Here's what I want to do - create a textfield with some text in it, then use this text as a mask over a rectangle. All of which is created in code. I have my code here:
Code:
package
{
[code]......
I need to restrict my users to input only dates with a custom format. I want to have something like this example in JQuery=BMaTiGKykl8&feature=player_embedded
View 3 Replies1. If you have a dynamic text field and movieclip under a mask layer.
2. through actionscript you set the text of the text field, and set the frame of the movieclip.
3. You want the mask to animate, so you create a new keyframe at frame 10 in the mask layer, and change the shape of the mask. The problem is that when you play the movie and it reaches the keyframe where the mask changes, it resets both the text field and movieclip to it's initial state. I've run into this issue in both AS2 and AS3, and also using an animated movieclip as a mask. Whatever is underneath the mask gets reset. I've created a very simple fla to demonstrate this (attached).
I have several Sprites that are all combined in one parent Sprite. The parent Sprite then gets a Glowfilter applied and should then be masked by a Textfield.
Everythings working fine but as soon as I apply the Filter to the Sprite nothing shows... However, if I apply the Filter to every single Object that the Sprite contains, it works...
Is it possible to apply a dynamically created gradient mask on a textfield in flex?
View 2 RepliesI'm creating a playlist for a music player, and I've got the song names displaying correctly in my songTitle holder MC, but there's limited space for the song names to be shown in, and I'm going to eventually have it inside a scrolling movieclip. Problem is, the text inside the textfields disappear when I try to add a mask to the movieclip they're being loaded into. I've tried adding all combos of embedFonts, antialias, and blendModes I ran into, to no avail.how to mask dynamically created textfields with a non-dynamic (Flash IDE-made) mask.
Code:
for (var i:int = 1; i <= _size; i++) {
var pl_artist:TextField = new TextField;
//all embedFont = true and antiAlias commands no workie
}
I have a startDrag function set up on a loader and mask that when the mouse is down on the loader it drags, when not it doesn't. There is also 2 buttons that control whether mask1 or mask2 is used. What i would like however is when the mouse is down - the area of the loader outside of the mask is visible but only by about 10/20% alpha, that way the user can see where all the image is while dragging. Is this possible? Full code can be seen below and i have attached the zip with the .fla file:
[Code]...
what i am doing is to make something along the lines of the "scriptable mask" tutorial Inigo was kind enough to put up.My idea is to have a large mask behind the whole of my flash site, this masks a colour image with a black & white one (nothing tricky). The image I am using is actually 5 separate images combined, and each is a pic of certain parts of the site.I also have a very basic set of buttons along the bottom... each corresponding to each section.
All I want is to set it up so that when I mouse over the buttons, the _x of the mask moves to correspond with the correct image... really very basic... or so I thought .If anything it should be easier to do than what is in Inigo's tut (where he uses the _x of the mouse to move the mask)... i just cant seem to get it to work with a nice easing effect (its easy to get the mask to simply snap to each coordinate, but I need it to smoothly move).
maybe point me towards a better way to mask. png file is way too big. I have been using the mask layer option to create my own mask around a jpg image by drawing around it on the mask layer. There has to be a fetter and faster way to do this. Is it possible to maybe have a specific color range have an alpha value of 0. Similar to green screening whereas If I put the item I want to clip on a green background flash will auto take out the green for me. and by auto I mean action script maybe. I think this can be done but im not finding it.
how are these guys clipping these images [URL] they have the movie clips set up where the black background on the 3 layers of shoes is getting masked out. When I go into the shoe movie clips I see there is a black background but it just disappears when I go back to main timeline.
ive gotten one movie clip to mask another in the actions frame but i cant seem to be able to mask the flames which are a shape with a movieclip in this as file. im not getting any errors but the mask isnt covering anything look near the bottom at s.mask=mask_mc; there are about 20 "s" shapes spawning per second if that has anything to do with it
Code:
//this package turns an mc into a flaming button that calls a javascript function
package
{
import flash.display.MovieClip;
[Code].....
I was wondering if its possible to mask multiple MC or Sprites under one mask, when using AS3.abc.mask = a;cba.mask = a;something like that
View 2 RepliesI parse an xml file that his content is:
Code:
<?xml version="1.0" encoding="utf-8"?>
<operators>
<operator><name>OPerator1 </name></operator>
[Code].....
I display the name of operator in a TextField after parsing the xml file my problem is to loop through this different TextField with a fade effect.
how can i make a movieclip and a textfield to resize to the content of the text in the textfield? I mean, if I have a textfield with 3 letters font name XXX and then the content of the field change, how can i resize te textfield so the text dont autoadjust to the 3 letter space?
View 3 RepliesDoes anyone know, why a textfield may become white when loading text + JPGs into it? Sometimes it happens to me, sometimes not. I haven't figured out why. If you have any clues... The AS I'm using:
[Code]...
I am looking to change the background color of a input textField when the user selects that testfield to start populating it. I have done a bunch of searching and I keep coming up with this type of answer...
Code:
myTextField.onSetFocus = Set(evt:Event){
// Change color
}
Problems...
