On frame 2 of my main timeline, I have a movieclip called "intro". Within "intro" I have all of my intro animations. When these animations end, I want to jump to a page I've labeled "homepage." On the last frame (frame #125) of the "intro" movieclip, my as3 simply says:
[Code]...
I am making a small website out of flash and I have a photo gallery in a separate scene. I have five photo galleries and so I have five buttons that will lead to those five galleries.
The code of one of the five buttons is
on (release) {
_root.gotoAndPlay("Content_Photography");
}
Works great, but the first 10 frames of this new scene "Content_Photography" is an intro and then I would like that it would jump to the corresponding gallery that these galleries will be laid out on the timeline.
What would i put after _root.gotoAndPlay("Content_Photography");?
I have a flash header for an html site that is about a megabyte and obviously needs a preloader. Unfortunately it won't work to have the preloader loading at the top while the rest of the html below is visible — it will end up looking like the top navigation is cut off, as the top 10 pixels of the nav bar is actually in the swf header (fully loaded it will look contiguous)Is there a way to preload it in one html page and then once it's loaded into the cache automatically jump to the page with the big swf?
View 1 RepliesI have checked over and over again. But when I run it, it always skips the first two currentFrame if conditionals and runs the last currentFrame if conditional. I have this code in another file and it works perfectly...
[Code]....
I am trying to get a FLA to work correctly. I have 4 movies that I want to play with a navigation swapping the movies to the front as clicked. When I use the navigation, the first few movies work great, but as I click through they start to get a little jumbled, and it breaks. I am using this script for the buttons to call on the movies:
[Code]....
I have an intro movie. I want my homepage to automatically load after the movie is done playing. What actionscript do I need?
View 3 Repliesget the code on how to link a flash file to a specified paragraph in web page. I know how to link to a URL but not to a specified location.
View 4 RepliesI have a HTML stageholder, this calls a "mainMenu.swf" which essentially controls my site. This "mainMenu.swf" has three buttons: intro, portfolio and contact which are all individual movies. So far, all good... When I have clicked into the portfolio section a 3x3 grid loads with nine buttons, one of these buttons loads a preview page for four movies, when I load one of these movies it plays fine. What is the path to get the loadMovie command to jump back to the 3x3 grid page from this movie? Basically, what is the command to jump up a directory when using loadMovie?
[Code]....
I'm working on a friends site - Lorenshaw.net using CS3 and all of the code for the buttons is pointing to the right scenes yet it goes to the wrong scenes. Does anyone know what the problem could be? I also have some stop actions at the end of each scene. For buttons I'm using On release, gotoAndPlay "Scene, frame number"
View 1 RepliesBasically i have two SWFs on my page, one of them has a button which i want to affect the SWF to the right of the page. So when you click the button, it simply goes to and plays from a frame in the second swf!
View 7 RepliesI have an html page with an .swf in it.when this page loads, i want it to play a certain section in my swf (which I have labelled).Is there a way for me to do this? using javascript?i.e. <body onload=( gotoandPlay (starthere) )
View 1 RepliesI have created what looks like a book in flash.There is a corner turned over at the top right so when you click it the page turns. This is fine, however, what i want to beable to do is when I click it the page turns and goes to a new page. ( i have made all the other pages)I tried an on(release) but it just doesnt go to the page, it plays the movie clip but I cant get it to navigate aswell..
View 14 RepliesCan anyone tell me the script for navigating from one frame to another? I'm developing a web site in Flash CS4 and haven't yet adjusted.
View 4 RepliesI have uploaded a movie, great, no problem but. it is hiding the navigation menu on the page.
View 1 Repliesi have an swf file to cause a page curl when i click a different link in my site, but as of now it is a blank curl over the page i navigate to. i want to make the current page curl revealing the 1 i am navigating to. how would i go about this?
View 5 RepliesFrom this example image attached, I have created many instances on my stage, let's say that for each instance I would like to go to a new section that has a different layout. What is the action script that will move my frame to the right location for example, let's say on one of the instance I have a button that says contact. On one of the buttons, what action script to I have to put in so that it navigates there when someone press it, I would think "on press" go to instance tab contact something of that nature.
View 3 RepliesI have a Flash MX navigation on an html page and I want to set up the buttons so that onRelease they will go to named sections on that html page; Thru the use of the <A NAME></A> <A HREF></A> tags.
View 2 RepliesI want to highlight the current page in my navigation.
I have the code below (duplicated for each button on the page) which changes the colour of the text in the nav when you rollover and then back when you rollout. I'd like to have the text stay on the rollover colour if it is the current page.
I've been messing around with variables and have added the bit onto the onRelease function which displays the "page" variable in a dynamic text box. This works fine, but I'm now stuck on how to use this variable, everything I've tried hasn't worked.
