
View 12 Replies
Similar Posts:
Aug 14, 2011
I have an animation that I am exporting as either a .wav or .mov file then editing in different software but when I import the new file it is out of sync. That sounds confusing so I will explain. The project is a cartoon and a temp dialogue track was created before animation started. Then that temp track was used to animate over and do lip synching. Recently, actors have re-recorded the original temp dialogue track. So, I need to export the original dialogue track out of Flash, use an editor, in this case Final Cut Pro, and replace the dialogue then export that as an audio file and bring it back into Flash.
But it is always out of sync. I have even exported a .wav file from Flash then immediately re-imported it and put it on the timeline and it is already out of sync. And it is the exact same audio! I don't even know how that could be possible. Surely if you export a wav from Flash and then re-import it, it should be exactly the same.
View 8 Replies
Mar 2, 2010
We are creating a 30-track mixing desk to demonstrate our percussion instruments. Take a look at www.bellpercmixer.com. As you can probably hear, the audio is not properly syncing up.
The files should be exactly the same length (8 seconds) but they are mp3s so I don't know if the compression messes the length up as I know it adds the gap between the loop? More than likely, it is my lack of action script skill that has caused this problem... e.g. does each track need to be on a separate layer with a sync-track type thing? Here is an example of the script:
[Code].....
View 1 Replies
Jun 18, 2010
I am using Flash CS3 on a PC. I am trying to export an animation to quicktime (Export > Export movie) and have some problem regarding the sound. The animation contains actionscript 2.0loads external swf contains streaming soundsplay other sounds via actionscript. 4 scenes. When publishing the animation, it works fine, but when exporting it to .mov, the audio goes faster than the video.
Export setting:
Video:Compression type: H.264Frame Rate: CurrentKeyFrames: 4
Sound:Compressor: 24-bit integerRate: 48.000KhzSize: 16BitUse: Stereo
To be honest, I tried many other compression types and frame rates and keyframes, but nothing seem to work.
I tried:
- importing the external swfs into the original animation
- creating a streaming silence from frame 1 for continuous sound
- capturing the animation using CamStudio, but it's not smooth enough
View 1 Replies
Feb 21, 2011
I am trying to edit and mix sound effects and music for a FLASH animation in ProTools. After much trial and error I figured out how to make an accurate Quick Time of my FLASH file to spot sounds to in ProTools. The problem is when I import my audio into FLASH, it speeds up making it out of sync with the picture. I did several tests and it looks like for ever minute of ProTools the audio in FLASH speeds up 2 frames. Both programs are running at 24 FPS.
It is not a NTSC vs Flim speed issue. All other programs read my PT audio file correctly and show it to be the correct length with the SFX where I placed them. FLASH speeds it up, making my animation not time to the music and effects causing me to resync all my layers. How do I accurately export a sound file into an AIFF format and import it into FLASH without FLASH changing the speed? I have my audio set to Stream as it should be. After 3 minutes my audio is 8 frames (1/3 of a second) out of sync with the picture.
View 3 Replies
Mar 11, 2010
Because the player optimizes framerate, antialiasing etc dependent on the performance capabilities of the platform upon which it is running, it was nearly impossible to ensure animation syncronization w/ audio. If the audio were on the timeline you could set sync params to stream, but if the audio is loaded programically forget it .. well until AS3 ..The following code throttles the player framerate to lock step the animation to the audio .. not perfect but the principal works ..
View 1 Replies
Dec 5, 2011
I have a project that involves playing back a video clip within my swf movie. The video clip plays fine on its own, but when brought into flash the video and audio become out of sync and the movie quality suffers dramatically. I have tried embedding and streaming.
View 1 Replies
Feb 28, 2008
Im having serious issues making a video sync with audio inside an embedded flash video file.
View 2 Replies
Jan 17, 2010
I am working on a big project today and I'm importing images in by the hundreds. Is there an easy way to import an image sequence into the timeline? I remember there use to be with earlier versions of flash but I can't figure it out for CS4 - Luckily these images are named sequentially.
View 6 Replies
Feb 13, 2011
I have Adobe Flash CS5 on Windows 7 x64 installed and when i try importing 360 images throught image sequence in Flash, my Flash crashes. Anyone know how do i fix this problem
View 11 Replies
Mar 23, 2011
I am working on an animation with two masks, which plays in Flash as expected, an exported SWF is ok, an exported Quicktime is ok, except for the dreaded ghosting which renders it useless, but when I export it as an image sequence (gif, png or jpg), one of the masks is consistently ignored, while the other one masks as expected. This already shows when I export one single frame as an image. As a result, I currently have no way to create a quicktime movie for this animation (running CS4 on OSX 10.6.5)
Any other way to arrive at a quicktime movie?
