im using flash with AS3 and i use the instruction var myTween:Tween = new Tween(waves, "y", Strong.easeOut, waves.y, puntop, 3, true); for making simple animations, the think is that when i call a URLRequest the animation just stop and freeze.
View 1 Replies where when you roll over a circle button that I have on stage the circle spins. Then when I roll out the circle stops spinning. I think the best way to do this would be to remove the event listener but I'm not sure. Here is the code I've got to get this thing moving:
ActionScript Code:
// Add Listener to the Rotate Button
mc2_mc.addEventListener(MouseEvent.MOUSE_OVER, rotateButtonClicked);[code].....
import fl.transitions.Tween;
import fl.transitions.easing.*;
var homemanTween:Tween = new Tween(homeman_mc, "x", Elastic.easeOut, 1000, 50, 3, true);//frist tween
var adobeTween:Tween = new Tween(adobe_mc, "alpha", Regular.easeOut, 0, 1, 3, true);//second tween
how can I animate the 2nd tween after 3 seconds when 1st tween stops.
I have created a movie clip loader in my main movie and once I click on the button in main movie it loads external swf files accordingly.I have also added script so that the external swf will be scaled from "0" to "1" on both the X and Y axis. it works sometimes.But sometimes it scales movie not upto 100% it scales it around 20 to 30 %.I am not getting why? My code is correct or what?
[Code]...
How can I make this 3d animation stop after 4 seconds?
Here is the code and I'm attaching the .fla so you can see what I'm talking about.
ActionScript Code:
var sensitivity:Number = 2;
//Sensitivity of movement
var followmouse:Boolean = false;
[Code]....
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 RepliesI have a flash animation where a image is panned back and forth by moving the mouse in the direction you want to pan the image. I want to make it so that when the mouse is outside the swf, in the normal HTML area of the page, the movement of the image will stop, or better yet go to a much slower pan.
You can view the swf here: [URL]
I have created a movieclip1 :head, a second movieclip: body
created a movieclip that uses head and body and called that player.
And I create a simple moving animation : works great !
then I associated a class to head: Head.as
package {
import flash.display.MovieClip;
public class Head extends MovieClip {
[Code]....
When I uncomment trace this.alpha = 1 the ANIMATION IS STOPPED.
I have several MCs on the stage. Each have a basic animation. They have a button embedded so I can click on them. When I click on the first MC it starts animating. When I click on another MC I need the first animation to stop. Is there a stop command I can put in there that stops the other animation before starting its animation?
View 4 Repliesso when i use it it has no errors no bugs and its like just goes to an animation or just stops (its been happening with ALL my games ive made and all the codes are correct and should work i've had help on it already i'm the animator i had a actionscript person working on it but he bailed and said he cant fix it but anyways i can send you the file if you gimme your email i tried uploading it to zip but i dont know how its too hard anyways on media fire and mega upload you cant send stuff to other people with a basic account.but anyways if you know what the problem is already from the description that would be helpful cause it should be something SOOO simple to fix cause this is happening with ALL my flash games
View 7 RepliesI have a button on stage with motion tween and it stops at 50, i have this code at 48.
lead_btn.addEventListener(MouseEvent.CLICK, lead);
function lead(evtObj:MouseEvent)
{
[code]....
I'm creating 18 enemies (simple circle sprites) using a for loop,Then (using Math.random)I'm selecting 1 enemy at random and making it travel down the screen,Once it's at the bottom of the screen, it's y position will reset back to zero.However, I've got this problem where my motion tween comes to a complete halt after approximately 1min and 37secs.whyI've attached the .fla and .as, however, here's the .as if you can't be bothered downloading it: (Enemy1 is just a MovieClip I created)
Code:
package {
import flash.display.MovieClip;
[code].....
When i try to test a simple animated mask using test movie command, it looks like my animation stops on frame 1.
View 5 RepliesMy flash web page works good but when it starts for a first time (you go to link for the first time and web is not in your cache) animation stops after it is loaded. I have same problem after Ctrl+Enter export from Flash, sometimes I have to re-export few times.