I can understand the principle of what I want to do as I can do it in PHP or CSS. I need some kind of conditional statement, for example (in laymans terms):
if page equals 1 then make text colour red or if page equals 2 then make text colour red and so on...
Code:
var up = "0xC5B9B3";
var over = "0xC6006F";
_root.nav.button_1.onRollOut = function() {
[Code]....
I am brand new to scripting in Flash, and was hoping I could get some help on a question. I have an animation that is 300 frames long. The first 100 frames are an animated 'ad' (for lack of a better term), the second 100 frames are a different ad, and the third 100 frames are the last ad. This can be viewed straight from beginning to end (and is intended to loop if no action is taken), but I would also like to add some functionality to the animation, so that people can jump forward to the next ad, or back to the previous ad (hitting back from the first ad would take them to the third ad, and vice versa.)
[Code]...
This does not turn up any errors when I test the movie, but the functionality does not work. Am I anywhere near a working script, or am I attempting this in a completely wrong way?
I am working on a project that I need to create a flash navigation bar for a html site. There will be a drop down menu when you rollover the buttons on the nav bar, which means the drop down menu will be overlaying on top of the html pages. I saw websites were done like this before, but I personally don't know how to do it.
View 1 RepliesI am using the following code for my Navigation in a FLash CS4 file:
stop ();
function buttons(event:MouseEvent):void{
gotoAndStop(event.target.name);
}
home.addEventListener(MouseEvent.CLICK,buttons);
services.addEventListener(MouseEvent.CLICK,buttons);
about.addEventListener(MouseEvent.CLICK,buttons);
contact.addEventListener(MouseEvent.CLICK,buttons);
It works great when I am on the home page, but stops working once I navigate to any of the other pages. I have an Actions layer and that layer extends the full length of all pages/frames of the timeline.
I have the frames labeled as such: home, services, about, and contact. (All are "Type:Name")
each button is named as such: home/ instance of "home", services/instance of "services", etc.
I'm attempting to recreate some flash transition effects with html/ajax. How feasible is it to do a full-page cross-fade?
View 1 RepliesI made a thumbnails slide, works great, but here the questions. I need the thumbnails to navigation on my home page .. ( go the next page 1.2.3 etc.)
Script code on the thumbnails:
on(release){
photosMC.gotoAndPlay("img2h")
}
I have 2 versions of the same code, both to make 3 simple buttons work to move the timeline to a keyframe to change the page for user navigation. What is the difference? Is one way better than the other?
HTML Code:
stop();
var button1:SimpleButton;
var button2:SimpleButton;
var button3:SimpleButton;
function handleCLICK( pEvent:MouseEvent):void {
[Code] .....
i have a flash banner with navigation and want the flash to keep track of what page the user is on in order to give the user some kind of indication of where they are.ALSO i want the banner to animate / do some stuff ONLY on first visit to the site, i.e. if they navigate away from the site or close their browser window i want some kind of variable to reset so it will replay the animation on next visit.
View 1 Repliesi always see some fancy/complex/elements got random motion: flash home page navigation, such as [URL] I just wondering is it very complex/hard to make one? & How can a newbi, like me get started to make one? does it involve complex/advanced actionscript?
View 1 RepliesWe are developing a dynamic image slide show which display images dynamically from XML data. We need display the numbers like (1 2 3 4 5 ) from the xml file as per the number of records for images with hyperlinks to their corresponding images. (We also need to display 10 numbers at a time )
View 1 RepliesHow can I mention in the actionscript 3 that the movie clip on frame no. 10 should play after the webpage loads (or after 1 minute)? then stops? The code would be on Frame no. 1.
View 3 RepliesI am trying to create a dropdown menu from the top of my home page for navigation similar to this site.I'm just having a little difficulty on the correct process.Not sure if I make a movie clip for the bar to drop down when rolled over and how to place the text buttons so they appear when the bar drops down.
View 1 RepliesI am trying to build a page transition in Flash. The way I have it set up right now is as follows:
1) I have a movieClip with the transition animation.
2) I have two buttons, both MovieClips. And the actions layer of my timeline is scripted as follows:
Code:
stop();
mybutton1.onRelease=function(){
navVar="firstpage"
_root.transitionClip.play();
} mybutton2.onRelease=function(){
navVar="secondpage"
_root.transitionClip.play();
}
3) The last from of my Transiition movieClip I have this code:
Code:
stop()
if(navVar=="firstpage"){
_root.gotoAndPlay(navVar);
}else if(navVar=="secondpage"){
_root.gotoAndPlay(navVar);
}
When I click on the buttons, they are loading the transitionClip movieClip. But they are not moving to the correct framelabel after they hit the last frame of that movieClip.