I have installed FMS 3.5 on an Intranet server, and it installs its own version of Apache.This has now caused the localhost to open the FMS page. Disabling FMS 3.5 returns back to the Localhost page.It is not possible to run FMS 3.5 on an existing Webserver with Apache?
View 1 RepliesI downloaded OSMF Sample player and opened osmf.html, (C:playerosmf.html)it worked perfectly without any problem.The same file when I deployed onto tomcat server,[URL] I get the error "The specified capability is not currently supported" while debugging.
View 2 RepliesI have installed FMS 3.5 on a Linux root server with openSUSE 10.3 without included Apache 2.2. That is why the webserver is already installed and running. Now I should know next steps to configure both FMS and Apache to make it work for streaming recorded .flv files via HTTP and the VOD application. Starting Apache manually after FMS server is running always ends up in failure and error message: 'Address already in use. Could not bind to address [::]:80. If I start Apache first and then FMS server everything is running. But I guess this is not correct because the manual mentioned first starting FMS server.
View 21 RepliesI think I'm getting closer to the source of my problem.Let me outline my setup first (I'm using private IPs for example only). I have set two IP addresses to one network adaptor as follows:
CentOS 5.3 server running Apache 2.2.3 on eth0 with IP 192.168.0.78 <- working fine absolutely no problems at all
FMS 3.5.2 running Apache bundled with FMS on eth0:2 with IP 192.168.0.79
In fms.ini I have the following config:
ADAPTOR.HOSTPORT = 192.168.0.79:1935,80
HTTPPROXY.HOST = 192.168.0.79:8134
At (apparently) random times, the FMS Apache stops serving requests, but does not crash, and for some reason blocks requests to RTMP at the same time. Nothing appears in the log files which makes this even more tricky.I've run a test by shutting down apache as follows:
./httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k stop
and I expected RTMP to stop working aswell, however it continued serving up RTMP, which has led me to believe that something is then stalling the serving up of RTMP requests. This results in total downtime of all applications.
This is driving me nuts and because it's a combination of various technologies together I have a hard time tracking the problem. I wrote a tiny HTTP server that serves .flv files; these flv files are encoded on the spot. The flv files are encoded with adobe's screencodec (I started with libflv but that was too buggy so I ended up implementing my own flv encoder). For the problem below it doesn't matter which codec I use or if I serve plain flv files instead of on-the-spot generated ones (the problem also occurs if I just send 12 h264 encoded files).
I also have a swf that I coded in as3. The as3 opens 12 connections to my server and requests 12 different flv's and just displays them as 12 different videos on the page. I tested the setup with Firefox and chrome and am using the latest flash client (version 10). The HTTP server is pseudo streaming those files; e.g. it tells the client the file is of mime type video/x-flv, tells the filesize is 2GB and just starts streaming. For sake of completeness here's a header it generates:
[Code]....
FMS 4.5.1 Windows 2008 SP2 (64bit).We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:[URL] (does not load externally).[URL] (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):[URL]FMS does not stream Quicktime H.264 files even though f4v files work.New server (does not work): [URL]Old server (Quicktime/H.264 file works):[URL]Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:Apache's erro_log file: a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1: [URL]1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address.
In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
[code]....
I installed the FMS 4.5 on a debian system already running an apache web server. I configured the httpd.conf as mentioned in d6093a7e2f8312a374a1bde-8000.html but when i call a streaming url e.g. http://<IP>/hls-live/livepkgr/_definst_/liveevent/livestream.m3u8 the request is still handled by the old apache, not by the FMS
View 9 RepliesI have some movie clips that hold the contents. (ie I have a movie clip to hold my navigation buttons and another to hold the actual content.) I wrote some action script on a separate layer that is outside of the movie clips, the AS adds event listeners and a few simple functions. All my navigational buttons work prefectly, I have a button that I use for email, this works the first the frame is loaded. If I go to another frame (another page of the website), and then go back, the button no longer works, I tested with just using trace("the email button was clicked"); oh, I thought I might add that each page of the website is a different frame, that is inside my content movie clip. my AS looks like this:
stop();
navigation_mc.home_btn.addEventListener(MouseEvent .CLICK, homeClickF);
navigation_mc.rates_btn.addEventListener(MouseEven t.CLICK, ratesClickF);
[code].....
I updated FlashPro from 10.0 to 10.0.2 through the adobe updater.After the update applied, Flash ignores any code entered on my action layers as if it were not there, even simple stop(); command.
