Actionscript 3.0 :: Include Video Inside A Projector?
Nov 20, 2009
i'm a relative newbie to actionscript and flash in general, but do have some basic knowledge. and i'm having a problem with creating a flash projector. i've created a projector that plays and loops a video for use on multiple kiosks. easy enough. the problem i'm having, though, is that i would like to embed the video in the projector so that there's only one file to transfer to all the kiosks. as i have it right now i would need to transfer both the projector.app file AND my .f4v... but i'd like include the .f4v in the projector.
i open up .fla file, but when i click window->action, there is not actionscript inside it. may i know where else can i check the .fla file is importing .as file. where to check it in flash cs3?
At the beginning of my Flash game, I do some fairly heavy-duty calculations to figure out path-finding and visibility and that sort of thing. The result of the calculations are a few large Arrays and a Tree datastructure. It takes about 10 seconds on my computer. Is there a way I can do this calculation once and for all, and then just package up the final datastructures right in the the SWF, so that no one ever has to do the calculations again?
My project is made from multiple SWF files. I'm able to create .app from the main SWF file. Is it possible to put the related files into the .app directory structure? Where should be placed? Into .app/Contents/Resources/? Would it be possible to access these files using some relative path to this location from the main SWF?
I am currently working to a Role-Playing Game in Adobe Flash CS3 with ActionScript 2. I must include doors inside rooms, but when I do that, my player dissapears. I use this code:
Code: ... for (var i = 0; i<mapHeight; ++i) { for (var j = 0; j<mapWidth; ++j) { this.attachMovie("tile","t_"+i+"_"+j,++d);[code].....
I have a M4V video file embedded in a Flash movie, and I need to play the Flash movie at full screen using the Macintosh Projector format. When the Flash file is done in Actionscript 2, everything appears as it should, but if the Flash file is done in Actionscript 3 (which this particular needs, since it uses armatures), then the video fills up the whole screen and hides everything else. I figured out how to prevent the video from scaling to fit the screen (set the scaleMode parameter to "noScale"), but it still shows the video in the center of a black screen. How can I get it to stop messing with the file and just play the @#$! video where I put it?
I need to have a fullscreen AS3 projector to open a video within the presentation to fullscreen and then back to its original size. The video is inside another movie clip and doesn't use the FLVPlayer component. There is also a custom video controller that needs to be positioned under the video when viewed fullscreen and then return under the original video. I have had some success opening the fullscreen video but could not position the video or controller position accurately.
Problem is that I want to have small video players in this full screen Projector, but I DO NOT want the videos to display full screen. I want the videos to display at their preferred size. However, since the stage mode is full screen, the video automatically goes to full screen as well.How do I prevent this?
I used AS3 to successfully load a web-hosted video file when I tested my app. within Flash CS5. However, I published as a Windows projector EXE file and the web-hosted video won't load from within Flash Player 10 running the EXE.
I have an issue with video. I have a full screen projector running Flash Player 10.1. I call the video with this code: function fbtnclickj(e:MouseEvent):void{ var loadera = new Loader(); addChild(loadera); loadera.load(new URLRequest("videos/video1a.swf")); } The videofile (video1a.swf) uses the Flash FLV Playback component 2.5 (size 320 x 240) and the source movie is external (video1a.flv). The videoloads and runs fine but enters in full screen despite I have configure the component to exactFit. Any way to make it stay to 320x240?
I am using an include file, and I've noticed that sometimes the the fla file does not refresh new changes to my include file. When exporting with "Ctrl, Enter" Is Flash loading the include file from the cache?
I am creating a full screen projector with flash CS4. In the projector I have more videos, starting from an swf player-
The problem I encounter is this:
The projector starts correctly FULLSCREEN (using AS). The video plays 900x506 correctly. If I click on the player, to get the video full screen, it works. But when I press ESC, not only the video, but also the PROJECTOR looses full screen.
This is a bit annoying. Is there a way to apply the "back to normal size" only to the video? I do not want to prevent the app to be exited from full screen, it's not a problem if the user wants to exit the projector full screen. But not when the user exits the video from fullscreen mode.
[URL]First field name, second field email and third field mobile no please enter it the click on the Verstuur button. Then the video plays which shows your name in the card and mobile .How can we pass custom variable like that in flash video in actionscript.
