I use Flashdevelop as my IDE. It is defaulting to write void with a capital V which reads Void and is causing CS5 to throw an error.
View 2 RepliesI noticed that i can set a return type on a function to 'Void' aswell as 'void' and just wondered if there was and benefit of either?
View 3 RepliesCS4-AS3 Full screen browser error This is my preloader on the first frame.
Code:
stop();
this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, PL_LOADING);
function PL_LOADING(event:ProgressEvent):void {
var pcent:Number=event.bytesLoaded/event.bytesTotal*100;
[code]....
Errors:
Code:
1046: Type was not found or was not a compile-time constant: Void. - function stageResize():Void { - frame 2 line 10
Code:
Warning: 1058: Migration issue: The property _height is no longer supported. Use the DisplayObject.height property instead.- bg_ratio = bg_mc._width / bg_mc._height; - frame 2 line 6
I just don't get the difference when to use VOID or Not .. with so many tutorials I have read, some use void, and sometimes they don't within very similar circumstances ..
Code:
function onEnterFrame(Void):Void
{
}
//and
[Code]....
Simple question here, when void follows a function in AS3 what is it doing?
public function sayGoodbye():void {
trace("Goodbye from MySubClass");
}
What is the use of void in Action Script 3.0?
View 3 RepliesThis one has been puzzling me for ages... I've been using a lot of friends of ed books and noticed that a lot of them use the following:
[Code]...
im having this errors:
1021: Duplicate function definition function onComplete1(event:Event):void {
1021: Duplicate function definition function stopSound1(event:MouseEvent):void {
1021: Duplicate function definition function backSound1(event:MouseEvent):void {
codes i used:
Code:
var thereReq:URLRequest = new URLRequest("SOUNDS/how.mp3");
var there:Sound = new Sound();
var thereControl:SoundChannel = new SoundChannel();
[code]....
I am trying to link to a pdf and show,hide an under line when I roollover a button trough an external class call Plans. This is the error I am getting in line 45:
Warning: 3590: void used where a Boolean value was expected. The expression will be type coerced to Boolean.
My button is called fp_1 and the line is called line_fp_1.This is my code .as:
ActionScript Code:
package mlc
{
import flash.display.*;
[code]....
Today I've received a small ActionScript 3 application that I need to have a look at and make some changes to.I've noticed that the entire application is riddled with the return keyword, eg:
// Constructor
public function MyClass()
{
// some logic[code].....
Is there a possible reason for this, or is the developer who worked on this using some weird, self-taught practice?
I am making this interactive flash card, and dont have any problems so far, however, I get this error:
Location: Scene 1, Layer 'AS' {this is the layer I use for my actionscript}, Frame 1, Line 11
Description: Warning: 3553: Function value used where type void was expected. Possibly the parentheses () are missing after this function reference.
Source: roteren;
This is the piece of code its referring to:
function klokklik (evt:MouseEvent) {
draai = 0;
geklikt = 1;
roteren;
}
And roteren; refers to the function roteren:
function roteren (evt:Event) {<lots of code here>
}
I've started the OO Scrollbar tutorial part 1 and when i went to test the movie i got the following 1046 error on 14 lines
Code: Select all Tweener.as Line 861 1046: Type was not found or was not a compile-time constant: Void. I added the caurina file to a folder on my desktop as shown in the tutorial and added it to my preferences in flash but still no joy. i tried the following moving the caurina file to the folder holding my fla in the publish settings i added the class directory in the original folder i did on my desktop i moved the caurina file next to the com folder rather than under it i moved the caurina file to the adobe flash config folder when the folder was under com i changed the as file so it was Code: Select allclass com.caurina.transitions.Tweener { and did the same in my actions layer of the movie where is the best place to put it, do i have to change the coding in the as files....
[Code]....
I'm basically having the following error: 1067: Implicit coercion of a value of type void to an unrelated type Array. In relation to the event listener that calls 'Backdrop'. Backdrop is a public function in another class, but it does still recognise Backdrop as a function.
Code:
for (var i:int = 0; i < menuArray.length; i++) {
var currentIndex:MovieClip = this["menuButton" + i]
currentIndex.menuButtonTxt.text = menuArray[i];
[code]...
So when I did this the problem that I am having is that it throws an error at compile time. 1067: Implicit coercion of a value of type void to an unrelated type Function.
var result:int;
if(observerButton.selected == true)
result = assignMemberAsObserverToEvent(dataGrid.selectedItem.id_event,dataGrid2.selectedItem.id_person,assignmentDescription.text);
else if(adminButton == true)
[code]...
There is error on two assign function calls.
The error is: Description Resource Path Location Type
1067: Implicit coercion of a value of type void to an unrelated type int. AssignUser.mxml /pui2/src line 149 Flex Problem
Here their declarations:
protected function assignMemberAsAdministratorToEvent(id_person:String, id_event:String, description:String):void
{
assignMemberAsAdministratorToEventResult.token = actions.assignMemberAsAdministratorToEvent(id_person, id_event, description);
[code]...
