I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.[code]...
View 7 RepliesI have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.
I have the following code :
var frontTemp:DisplayObject = this.animationInstance.getChildByName("front");
var backTemp:DisplayObject = this.animationInstance.getChildByName("back");
this.animationInstance.swapChildren(frontTemp,backTemp);
this.animationInstance.gotoAndPlay("animation");
I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working
I have the following code :
var frontTemp: DisplayObject = this.animationInstance.getChildByName("front");
var backTemp: DisplayObject = this.animationInstance.getChildByName("back");
[code]......
I've created a small animation containing a few images which i have converted to graphic symbols so I can alpha-tween them. I tweened the first image then copy/pasted the frames to do the next using the swap symbol function. When swapping the symbol I selected the desired symbol and pressed okay but nothing happened - I then dragged the desired symbol out of the library and onto the stage then deleted the previous symbol. As soon as I did that the new symbol I had just dragged out switched back to the previous symbol. [URL]. I have CS4 V10.0
View 1 Repliesim trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 RepliesI have several MCs on the stage. Each have a basic animation. They have a button embedded so I can click on them. When I click on the first MC it starts animating. When I click on another MC I need the first animation to stop. Is there a stop command I can put in there that stops the other animation before starting its animation?
View 4 Repliesso when i use it it has no errors no bugs and its like just goes to an animation or just stops (its been happening with ALL my games ive made and all the codes are correct and should work i've had help on it already i'm the animator i had a actionscript person working on it but he bailed and said he cant fix it but anyways i can send you the file if you gimme your email i tried uploading it to zip but i dont know how its too hard anyways on media fire and mega upload you cant send stuff to other people with a basic account.but anyways if you know what the problem is already from the description that would be helpful cause it should be something SOOO simple to fix cause this is happening with ALL my flash games
View 7 RepliesWhen i try to test a simple animated mask using test movie command, it looks like my animation stops on frame 1.
View 5 RepliesMy flash web page works good but when it starts for a first time (you go to link for the first time and web is not in your cache) animation stops after it is loaded. I have same problem after Ctrl+Enter export from Flash, sometimes I have to re-export few times.
[Code]...
my file works fine in the first loop but after the first loop the more it loops the more stuff stops working. and eventually after like 3 loops the animation stops the graphic is changing at different times and its all all over the place.i'm not sure why this happens i've had many theories. i'm not removing event listeners, maybe the text should be told to change upon the end of the exiting tween event.but i tried to do all of that and it still didn't work.
View 6 RepliesThe tab stays at its place once mouseover takes place. do the mouseover on BEST PROPERTY DEALS tab and you'll see the issue. how to make the animation smoother as i tried but i wasn't able to make complete cirle's animation smoothly as the MC used to come back the same path it took in the first half of animation.
View 0 RepliesI have a working Flash movie, using a couple of AS3 scripts. The main stage has some animation going on. My player.as plays some mp3 clips when I click a button. The problem is, the stage animation stops as soon as the sound starts ie. Sound.play() starts, then animation starts again when the sound ends.
The animation is based on
this.addEventListener(Event.ENTER_FRAME,loop3D);
so I gather something happens to ENTER_FRAME due to Sound.play(). What is weird is everything works perfectly on the Flash Test movie (ctrl+Enter). The animation does NOT stop during sound. What to do to make sure the animation goes on always?
I'm developing a simple application at the same time as I am studying some things in actionscript and I've got the following code:
ActionScript Code:
if (Key.isDown(Key.LEFT)) {
x -= speed;
this.gotoAndStop(2);
_xscale = -scale;
} if (Key.isDown(Key.RIGHT)) {
[Code] .....
I've got an object, and every time I press one of those keys those actions happen. My problem is that, when I press SHIFT, the object appears in that way (frame 3), but It doesn't play that animation it just stops in the first frame. How can I say "if you press SHIFT at the same time as RIGHT or LEFT, gotoAndStop(3); and the object that is in frame 3 only plays if either RIGHT or LEFT is down too"?
How can I make this 3d animation stop after 4 seconds?
Here is the code and I'm attaching the .fla so you can see what I'm talking about.
ActionScript Code:
var sensitivity:Number = 2;
//Sensitivity of movement
var followmouse:Boolean = false;
[Code]....
Her is what i want to do, and need expertise on how to accomplish. Mine now stops completely.1. I have a button I duplicated 13 times. It has a mc placed on the rollover state.I want it to when rolled over play the mc through regardless of any other actions happening.2. I have put those 13 buttons in mc and they rotate like a wheel.I placed a transparent button over the buttons and gave it a on rollover stop move on roll off, play movie. When it rolls over it stops the animation in the buttons as well
View 3 RepliesI have an all flash website I am finishing. On the "index" page of it, there are 7 buttons all pointing to different painting galleries on another page (or another MC in this case).
These 7 buttons happen to be movieclips so that I can have animation on rollover and rollout. A sample of the current AS2 code for them is below:
on (rollOver) {
gotoAndPlay("s1");
}
[Code]....
In this case, on the index page there is a movieclip with successful animation on rollover/rollout. I assign this clip the instance name of "gallery0" and when clicked, goes to a separate page showing the first gallery.