1) Is onSetFocus/onKillFocus still available? From what I can tell it is not.
2) I have my text objects encapsulasted in a class so I do not believe I am able to do it like I have been suggested.
I'm using the following to remove a textFeild from the stage I then need to add this textField back to the stage at a later time....i tried using addChild the problem is the text that was in the text field prior to the removal is still in the textfield when i re add it......How do i remove the textfield and replace it with a fresh textfield at a later time?....using msgTa.text =""; is not an option.
View 4 RepliesI just recently started playing with cs5 and it's new features. I tried to rotate a textfield with the 3D rotation tool, but when you do this, the textfields gets blurry.And it seems like it's not a vector text anymore, because when you zoom in, it still is blurry.Is there a way to prevent that?
View 5 Repliesi would just like to ask why is the case that when i use embedfonts = true on a textfield, the textfield's text only resizes according to the textfield's height but not the textfield's width. meaning if i make the textfield's height bigger, the text also gets bigger in terms of height, but not width, can't the embedded font maintain aspect ratio according to the textfield height?
I'm only wondering about this because this is not the case when embedfonts= false
in as3 how do i get the text of a textfield to know when to line break according to the width of the textfield.
View 4 RepliesI have MovieClip with TextField in, how can I dispatch when change text in TextField or remove TextField or add something else.
View 3 RepliesI want a radio button to be selected if a textfield is equal with another textfield. My code is wrong:
var s:String = sexul.text;
var p:String = femi.text;
if
(s == p)
sexulf.selected = true
[Code]...
Attached is basically a recreation of the problem. What I'm basically trying to do is a tooltip window with 4 frames. Each frame has different textfields but also some the same. Like the "Weapon" frame has textfields called namebox, typebox, levelbox, and damagebox, while the "Armor" frame has namebox, typebox, levelbox, and defensebox.
In the attachment there is a Movieclip called awd on the stage. It has 2 keyframes in it called "Weapon" and "Drop" each with their own textfields but they are both called "box". I have a click event listener that makes awd go to its second frame and outputs the second child in awd, which will be the textfield. The problem is when I click the first time, awd goes to the second frame but it outputs null instead of Object TextField. When I click again it outputs Object TextField. If I trace the number of children it gives me 2. So I don't know how it can be null.
I've got a flash document using AS3. It dynamically reads data from an XML file, and creates a bunch of single line textFields. Could be like this:
<XMLdata>
<Line>this is line 1</Line>
<Line>this is line 2</Line>
<Line>this is line 3</Line>
</XMLdata>
So, for each node, it would create a new TextField, and change the textField.y value so that they are "stacked" on top of each other. All this if fine, except that if you hae so many "lines" (or textfields) that the "stack" is taller than the Flash Document size. What I would like to do is have a scroll bar or something so you can scroll the stack of TextFields. Doesnt' even need to be a scroll bar. Maybe an arrow button at the bottom, and when you click on it, it scrolls down. One for up too.
I have a numerical stepper,and a user can click on a textfield, then click the up and down arrows on the stepper to change the font size,i then try and set the focus back to the textfield and put the caret at the end of the textfield, but the stepper keeps focus anyway.Here is the event handler for when the stepper value is changed.Get the textfield's current format, change the size, set the new format, then focus on the textfield and set the caret position, but the caret just stays inside the stepper.
Code:
private function handleChangeTextSize(e:Event):void
{
var tField:TextField = Main.LAST_FOCUSED_OBJECT;[code]....
I've had problems with other components too with the exact same focus issue and the only solution i've ever come up with is to set a timeout for like 100 milliseconds to set the focus back then and it works. another way to do this without the "hack"?
What I have is a dynamicly created row of movieClips. In which TextFields are added with text that's received from an Array. What I would like to be able to do is click on the movieClip that's visible and have the code understand I clicked array[3] for example and it will show the 4th array item in another textfield.
Current development: [URL]
and code:
Code:
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.Event;
[Code].....
I have two text fields and the user can use a button to underline text in either field. I have a listener on each field that keeps tracks of the last clicked in field.
public function setLastActiveTextField(event:FocusEvent):void { lastTextActiveField=event.currentTarget; trace(lastTextActiveField.name); }
[Code]....
lastActiveTextField is defined as an Object. When the highlight button is hit, it reports the correct the range, but I can't figure out how to send the formatting to the actual textfield without setting up another if (lastActiveTextField.name==field2) control. Also, stage.focus won't work because the object isn't really on the stage, I guess. There has to be a way to refer to the textField object.
My scene has a TextField object. I set up my TextField as DynamicText because I need to change it programmatically.
How do I prevent mouse cursor change to I-Beam form when it's above TextField? Also, user of my flash application is able to select text of this TextField using mouse cursor. I would like to disable this behavoiur too.
Have an Input textfield and write e.g. 123 in it (This is on frame 1).Then later in frame 3 I want that number to be shown in a Dynamic textfield.How do I do that?
View 0 RepliesEither I want code to duplicate a textfiled OR..
[Code]...
Either I want code to duplicate a textfiled OR... To do a textfield that that font outlines on
[Code]...