I have this piece of code to put a FLV in my flash movie which works fine until I put the video player inside a movie clip. I can hear the video but can not see the thing?
var nc:NetConnection = new NetConnection(); nc.connect(null); var ns:NetStream = new NetStream(nc);
I'm working with several videos each inside their own movieclips. When I click my forward button to jump to the next video I get the second video playing over the first one especially towards the end part of the first video. I can play and stop the movies just fine but it's the gotoAndPlay that's causing me problems right now with forwarding and rewinding clips.
Hope my explanation was clear cause I'm just starting out with AS3
I am trying to set up Adobe Media Server to stream to HTML5 pages too... It's working with Flash, with NetStream, but I need it with HTML5, to work in iPad/iPhone phones...
I get AmazonCloud and ordered Adobe Media Server, and there I found location to f4m file...
I replaced title with my stream name and I get output like this:
So I have this flash site, I have a video placeholder in it, that directs to a .flv outside flash, everything works perfectly. But now I want a button, and that when I press it, it goes to the next video. So this is the code I have so far.
ActionScript Code: stop(); var nc:NetConnection = new NetConnection();
I have four buttons currently set up to do all sorts of stuff in a flash file. What I'd like to do is have them all point to the currently displayed movie clip on my main timeline.
At the moment they're set up to test the addChild and removeChild functionality I've written and it seems ok. I would like to trigger removeChild and addChild by the last frame in a movie clip and have my buttons send a play command to my movie clip. That way the clip plays to the end before removing itself and adding a new movie clip.
The movie clip that I would like to trigger the addChild and removeChild functions is actually one of four movie clips so I need to declare play(); and send it to the current movie clip regardless of which one is on the stage. I was thinking about declaring a variable to contain my movie clip so that I can just say play(awesomeMovieClipVariable); and awesomeMovieClipVariable will be equal to the currently loaded movie Clip. how to declare a variable and send my movieClip in to the variable.
I have added frame labels to the final frame of each instance of mc_copy1 mc_copy2 and mc_copy3 to allow a conditional statement something like... if (current frame of that movie clip = frame label) but I don't know how to set that up..
I have a movie clip that needs to loop inside a movie clip in Flash. Would someone post the code to paste into the ActionScript window? The .flv has no skin on it. I have done this so that I can put the video file outside of the Flash movie.
I am loading a h.264 mp4 video (quite big, 2048 x 768) into a flv player. When I test it inside flash (Ctrl + Enter), the video runs really smooth. However, when I publish my .exe (or even a .swf, although I need the .exe),
I'm editing a flash site that needs a multi video player. I've already added a few other features to the site, so know the drill now... This video player just doesn't load the external files to it. I'm doing exactly the same thing I did with the other elements, but this doesn't seem to want to work. I've triple checked the spelling of 'config.xml' and even tried changing the action script settings to frame 2, which just makes all the preloaders spin around!
I have a site I've added a few new modules to, but the video player module just doesn't want to play at all All the components load when I test the movie but none of the external data loads, and when I test the scene with all components on its own it works fine.I've tried a few things but, still can't get this to work, and I've even tried downloading another multi video player and it did the same thing, I don't know where I'm going wrong It's all contained in a movieclip called 'bsv' and as I said works fine when I do test scene or be able to take a look at the site if I were to upload it?
I'm about to embark on a rather large Flash project that will involve a lot of streaming video.Most of the videos are short (about 4 seconds) but some will be longer, up to a couple of minutes.The videos will be hosted on an Adobe Scene7 server, which allows for resolution and encoding-type to be set in the stream request (amazing technology that I hadn't heard of until this project!).[code]...
I create a video in Flash using import->video. I select my .flv file and a skin.The .flv is on my hard drive. The component parameters reflects this location.I want to upload the video to my web server to display on my MovableType blog.
If I change the properties in Flash to reflect the server location Flash says "could not upload video." So I kept the component property to reflect the location on my C drive.I import that Flash media into dreamweaver to get the HTML code for my site.It works fine when I preview in Dreamweaver.I thought I could then change the code to reflect the new location of the file.I have done this using an online embedding program, but then I have no skin or ability for user to control playback.So I can get the video to the web with an online embedder,but the code generated by Dreamweaver does not work. The frame for the video appears, but there is no content.
I'm building an iPad 2 app with Flash with ActionScript 3 (Adobe CS5.5), what I want to do is to wrap my two sections of the video (h264) inside the final app?To clarify, I do not want to stream the video or load it external, "I need it to be included in the app locally" (inside the final package)!I need it to be in one application, to upload to the iTunes Store/Google market...PS like to do the same with Android, the package (apk) no stream video.