View 1 Replies
Jul 30, 2011
I'm unable to export an animated symbol to image sequence properly because the symbol does not animate.I created the tweens in multiple layers, then cut-pasted all layers to a new symbol.I did this so I could then just do some tween motions on the symbol.The tweening is perfect, but when I export the image sequence, the images do not animate the way it does on the Flash player.All I get is an image sequence with the tweened symbol, but the symbol itself does not animate.how to get the symbol to animate when exporting the image sequence.
Alternatively, is there a way to motion-tween multiple layers simoultaneously? (Layers which are themselves tweened)Any additional info, I'll be checking regularly so I can provide as much description as possible to get this to work.
View 1 Replies
Dec 7, 2009
When I use the webcam and microsoft to record a video, my audio and video are out of sync.This does not happens when I use the built-in Microphone on the webcam.
View 2 Replies
Apr 9, 2011
I am streaming live content via flv but the video is lagging audio by some time. I am using netstream and video but cannot find a way to set the FPS for the video, I think i could fix it if I knew how to adjust the FPS
View 1 Replies
Oct 12, 2011
I need to export an animation from flash as a PNG sequence. I'd like the exported PNGs to be as small as possible so I'm checking off minimum image area instead of full doc size. But this had no effect it still uses the full doc size. I can export a single image and it works then. I deleted anything that could be altering the size. I even tried it with a simple scene with just a box and it still uses the doc size. I can scale down the doc, but that is very time consuming and won't allow for easy iteration so that's not an option. Is this a bug, does it just not work?
View 2 Replies
Jun 30, 2011
I have a voice over that I am trying to load, and sync with on screen animations. So when the narrator says something the animations back it up. However, when I embed the audio clip in the timeline, it makes my whole flash movie slow to a crawl, and everything gets out of sync anyway. When I load it externally using AS3 like this:
ActionScript Code:
var my_sound:VoiceOver = new VoiceOver();
var channel:SoundChannel = my_sound.play();
Everthing works great, but I don't know how to sync it with my movieClip that contains my animations. Is there a way to have the external audio sync with a movieClip on the timeline?
View 7 Replies
Jul 6, 2005
Are there issues with using attachSound to sync sound clips with Movie Clips? I currently am having this problem. I have all my sounds in a separate swf (sounds.swf), then I call the sounds like this:
Code:
gear1_btn.onRelease = function() {
logo.gear1.play();
sounds.gearssmfx.start();
}
I build the movieclips with the sound on the timeline, so that I know they sync up. Then I remove the sound from the movieclip, and actually play the sound with the AS above. The above AS should play the same in the browser, but doesn't. The problem is that the movieclip animations often run slower in the browser than they did within Flash. Is is possible that the movie is running at a slower FPS in the browser? I have noticed that it runs slightly slower in Firefox than IE. I'm currently using 32fps.
Here is my development : [URL]
Specifically, I'm having problems with the gears next to the letter "S" and "0", click on them to play.
View 2 Replies
Aug 18, 2009
We use a Flash component to allow a user on our web site to record from a Webcam on to our own Flash Media Server. The problem we are having is that the video in a 30 second FLV freezes at the 7th second but the audio continues. The video unfreezes after a couple of seconds but never catches up with the audio. At the very end there's a "Fast-forwarding" of video for the last few seconds so that at literally the last moment, everything's in sync. This happens for almost all of our recordings. Has anyone experienced this type of behavior?
View 5 Replies
Dec 18, 2009
I am calling some streaming video on frames 1-11 to play for a multiple choice game. My video and audio are out of sync at times on frames 3-11? [code]...
View 1 Replies
May 13, 2011
I have a long timeline (5000+ frames) with cartoon animation and streaming dialogue sound on it. I've run into the dreaded audio sync problem. I found many discussions, peaking around 2005, but no solutions for this problem. I have a track of silence to ensure frame-dropping even between lines of dialogue. Prior to around 2000 frames the error is not noticeable.
My testing shows that playback is off by 2 frames per 1000 at 24fps. So at frame 10,000 the audio is out of sync with the graphics by 20 frames, nearly a second. This is predictable and reproducible on a variety of PCs and an iMac. I'm publishing to Flash 8 + AS2, but publishing to Flash 9 or Flash 10 don't make any difference at all.