My problem is this, whenever I do assigned the instance name to any of the 7 movieclips, the animation no longer works. It simply sits there in the default state and acts as it should as far as navigation goes.
I have a flash animation where a image is panned back and forth by moving the mouse in the direction you want to pan the image. I want to make it so that when the mouse is outside the swf, in the normal HTML area of the page, the movement of the image will stop, or better yet go to a much slower pan.
You can view the swf here: [URL]
im using flash with AS3 and i use the instruction var myTween:Tween = new Tween(waves, "y", Strong.easeOut, waves.y, puntop, 3, true); for making simple animations, the think is that when i call a URLRequest the animation just stop and freeze.
View 1 RepliesI have made an animation in Flash, that would be ported to the iPhone/iPad; I want the animation to play when you rotate your finger on the screen and to stop immediately when the finger is lifted (Without starting the animation over), When the user would continue rotating their finger, the animation would continue to play.
How would I approach this in ActionScript 3.0?
how to detect if an animation in a movie clip stops?I make myself clear:I have a movie clip with different animations which I call from the stage with mc.gotoAndPlay("frame label"). Being these animation one after another in the timeline I call a stop() function to avoid the animation after to begin without being called.
Now, on the stage I want to play one of these animations and when this stops I want to make something happen.Is there an event that tells me "this movie clip is not 'animating' anymore"?
I have been following the Falling Snow for Flash Cs4/AS3.Everything workes fine, but when I try to add text or images to my Snowflake.fla-file I get this error message, and the animation stops: TypeError: Error #1009: Cannot access a property or method of a null object reference, etc..
View 4 RepliesI have some movie clips that hold the contents. (ie I have a movie clip to hold my navigation buttons and another to hold the actual content.) I wrote some action script on a separate layer that is outside of the movie clips, the AS adds event listeners and a few simple functions. All my navigational buttons work prefectly, I have a button that I use for email, this works the first the frame is loaded. If I go to another frame (another page of the website), and then go back, the button no longer works, I tested with just using trace("the email button was clicked"); oh, I thought I might add that each page of the website is a different frame, that is inside my content movie clip. my AS looks like this:
stop();
navigation_mc.home_btn.addEventListener(MouseEvent .CLICK, homeClickF);
navigation_mc.rates_btn.addEventListener(MouseEven t.CLICK, ratesClickF);
[code].....
I have created a movieclip1 :head, a second movieclip: body
created a movieclip that uses head and body and called that player.
And I create a simple moving animation : works great !
then I associated a class to head: Head.as
package {
import flash.display.MovieClip;
public class Head extends MovieClip {
[Code]....
When I uncomment trace this.alpha = 1 the ANIMATION IS STOPPED.
where when you roll over a circle button that I have on stage the circle spins. Then when I roll out the circle stops spinning. I think the best way to do this would be to remove the event listener but I'm not sure. Here is the code I've got to get this thing moving:
ActionScript Code:
// Add Listener to the Rotate Button
mc2_mc.addEventListener(MouseEvent.MOUSE_OVER, rotateButtonClicked);[code].....
I updated FlashPro from 10.0 to 10.0.2 through the adobe updater.After the update applied, Flash ignores any code entered on my action layers as if it were not there, even simple stop(); command.
View 2 RepliesI have a Flash Animation which i am running in a Browser Window .. Suppose a Man moving from Left to Right and also a BackGround MusicNow when I change the browser Tab to suppose check my gmail account while the man completes his walk from Left to Right .. The problem is the music is running but the man freezes at his place and continues his animation only after i return to the Flash animation containing browser Tab.
View 2 RepliesI need to set a mouse-controlled scrolling animation to ease when it starts and when it stops in AS2. Here's my current onEnterFrame script. Might be a little crude, but it succeeds in starting and stopping the animation when the mouse rolls off the movie. Moves left on one side and right on the other. I just want the starting and stopping to be eased a bit.
[Code]....
1 main flash movie called game.swf 1 external flash movie called maze.swf
The thing is from my main movie game.swf I load the external "maze.swf" true the LoadClip procedure. This works "fine".
The maze.swf as you can guess contains a maze game, and as you all will know this works with the Hittest commando to check if the character doesn't walk up against the wall.
If I start the maze.swf as a stand-a-lone this works fine, but as soon as I load maze.swf in my main movie. The hittest doesn't work anymore, because in some way the hittest is now checking with the coordinates of the entire main movie instead of only the boundaries of the maze.
I checked If I was calling to the right path, with _root and _level0 and etc. This is al correct because I can trace all the properties from maze.swf in my main movie. But the hittest simply won't work.
I'm trying to set up an app that moves one movie clip to the top of the screen, regardless of where it is or how deeply it is nested. To do this, I take the full path of the movie clip and go in, movie clip by movie clip, putting the depth of each nested clip on top. This part works perfectly. Afterwards, I want to move everything back to where it was. In the first step, I store the current depths of everything in an array before changing depths. In the second step, I'm trying to change everything back to its original depth, as shown in the array.
The code is below:
_global.videoPath = _root.clip1.clip2;
var pathString = String(_global.videoPath);
var videoPathArray = pathString.split(".");
var depthArray:Array = new Array();
[Code] .....