Flash :: Professional - Sync And Frame Rate Importing Video To CS3
Oct 13, 2010
Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3. When I export a video from Premiere with the settings: 1280x720frame rate of 23.976using H264 or Animation (basically every codec produces the same results),"embed video on SWF and play in timeline" When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either.
View 2 Replies
Similar Posts:
Nov 17, 2010
I am a student and I use CS4 on a Mac on one of the schools computers. One of the animation projects I am working I need to animate a music video. To do this I calculated out the BPM of the song and set the frame rate at 23.3 FPS so that I would have 20 Frames between beats. Then to have a visual representation of the timing I set a layer that has a red dot blink for 2 frames every 20 frames starting on the first beat.
With it set up like this and I run the animation in Flash it keeps time correctly and works. However, when I test the video the time is off. I tried changing the frame rate to 60fps as an arbitrary number to see if adjusting the frame rate had any affect of the test file but when I tested the video at 60fps it did not run any faster than before. I exported the video to a SWF and MOV file but it was still off.
View 1 Replies
Apr 25, 2010
I'm recording Webcam to FMS 3.5 but when I play the recorded video from FMS it's choppy. I have set the camera.fps to 30 but when I trace out the currentFPS for camera it's variable and usually falls between 20 and 30. However when I play the recorded video, netStream's currentFPS returns a lower value, something closer to 10. So my question is, 1) why currentFPS of netStream is not the same as Camera's? 2) What's the actual frame rate of the recorded video (not the netStream, but FLV's)?
View 2 Replies
Sep 21, 2004
set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within.
I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Feb 10, 2012
im currently making a multimedia product for my A-Levels ICT ... and had an issue with importing a video into my product the video was converted to flv using flash media encoding and then i embeded it into timeline using the movie symbol. the only issue which i have now is thatl it doesnt have a skin e.g. i cant stop or play the video.
I've tried creating buttons to stop and play it but they dont seem to work
here is the code which i used
play button
play.onRelease = function(){kvideo.play();}
stop button
stop.onRelease = function(){kvideo.stop();}
i cant rely flash to access the video from a folder because it has to be sent to an exam board which means that they will only take the .swf file and nothing else so i have to make sure that the video is embeded into the multimedia product... also the video has sync issues with sound ( i know it gave me a warning about this when importing it into time line..) would it solve this if i have two seperate files? have one just a video and the other with sound... maybe import sound seperately?
View 1 Replies
Mar 9, 2010
I attached the code here. The problem is after importing the video in the first frame while navigating the video sound is heard which means the video is still playing. How can I stop it when moving to other section. Here is code
[Code]...
View 2 Replies
Jun 22, 2010
I've got a few encoded high definition videos that are now .flv files and I'm wondering which is the best option to choose when importing the .flv file into my Flash project? I'm looking for fastest loading/streaming with best quality to be the result. If I choose a streaming option like progressive download from a web server, would the choice be dependent on the type of server the file(s) are hosted on? I'm using Flash Professional 8.
View 3 Replies
Jan 1, 2011
I am running on Dreamweaver CS5 in Code View...I have imported a flash video, which displays in design view, but will just keep loading in the actual browser and never start the video. It is running through an Apache localhost and is a PHP file...could that mess it up? I am also using jQuery with a bunch of hidden popup views, that work fine. What's wrong with my flash? Here is my source code to my flash video file:
[Code]...
View 1 Replies
Feb 3, 2011
I am having a problem getting my flash file to work on my webpages. I first converted the original .avi to a .flv format,then I imported the.flv into flash. It has a skin because I wanted the users to be able to stop and pause the video. When I test the file outside of the web page it works fine. The skin file, the .flv and the .swf are all in the same folder. But when i Upload the webpage , the flash does not play online. If i preview in design mode, the flash file plays. Although with out the skin. Now if i open the flash file outside of the webdesign software it opens in a web browser and all works.
View 1 Replies
Sep 29, 2010
I recently built a flash movie that I am going to export out into a quicktime movie for YouTube. I mistakenly built it with the frame rate of 12 fps and I need to switch it to 30 to make it compatible for YouTube.
My question is:
Is there an easy way to change the frame rate from 12 to 30 and keep the same timing that I have with the movie at 12fps? The only way I can think to do it is manually, but I was wondering if there is an easier way.
View 3 Replies
Sep 21, 2004
it possible to set the frame rate of an externally loaded movie to a different frame rate than the movie it is embedded within. I basically have a flash site that loads flash movies using loadMovie command, however, the frame is lost within these movies and simply adopts the main site frame rate.
View 2 Replies
Mar 28, 2008
I just went to the site www.aroots.com, according to its interface, the frame rate (fps) is changing.
is it possible to change the frame rate at runtime?
View 6 Replies
Jun 29, 2010
I've got various mc's sitting inside my overall site. The FPS of the overall site is 20 but I want to run another mc inside it at 10 and different one at 28.Is this an actionscript task or is there another way of doing it?
View 3 Replies
Aug 30, 2011
I have an older flash application, it uses actionscript 2. Its logic is heavily tied to the frame rate (using onEnterFrame lots of times). I need to accelerate its calculations.
The maxmimum frame rate Flash Professional lets me specify for it is 120. Is there any way to make this higher? I don't necessarily have to change the fla or the swf, being able to play it faster locally would be sufficient, if the flash player can be tweaked to accomplish that.