I don't want to split this into multiple SWFs. Scenes don't help. Putting things into multiple movieclips would complicate my controls and our workflow. Just shifting the audio on the timeline is preferable to those solutions, but it makes maintenance difficult.
View 4 Replies
Sep 23, 2011
I created a Flash program that utilizes audio and text. The audio is located in an external folder and is loaded using .loadSound(). The text is located on the timeline and appears based on a certain time in the audio. I have a pre-loader that looks to ensure all of the external audio is loaded before the user can move onto the appropriate screen and the audio would play. This is using a combination of the .getBytesTotal and .getsBytesLoaded.
It works fine on Windows 7 but doesn't seem to be working one particular user's Windows XP on IE 7 (So it's not happen on all Windows XP). On a particular user's computer, the text is slow to load while the sounds loads pretty quickly leaving the text out of sync. After a few screens, the text will catch up with the audio.
View 6 Replies
Jan 21, 2011
I'm trying to record a stream from a webcam using FMS4 developer edition. The streams are recording on a linux box in .flv files. These files though have problems.
1 - The video quality is terrible. Fuzzy/blocky. Any kind of motion looks awful. Is there any way to improve this?
2 - The sound jumps/skips and goes out of time with the video.
As it is now this is useless. I am trying to make a system where a user records a short video from the camera and then I upload it to YouTube from my server. If you use Youtube's webcam page the video quality is quite acceptable and the audio is obviously in sync too, so they must know something I don't. [URL]..
View 2 Replies
Jan 4, 2012
I did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 Replies
Mar 21, 2009
Following this tutorial: http:[url].....But I keep getting this error message:1046: Type was not found or was not a compile-time constant: CuePointEvent.
how to sync to mpr3 audio files at specific points?
View 1 Replies
Oct 8, 2010
Writing RTMP Streaming Server for streaming AVC+AAC video. And it works fine with rtmpdump. But I can't force it to work in flowplayer and other flash video players.The message sequence after handshake is similar to FMS / RED5 / erlyvideo / haxevideo servers: I've tried a lot of variations.
From Chrome debug console I can see, what all negotiating messages passed to the flowplayer. The last one is onMetaData. And after this the working sample (rtmp://flash.tvwmedia.net/LiveVideo//Live300) gets NetStream.Buffer.Full. And streaming from my server don't get it.
I'm starting with AVC Header message, containing sps/pps. After it first AVC picture passed. After - AAC header and AAC sample. And then AVC/AAC samples. This dumped OK by rtmpdump - I have working flv on exit. But flowplayer and others does not work.
[Code]...
View 2 Replies
Jun 13, 2011
I am using:
Win7 32bit
2GB RAM, Intel Core 2 Duo 2Ghz
Flash CS5
and I have this problem: i am currently trying to create a 720p movie consisting of 738 single JPG pictures; 6 frames/second. Each picture has 204 KB, all the pictures together add up to 226 MB.Yet still, Flash is crashing (due to memory overload?) once I have loaded like 100 pictures of my sequence... I loaded 90 pictures and tried exporting it as a small AVI-movie, but even that made Flash crash. I checked the Windows task manager, and I saw that even with only 90 pictures loaded, Flash already takes up 1,6 GB of my RAM.Is there a way making Flash save those pictures not on the memory, but on the disk, in a temporary folder or something? I wouldn't care if it takes way longer.
View 1 Replies
Oct 13, 2010
Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3. When I export a video from Premiere with the settings: 1280x720frame rate of 23.976using H264 or Animation (basically every codec produces the same results),"embed video on SWF and play in timeline" When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either.
View 2 Replies
Feb 5, 2010
I have made an image sequence that listens to mouse movement left or right (if i move the mouse 1 px left - the previous frame appears, and if mouse moves right - the following frame appears).My problem is that the transition between the frames, when moving the mouse too fast, appears to be very "jumpy" (the sequence can move from frame 20 to 25 when the mouse moves too fast, making it look very bad) Can I control it like there is a max speed for the mouse movement? Or maybe a max speed for the frame transitions (frame-by-frame)?ere is my code that listens to the mouse event:
if (Flag) {
var activeMouseX = stage.mouseX;
if (activeMouseX > prevMouseX){
[code]......
View 8 Replies
May 12, 2009
way to load an image sequnce to flash in as3, so that the sequence remains in order, on a timeline.
View 6 Replies
Jul 18, 2011
I have a rotating product as an image sq inside a MC. When the user clicks a button I'm pausing the MC (.stop()), but that obv looks a bit naff as it just stops. Ideally I would like to have a bit of easing on before it stops...
View 1 Replies
