Actionscript 3.0 :: SWFaddress / Swfobject In Full Browser?
Aug 19, 2010
i'm trying to implement the SWFaddress for a site and am having trouble getting the swfobject to work, i think because my site is full browser. i see the swfobject that is included at Asual is a quite a bit lengthier than previous ones. When I try to change the height and width to 100% (below) I get nothing in the browser.
Code: Select all <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]....
View 3 Replies
Similar Posts:
Mar 27, 2010
What size should be my flash website stage, so i can use the website in full screen (100%) [swfobject 2], in a way that it will be seen fine on any monitor size?
View 2 Replies
Aug 7, 2007
i have never been able to get this to work (most probably cuz it deals with css, and i suck at css - and i also hate it ).so i'd like to make a flash movie that fills the browser window and have elements placed onto the stage according to that size.i have read a post in the tutorial explaining a bit of things, but it does not cover all.
- how do i make a div height 100% of the browser window in css for ff?
- should i make the fla a certain size?
- why does firefox render the Stage.width and Stage.height differently than ie (im using ie6)
View 7 Replies
Apr 1, 2010
I am working in Flash CS3 and Actionscript 3.0 My application resizes according to browser width and height. If the user first resizes the browser and then loads the flash application, I could not get the full browser width untill the user goes for full screen. Is there any way around, to get the full browser width before the user goes for full screen.
View 1 Replies
Jan 22, 2009
I'm working on a small flash site and I want the swf file to have "bleed" or to go to the very end of the window so that the swf isn't just ploped over top of a background. [URL]
View 1 Replies
Jan 3, 2012
I have an SWFAddress plugged to my flex application, and all works perfectly, instead of Browser's Back Button.
When user presses it, no event dispatched.
View 2 Replies
Apr 8, 2009
I'm using swfaddress which creates a page title in the browser based on what page your on in the flash site. The title comes from the name of a frame label. For example i have a frame label called "About Us" I've capitalised it and put a space between the words because this text is what's used in the page title on the browser and i want it to look good and to be able to be read properly.When the page is refreshed it comes up as: "about%20us" as the page title on the browser.
View 3 Replies
Jul 19, 2008
I have SWFAddress going for the most part, but the browser's back and forward buttons aren't working properly. When I use the back and forward buttons, it successfully changes the URL but it seems the SWFAddressEvent.Change is not being fired in Flash. Everything I click within the .swf relies on this event and works great, but the browser buttons still won't.
View 9 Replies
Apr 14, 2005
I have a standalone Flash projector running off CD. Currently, I use
getURL("http:url....);
to open the page on default browser. Only problem is the browser window is opening at the size it was last used. I like to see it opens full screen.
View 2 Replies
May 8, 2007
[URL].. Anyone know the AS to make it automatically check the size of the browser for the listeners_notice when you resize the browser it works perfectly...but not when it first loads up.
[Code]...
View 11 Replies
Jun 22, 2009
The timeline swf itself (the core of the site) is being loaded into a wrapper swf, as one of the requirements is that this timeline can be used elsewhere, in other projects. This wrapper, however, will have some additional visuals that pertain to a stand-alone version of this timeline. As a result of never knowing exactly where this is going to be used (either a subchapter in another flash website, or as a stand-alone site by itself), I've decided to dump all of the swfAddress code into the wrapper, in a child class of it. To handle the navigation changes, I'm dispatching custom events (from the timeline) with parameters that describe the nav changes, which gets picked up by the parent wrapper, which then calls a function in the swfAddress child class for handling.
Also done in this swfAddress class is the parsing of the URL onChange event (when a browser back button button or history changes the nav, rather than a Flash button). This, too, dispatches an event with info about the parsed URL, which the wrapper is picking up and then calling a function in the timeline's API to make the necessary changes.
[Code]...
View 4 Replies
Feb 14, 2011
I'd made a flv video player. It's get variables from flashvars. Display wijth swfobject.embedswf in the browser. Sometime something wrong the player. I think, the AS is not runnung. I can see just the player graphics objects.
View 1 Replies
Feb 16, 2011
how to use SWFAddress within MCs? All the tutorials I find seem to use the maintimeline, but I need to know how to make it work within multilevel mc's, dynamicly loaded in. Ive got a working code but this one is static. Everything is working, even when i copy and paste the URL of Testpage 5 for example in the browser. how to create a dynamic way than using the switch statement.
[Code]...
View 1 Replies
Jul 27, 2010
I'm having a problem with the flash publish method and swfaddres.I've included the javascript of the flash pubblication in a new javascript file with the swfaddress in the same page.If i use swfobject for including my flash file in the swf, swfaddress works ok...if i include the swf with the flash method swfaddress doesn't work.Here the link: http:[url]......
View 0 Replies
Mar 26, 2010
With swfobject 2.2, how do you specify the desired version of flash you require? I need flash 10, but swfobject won't perform an upgrade install with the provided expressInstall. swf in the swfobject 2.2 distributable. How do I get an upgrade install to occur for flash 10?
View 1 Replies
Oct 5, 2009
It was designed in Flash MX 2004 on a mac. I need to make the site load full screen in the browser but with the content not to scale with the content to remain centered at all times if the screen size is larger than site. How do I do this? What publish settings does it need and do I use fscommand? Or does it need html code adjustment?