Im confused, I passed a matrix datatype into the this.graphics.beginBitmapFill(); and i get Implicit coercion of a value of type. below is my code.
[Code]....
i am currently trying to learn ZendAMF, but i have a hard time troubleshooting which makes learning it quite hard. Is there a way to make the PHP file throw an exception that gets traced as an error message in AS3 (not Flex), the only error i seem to be able to get is "Error #2044: Unhandled NetStatusEvent:. level=error, code=NetConnection.Call.Failed", but it tells me jack ****.
i have gotten ZendAMF working, i just want to know how i can make error handling better, so that as an example can use PHP to tell flash that no results were found, or that the typed text was invalid. Is it better to use AS3 to check if the field was filled properly?
I was following this tutorial and getting this error message. I think I have the same the guy in the tutorial has, but I am getting an error message. Why? I have this in my AS: import fl.controls.*; The error reads: 1172: Definition fl.controls could not be found.
View 3 RepliesI am trying to load an External swf.
But it throws an error when I compile.[code]...
I get a Flex 3 sandbox error #2048 after connecting to a Socket on a Java (1.5) server. The server code is all mine, i.e. not running under Apache. Flash Player 10.0 r32.The sequence is as follows...
1 Java server starts, listens on port 843 for policy file request and on port 45455 for my other requests.
2 Flex client served by Apache (although I get the same result if I run it from the file system), socket connection made on host:45455.
3 Flash Player requests policy file from port 843. This is the standard behaviour with the new security settings looking for a master file. It happens regardless of whether a different policy file has been specified.
4 I serve the following XML from Java through port 843:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="*" to-ports="*" secure="false"/>
</cross-domain-policy>
5 The player writes the following into the debug policy log...
OK: Root-level SWF loaded: http://localhost/bst/BasicSocketTest.swf
OK: Searching for <allow-access-from> in policy files to authorize data loading from resource at xmlsocket://192.168.2.3:45455 by requestor from http://localhost/bst/BasicSocketTest.swf
OK: Policy file accepted: xmlsocket://192.168.2.3:843
OK: Request for resource at xmlsocket://192.168.2.3:45455 by requestor from http://localhost/bst/BasicSocketTest.swf is permitted due to policy file at xmlsocket://192.168.2.3:843
6 I send a text message from the client to the server on port 45455 using writeUTFBytes() and flush() (this is my own home-baked message protocol, and is correctly processed at each end)
REG/REGISTER;simon;Si
7 Java server thread listening on port 45455 responds with
REG:0/REGISTER:SUCCESS;simon;Si
8 The Flex client receives a ProgressEvent and the event listener I bound to the socket gets called. I process the message (write it to a text box on the screen)
9 The Flash player throws a 2048 sandbox error and the socket is disconnected! This is after the message is received and processed successfully. In fact it is about 12 seconds after. Nothing else works through the socket.
I have tried explicitly loading a policy file with a call to Security.loadPolicyFile() in the Flex client, but the reality of the new player security is that it is basically ignored. The steps are that the policy request will not get sent until a socket i/o operation occurs. At that point the player always goes to port 843 first looking for a master policy file. If it finds one, and it is permissive, it goes no further.
I have tried a variety of alternative ways of terminating the policy file and policy file contents, including deliberate errors just to see if the Flash Player is awake.I can see no reason why I would have a 2048 being thrown. I accurately serve a socket policy file on the designated master security port, which the player itself logs as correct. The socket then successfully sends and receives a message from the server the contents of which are available to my code.
P.S. Please don't tell me to use BlazeDS or LCDS or Granite, or something else as a server, I'm looking for a solution to this problem, not a redesign. And please don't ask me to use an XMLSocket instead - I tried that and get exactly the same result. I have chosen my architecture carefully and deliberately and I want a binary socket.
EDIT :In response to James Ward's request in his comment, here is the entire error message:
Error #2048: Security sandbox violation: http://localhost/bst/BasicSocketTest.swf cannot load data from 192.168.2.3:45455.
I have a stripped down test client which has a handler for each socket event and outputs a message to the screen. This is what it shows:
RequestPolicy: 192.168.2.3:843
Create Socket: 192.168.2.3:45455
Connect: [Event type="connect" bubbles=false cancelable=false eventPhase=2]
Sending: REG/REGISTER;simon.palmer@gmail.com;Si
Receiving: REG:0/REGISTER:SUCCESS;simon.palmer@gmail.com;Si/
Close: [Event type="close" bubbles=false cancelable=false eventPhase=2]
Error #2048: Security sandbox violation: http://localhost/bst/BasicSocketTest.swf cannot load data from 192.168.2.3:45455.
The close event is fired immediately after successfully receiving a response from the server, however the Error #2048 does not appear until about 20 seconds later. If I try and send a further message after close, but before the error, the Flash Player throws an invalid socket exception.