View 2 RepliesI have a Flash Animation which i am running in a Browser Window .. Suppose a Man moving from Left to Right and also a BackGround MusicNow when I change the browser Tab to suppose check my gmail account while the man completes his walk from Left to Right .. The problem is the music is running but the man freezes at his place and continues his animation only after i return to the Flash animation containing browser Tab.
View 2 Replies1 main flash movie called game.swf 1 external flash movie called maze.swf
The thing is from my main movie game.swf I load the external "maze.swf" true the LoadClip procedure. This works "fine".
The maze.swf as you can guess contains a maze game, and as you all will know this works with the Hittest commando to check if the character doesn't walk up against the wall.
If I start the maze.swf as a stand-a-lone this works fine, but as soon as I load maze.swf in my main movie. The hittest doesn't work anymore, because in some way the hittest is now checking with the coordinates of the entire main movie instead of only the boundaries of the maze.
I checked If I was calling to the right path, with _root and _level0 and etc. This is al correct because I can trace all the properties from maze.swf in my main movie. But the hittest simply won't work.
I'm trying to set up an app that moves one movie clip to the top of the screen, regardless of where it is or how deeply it is nested. To do this, I take the full path of the movie clip and go in, movie clip by movie clip, putting the depth of each nested clip on top. This part works perfectly. Afterwards, I want to move everything back to where it was. In the first step, I store the current depths of everything in an array before changing depths. In the second step, I'm trying to change everything back to its original depth, as shown in the array.
The code is below:
_global.videoPath = _root.clip1.clip2;
var pathString = String(_global.videoPath);
var videoPathArray = pathString.split(".");
var depthArray:Array = new Array();
[Code] .....
I imported a .aif sound in to my library and gave it a class name of "Beat". I'm using this sound as a rollover effect. So I have my variable initiated at the top like so:
Code:
var snd:Beat= new Beat();
My listener's function like so:
[code].....
When creating a dropdown for a button, I noticed the dropdown will stop working if the button does not run the entire length of the timeline. i.e.: if you navigate to a page that is out of that button's "range" it will stop working unless reset by returning to the root page. Nesting the problematic button in a movie, however, solves this problem...
View 3 RepliesThe following code is from the CS3 Language Reference.Pasted into a new file it works.Pasted into my current project it doesn't.what settings I might have that are disabling it?
this.createTextField("news_txt", this.getNextHighestDepth(), 10, 10, 320, 240);news_txt.border = true;news_txt.wordWrap = true;news_txt.multiline = true;news_txt.text = "To see the custom context menu item, right click (PC) or ";news_txt.text += "control [code]....
I've tried it on several different copies on Flash(on college computers and at home) with different files and no matter what, once I save the file, any action script I had will stop working and will never work again no matter what.
When I create a new document and put in some Actionscript (3), it will work at first. For example if I have one line telling an object to have a lower alpha. Then, consistantly, when I go to "save" it'll stop working.
I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.[code]...
View 7 RepliesMy friend and I have been working on a game for about a year. There's a few buttons on the stage that have been on the stage for six months, and always worked fine, but today my friend moved them and I just realized they don't work anymore. They are literally completely unresponsive to all mouse input, they have event listeners for mouseover and click but the events never get triggered (I checked for sure with breakpoints and traces).
I tried the obvious things first; move the buttons to the top layer and set .mouseEnabled = true, but that didn't do anything. I tried moving them around the stage in case something invisible was covering them but that didn't work.
We've got one button instance named "btnSell" that is broken, and another named "btnMenu" that works. They are instances of different objects in the library, but I tried swapping their instance names on the stage; then "btnMenu" was broken and "btnSell" worked.
So I swapped the names back, deleted the broken "btnSell" and created a new instance from the library. Only, it still doesn't work.
My friend deleted a bunch of old and no-longer-used assets, including previous versions of the PNGs that make up those buttons, so maybe that's related to the problem?
I made a flash file with buttons that go here and there and everything was fine except it takes a while to load so i added a preloader and suddenly the compiler is throwing the following error:
[Code]...
I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.
I have the following code :
var frontTemp:DisplayObject = this.animationInstance.getChildByName("front");
var backTemp:DisplayObject = this.animationInstance.getChildByName("back");
this.animationInstance.swapChildren(frontTemp,backTemp);
this.animationInstance.gotoAndPlay("animation");
it's a little ridiculous; and probably unbelievable, but when I have more than five hundred lines of actionscript in tags in my MXML FLEX Main.mxml, all syntax highlighting, error and syntax verification, error reporting, "Problems" pane, and even sometimes compilation fail. Upon removing any chunk of code, it works again.I don't see why Adobe could release a product such as Flash Builder 4.5 Premium, have this big of a problem; and nobody notice. Therefore I believe the problem has to do with my computer, or my project; as there's now ay more people have had this happen if I can't even find it on Google.