View 1 Replies
Mar 4, 2011
I understand that in order to make it consume less CPU cycles flash player forces the player to only execute at 2fps (or some other ridiculously low amount) when the swf is no longer in focus (or even if it's still "in focus" but not being rendered to the screen by virtue of being in a section of the browser window that's scrolled offscreen.) Is there any possible way to change this? I have a 3D engine that needs to keep the FR up.
View 7 Replies
Feb 11, 2010
How does frame rate influence load and/or render time?
View 2 Replies
Mar 5, 2010
What would be best practice for speeding up an animation? - Increase the frame rate, or is that considered cheating (already set to 25)? The alternative would be to manually adjust the length of the tweens on each layer.
View 2 Replies
Dec 5, 2011
I have a project that involves playing back a video clip within my swf movie. The video clip plays fine on its own, but when brought into flash the video and audio become out of sync and the movie quality suffers dramatically. I have tried embedding and streaming.
View 1 Replies
Sep 6, 2010
i have to set the stage frame rate according to the frame rate of the flv and I will have differnet flv with different frame rate so i have to get frame rate of FlV using action script ??
Is there any method available in Video Class of ActionScript??
View 2 Replies
Feb 28, 2008
Im having serious issues making a video sync with audio inside an embedded flash video file.
View 2 Replies
Jun 7, 2010
I'm building an application in Actionscript using Flash assets, and my frame rate becomes very low (~7 fps) when I attempt to render 20+ assets on the screen, even though most of those assets are stopped movie clips. I've tried setting .cacheAsBitmap to true, which helps a bit, but not enough. What else can I do to get the frame rate up? I've noticed that some movie clips seem to impact it more than others, but I'm not sure how to alter them to make them easier to render.
View 2 Replies
Nov 7, 2010
I have a Flash game I made way back in 2008. It runs super fast these days. Way too fast in fact. I have it set to 60fps in FlashDevelop, but I think that is just limiting the amount of draw calls. I think my logic is executing well past 60 times a second these days. I haven't done ActionScript in a while, but I noticed that I am using an enterFrameHandler that executes my logic loop. It seems to have no constraint set on it. It just fires away as it is called I believe. Is there any way I can cap it at 30 or 60fps?
UPDATE:As some ActionScript knowledge is coming back to me I just thought of something. Isn't the enterFrameHandler bound by what the fps is set to in Flash or FlashDevelop under project properties?
View 1 Replies
Jun 21, 2006
Possible to change the frame rate of flash using Actionscript? If no what we can do with Tween.fps? is it work on tweened symbols or what?
View 2 Replies
May 3, 2009
Is it possible to set the frame rate for flash 8 transitions? So if I have transition:
TransitionManager.start(img1_mc, {type:Iris, direction:Transition.IN, duration:5, easing:Bounce.easeOut, startPoint:5, shape:Iris.CIRCLE});
how would I set desired frame rate?
Something like:
Tween.FPS = 30;
View 1 Replies
Aug 2, 2009
i am new here i am experiencing a huge problem with my flash movie. okk let me start:- I am making a website which has an intro. Intro Frame rate = 35fps My site frame rate = 20fps so when i load the intro swf with 35fps, its frame rate automatically changes to 20fps which is my site's swf frame rate. My intro loads in a movieclip named holder_mc i have masked my movieclip to avoid unwanted part of loaded intro.
View 2 Replies
Aug 10, 2011
Any way that I can adjust the frame rate of a movieclip without affecting the frame rate that I set for the rest of the document. I want to speed up the animation of this clip and it would be difficult to adjust the timeline of this clip to accomplish this.
View 7 Replies
Jan 22, 2011
I am building a small flash application. In my application I've inserted an fla video. the flv video's length when I open it in vlc player is 16 seconds (after I edit the speed of the video in an external program and then converted it back to fla). When I open it in flash cs 5, the video's length is back to 90 seconds. I guess it's got something to do with the frame rate of my flash project. I'd like to be able to change the frame rate of only the movie clip containing that video, and not of the entire stage. How is that possible?
View 1 Replies
Dec 25, 2005
How to make a "frame rate visualizer" in flash 8. Because some of my animations have slow frame rates if I use some bitmap or png images, or some big vector objects. So, it is possible to make a real time "frame rate" visualizer for my flash animations? Just like the frame rate viewer of some games.
View 4 Replies
May 7, 2011
I want to know that how can I control frame rate of my flash movie from xml file or from AS2 code.
View 2 Replies
Jun 29, 2011
At the moment I am working on a project that uses the enterFrame event to update a game world at 30 FPS. I know that the movie frame rate I set in the Flash IDE is far from precise. However, I am using enterFrame because my assets (MovieClips and such) are animated within the Flash IDE and need to be synchronized with the frame rate.All actual programming is done with FlashDevelop, outside of the Flash IDE.I've heard that it is much better to make applications independent of the frame rate, presumably by using a Timer/getTimer() and updateAfterEvent() to draw.
All global ticks are handled through an interface I wrote that allows me to freely switch between frame tick implementations, so I can easily modify my code to accommodate whatever solutions are out there.Is there a way I can keep my animations in step with the global tick while removing dependency on the movie's frame rate?
View 14 Replies