I am Using Flex as my client and java as my server. Using Weborb in remote host. At times I recieve this error.
faultCode:Client.Error.MessageSend
faultString:'Send failed'
faultDetail:'Channel.Connect.Failed error NetConnection.Call.BadVersion: :
[code].....
I have this code:
<script>
function cargar(url){
var iframe = $('<iframe>');[code]....
That generates an iframe (containing a panorama viewer with JavaScript and Flash) and inserts it in a div.The thing is that this code, in local, Firebug jumps:
Elemento referenciado por ID/NAME en el ámbito global. Use el estándar del W3C document.getElementById() en su lugar.Element referenced by ID / NAME in global scope. Use the W3C standard document.getElementById () instead.And online it doesn't jump any error or warning but the script doesn't fully work: http:[url]... (the controls are missing and the autoplay is not ON)
Environment: I am using Flash CS3 and targettting my application for Flash Player 9, I have installed Flash Player 10 on my machine. I am getting a flash player 10b.ocx error, which causes into crash of the browser. I am loading a bunch of images in this application. (20-30 at a time). using Loader class.
I have three questions: Is it the flash player error causing the browser to crash or something in my code is wrong?what possibly can go wrong in AS3 code to cause this error if it is not a flash player error?What could be the possible resolution for the same?
i managed to get my photogallery up and on my site but i'm having a problem. It loads a few of the pictures but then it quits working. After it quits working and i close the browser it gives me this error:
iexplore.exe - Application Error
The instruction at "0x10005f6c" referenced memory at "0x10005f6c". The memory could not be "read".
Click on OK to terminate the program You can go to [URL].. and try for yourself. Under the Pictures of Iraq page it should only load up till the 3rd picture. Anything after that and it quits working. Somebody please help me fix this.
I have tried to work my way through it.I can't understand why my button actions are causing an output error,the first two on this keyframe work just fine, but when I add the third it causes this error...
TypeError: Error #1009: Cannot access a property or method of a null object reference.at clear_fla::MainTimeline/frame86()
Here is the script
stop ();
function clickFunction(evt:MouseEvent):void {
gotoAndPlay(87, "Scene 1" );[code]........
Like I said, sg_btn and ak_btn work, but az causes the error...They are all on the same keyframe, dont know if that matters
I am a flash amateur. I have a movie clip in frame 1. The movie clip is a series of images that is similar to Apple's wait mouse cursor. I have written the following script hoping it will act as a preloader.
Code:
var total:Number = stage.loaderInfo.bytesTotal;
do {
var loaded:Number = stage.loaderInfo.bytesLoaded;
} while (loaded<total);
gotoAndPlay(3);
But, I get this error in the output window. Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds. All I can see is the preloader, but frame 3 is never loaded.
I am trying to use ZendAMF to do remote method calls to a MySQL database from Flash and I keep recieving the NetConnection.Call.BadVersion error.
My Server is working correctly. Apache 2.2.14
My PHP is working correctly. PHP 5.2.11
My Database is working. MySQL 5.0
My first problem was a security error in Flash. If you try to run a local SWF from the Flash IDE to a web service online, you'll get a security warning which will throw the BadVersion error. However, the security error won't show up if you 'TEST MOVIE' so it took me a while to realize that. I changed my testing process to remove this variable. I am now able to implement my php class code successfully using AMFPHP, which essentially rules out my class as the issue (I think). It seems to be a problem with the Zend implemntation of AMF.
I have followed a tutorial from Lee Brimlow here: [URL]. I was unable to get this to work locally, and I've moved my content onto a web server and can call the Class and Method from my SWF. I've used Charles to view the response. When I go to validate the response in Charles I get this:
Validator: Failed to Parse XML Document.
Reason: An invalid XML character (Unicode: 0x0) was found in the CDATA section.
Line: 65 Column: 87
Can it be handled in PHP?
Here is my ZendAMF code:
<?php
error_reporting(E_ALL|E_STRICT);
ini_set("display_errors", "on");
ini_set("include_path", "./frameworks");
require_once 'Zend/Amf/Server.php';
require_once 'Animal.php';
[Code] .....
I have a movie that loads swfs into a loader within and MC on the main file/stage. The code within the movie clip housing the loader is (NOTE: I worked up an simplified fruits/veggies example to work out issues, I am not a fruit/veggie expert or anything):
[Code]....
That repeats every time either button is clicked after that. NOTE: I tested this after removing the preloader code(and moving the frames around to remove the blank first frame) in the external swfs and it worked fine jumping back and forth between them. I have already plugged away at this solving a series of issues to get to this point and I have the feeling this is a pretty simple fix, but I am not sure whether I should be looking in the external swf file itself or in the loader code in the main file to solve it.
I have just added a menu screen to my game and I get the following error:
ActionScript Code:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at MyGame()
[code].....
I have downloaded a component using the duplicate symbol function, it works fine when published with Flash Player 7 but when I try to update it to Flash Player 8 and publish it produces this error message:[code]
View 3 Replies