Additionally, many objects that have been defined in the MXML properties above the code, even those in All States, are now showing as warning: Access of undefined property down the side of my document. However, these warnings are not showing up in the "Problems pane", and aren't even yellow squigly underlining the right sections of code to pertain to the message.Steps I have taken to TRY and fix this:I have tried restarting, as well as re-installing the IDE (Adobe Flash Builder 4.5).I have tried creating a new projectI have tried splitting my code into smaller .as files and including them.I have tried compiling my application.
In my current flash application I and my co-workers are using Loader to load some SWFs from our server. It works perfectly while we have the flash application on our computers running it trough Adobe Flash CS3 but when we publish it and move the html page to our server and try and run it from there the loading doesn't seem to start. I have the firebug plugin for Firefox so I checked if flash actually loaded the images and according to firebugs network monitor it found all needed resources and downloaded them successfully. But the behaviour of our application is as if the loading starts but the complete event is never sent.
View 3 RepliesI have this piece of script:
function dataImporting(target, type, path)
{
if(type == "IMAGE")
{
[Code].....
This function is suppose to deal with loading requests from different kind of movieclips throughout the movie. There is something wrong with 'load(path as URLRequest)'. It compiles fine, but upon running flash simply crashes over and over (flash stopped working). It seems as if there is something wrong with it but flash not being able to catch the error.
The path is given as an argument to the function in the form of a string, but should be converted to a URLRequest before being able to be loaded.
I have a problem getting my flash to resize when changing the size of the browser window. It behaves perfectly from the beginning but when i resize the window to less then the minimum movie height to get a scroll (620 px) the Stage.height never changes to bigger than 620 px if I enlarger the window. It seams as if the flash don�t get information that the browser window changes...
This is my code in flash:
var movieWidth = 1000;
var movieHeight = 620;
[code].....
I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working
I have the following code :
var frontTemp: DisplayObject = this.animationInstance.getChildByName("front");
var backTemp: DisplayObject = this.animationInstance.getChildByName("back");
[code]......
I have a flash app that I have been working on for 5 months or so, it relies heavily on Flash remoting with numerous custom classes each making service calls via AMF.I have been developing this app in CS4 on Windows and never had any trouble, it works great.I just got CS4 for my Mac and installed it and copied over the flash files for this app so I can continue working on it on the mac instead of the PC, but on the Mac the app stops working after a few seconds, particularly after doing a few commands that issue flash remoting calls.Even stranger is it will not return to working condition again until I close all of the files involved with the project( the .fla and all .as files involved) and then reload them,if I keep trying to test run the movie from the flash editor it hangs at the first flash remoting call and never returns any error message or any indication that its trying to connect, on the server end my logs show no requests are going to gateway.php.So basically to continue working on the mac I'd have to keep closing down the files every few mins and reloading them.
View 3 RepliesIts set to print a mc that sits off screen with dynamically generated text within. This all works perfectly when i test the movie within flash, it prints perfect. However, when i publish the swf it stops working, instead it prints the corner of the offscreen content.
View 1 RepliesI am developing a website completely on Flash, it has an option for Fullscreen as well as keyboard navigation to switch between slides. On windows, when i do fullscreen, everything works fine. On Mac machines, after full-screen the keyboard navigation script stops working. This is the script I am using for keyboard action. Is there any particular script for Macs too ?
on (keyPress "<Right>") {_parent.gotoAndStop(2);}
Im working on something it coming right a long, but i think i did something wrong. I have a script see buttom, but is stops working after 3 or 4 clicks, the thing is that the bar is supposed to slide if you click on it end if ther is a bar in the way its going to take that with him.
[Code]...
I've been really frustrated with the code hinting in CS5. It doesn't seem to work like it should. It appears to work fine if I am placing the code on the timeline, but if I create a class file I lose the class code hinting even for simple types like Boolean. The other thing I noticed is after the class file has been created even if I go back to the code on the timeline it has now lost code hinting. The only way to get them back is to close the fla I was working and close flash itself.how to resolve this or is this a legitimate bug? If others have seen this happen please post so that we can get some attention brought to this. It seems to work fine if you create flex components and then edit them in Flash Builder.
View 5 Replies