View 2 Replies
Apr 20, 2010
In AS2 I have a full browser flash setup with some centered movieClips.
I only want them to shrink (proportionally) if the browser window is 1024x768 or less.
View 1 Replies
Sep 14, 2009
I would like to create a html that would embed my swf without any borders in the browser.
I've tested embedding my swf but the excess graphics in the swf were shown at the side. Is there anyway i can solve it?
View 7 Replies
Feb 13, 2009
I've just followed the tutorial "Full browser flash" URL...I've got it setup so everything will be inside of the "centered" movieclip. view it here: URL...BUt I can't seem to get my preloader included in the centered movieclip.[code]Basic, but it works on the main timeline just not in movieclip. Something I need to change?
View 2 Replies
Aug 13, 2009
I've seen the Full Browser Flash video which has tiling in the background. Can somebody supply code, and possibly an example of how to have one scalable image as the background without distortion whilst the foreground flash remains the same size. the site below is exactly what i'm after with the menu fixed to the left.
[URL]
Is it also possible to have the menu bar a fixed percentage from the top of the browser?e.
View 2 Replies
Sep 25, 2009
In a nutshell here's my objective: I want to create a full browser flash video (not full screen mind you, just the browser window itself).I've imported the .f4v using the NetStream and NetConnection classes and set it to replay the moment the video reaches the end. Here's the code I've used:
Code: Select all//Create a NetConnection object
var nc:NetConnection = new NetConnection();
nc.connect(null); //if video resides locally or on my server pass null to the connect method[code].......
The problem I'm having is that I don't know how to center the original vid object on the stage.Currently, the video is being resized, but only the upper left portion is visible (example: http:url]....). As it stands the vid is being placed in the top left corner before being resized. In the tutorial he mentions aligning it with the tools in the align palette, which is not applicable in my case.
View 2 Replies
Dec 13, 2009
I want to display an image gallery that when clicked shows a video over top of the browser (like shadowbox)- full screen.I have tried full screen but I can't get rid of the message about using the esc button that flash player displays.
View 1 Replies
Apr 12, 2006
a couple issues I'd like to work out. I have taken the XML photgallery tutorial a step further by making it full browser (with images centered in the browser window). To make this possible, I've sunk the "picture" mc one level deeper into a "container" mc that is centered via actionscript.
So the code changed from: picture to _root.container.picture
Problem is, the registration point for the loaded images is top left. Since some of the images are different sizes, I'd like the registration point to be dead center. How would I do this? Actionscript follows (it's a lot, my apologies).
Side note: Why is the fade-in script so poorly written? Is there a way to make the fades smooth? It works ok when on local drive, but I'm assuming that the delay introduced by an image being accessed on the server makes some of the fades very sudden and ineffective. Any idea how to force the alpha fade to wait until the image has fully loaded?
[Code]...
View 6 Replies
Jul 31, 2007
I want want to create a gallery where the images fill up the entire Browser window. Here is what I got so far:
PHP Code:
Stage.scaleMode = "noScale";
Stage.align = "TL";
import flash.display.*;
stop();var sl:Object = new Object();sl.onResize = function() {
[Code] .....
How can I use an XML file to get the images from?
View 14 Replies
Apr 22, 2010
problem regarding xml flash gallery and as 2.0. I have created a xml photo gallery from Kirupa ([URL]) I want to create a gallery where the images from the .xml fill the entire screen and scales proportionally. To achieve this I have followed this tutorial: [URL] As long as I can center the content of the mc center to stage this works fine, but when I create an empty movie clip and try to load external content from the xml file to the mc (instance name = picture) the images does not behave as espexted. It looks as if the TL corner of the jpg images are aligned TL in relation to the MC. Also the image rotates 90degrees clockwise. A final problem is that this test:
[Code]...
View 1 Replies
Nov 21, 2009
I am making full browser page, but resize doesnt work well. It looks like the flash took wrong stageWidth and stageHeight at the start... Then it all works but with wrong numbers [URL] (when you launch swf in standalone player, it works well - download [URL]
[Code]....
View 1 Replies
Feb 4, 2010
I was checking out flash templates looking for inspiration, when I ran across this template.If you open the link, you'll see a button on the right side of the flash file which allows for full screen display. There are no browser elements visible at all.
View 1 Replies
May 1, 2009
I'm learning AS3 and Flash CS4 right now and I'm trying to do what I have been doing in AS2 for years and I'm having some problems I'm trying to make a Full-Browser Flash site and upon resizing the screen I get an error #1009.I am able to to resize the mc's on the screen without a problem, but once I add simple interactivity, I get an error upon resizing the window.To duplicate this problem,I'm sure I'm doing something very stupid, but I just don't know what I'm doing wrong.
View 5 Replies
Oct 17, 2010
I want to develop a flash website. I have some background images. I want them to be filled the whole screen and also in center while seeing in the browser. I am able to make it into the whole screen. But while resizing the browser it is not holding into the center.
View 2 Replies
Feb 16, 2012
My flash program isn't using the full browser window, even while in full-screen mode. It uses the full height but not the full width. I end up with a large chunk of white space. I have the following code for full-screen mode:
[Code]....
So the problem is that the stage's width isn't the full size of the browser. I'm using Flash Builder 4.6 is there a way to set the stage's parameters to allow for true full-screen?
View 1 Replies