[Code]...
my file works fine in the first loop but after the first loop the more it loops the more stuff stops working. and eventually after like 3 loops the animation stops the graphic is changing at different times and its all all over the place.i'm not sure why this happens i've had many theories. i'm not removing event listeners, maybe the text should be told to change upon the end of the exiting tween event.but i tried to do all of that and it still didn't work.
View 6 RepliesThe tab stays at its place once mouseover takes place. do the mouseover on BEST PROPERTY DEALS tab and you'll see the issue. how to make the animation smoother as i tried but i wasn't able to make complete cirle's animation smoothly as the MC used to come back the same path it took in the first half of animation.
View 0 RepliesOn a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 RepliesI have created an image in photoshop (96dpi, same as my monitor) and imported it as a png into flash where it becomes a bitmap. Once I had imported the image I went to library and allowed smoothing on the image and set it to lossless. It performs a motion tween and simply flys from one side of my movie to the other. However, the whole way it appears pixelated. I had done this on a previous movie with the same image, just with a different animation and I had the same problem. But in this case the 'allow smoothing' worked. Not this time though.
View 1 RepliesI have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.[code]...
View 7 RepliesI have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working.
I have the following code :
var frontTemp:DisplayObject = this.animationInstance.getChildByName("front");
var backTemp:DisplayObject = this.animationInstance.getChildByName("back");
this.animationInstance.swapChildren(frontTemp,backTemp);
this.animationInstance.gotoAndPlay("animation");
I have a working Flash movie, using a couple of AS3 scripts. The main stage has some animation going on. My player.as plays some mp3 clips when I click a button. The problem is, the stage animation stops as soon as the sound starts ie. Sound.play() starts, then animation starts again when the sound ends.
The animation is based on
this.addEventListener(Event.ENTER_FRAME,loop3D);
so I gather something happens to ENTER_FRAME due to Sound.play(). What is weird is everything works perfectly on the Flash Test movie (ctrl+Enter). The animation does NOT stop during sound. What to do to make sure the animation goes on always?
I'm developing a simple application at the same time as I am studying some things in actionscript and I've got the following code:
ActionScript Code:
if (Key.isDown(Key.LEFT)) {
x -= speed;
this.gotoAndStop(2);
_xscale = -scale;
} if (Key.isDown(Key.RIGHT)) {
[Code] .....
I've got an object, and every time I press one of those keys those actions happen. My problem is that, when I press SHIFT, the object appears in that way (frame 3), but It doesn't play that animation it just stops in the first frame. How can I say "if you press SHIFT at the same time as RIGHT or LEFT, gotoAndStop(3); and the object that is in frame 3 only plays if either RIGHT or LEFT is down too"?
I have a class which extends a SWC , in the swc i have two boxes, front and back and an animation on the same timeline. The animation works fine without swapping when I swap them the animation stops working
I have the following code :
var frontTemp: DisplayObject = this.animationInstance.getChildByName("front");
var backTemp: DisplayObject = this.animationInstance.getChildByName("back");
[code]......
Her is what i want to do, and need expertise on how to accomplish. Mine now stops completely.1. I have a button I duplicated 13 times. It has a mc placed on the rollover state.I want it to when rolled over play the mc through regardless of any other actions happening.2. I have put those 13 buttons in mc and they rotate like a wheel.I placed a transparent button over the buttons and gave it a on rollover stop move on roll off, play movie. When it rolls over it stops the animation in the buttons as well
View 3 RepliesI have an all flash website I am finishing. On the "index" page of it, there are 7 buttons all pointing to different painting galleries on another page (or another MC in this case).
These 7 buttons happen to be movieclips so that I can have animation on rollover and rollout. A sample of the current AS2 code for them is below:
on (rollOver) {
gotoAndPlay("s1");
}
[Code]....
In this case, on the index page there is a movieclip with successful animation on rollover/rollout. I assign this clip the instance name of "gallery0" and when clicked, goes to a separate page showing the first gallery.
My problem is this, whenever I do assigned the instance name to any of the 7 movieclips, the animation no longer works. It simply sits there in the default state and acts as it should as far as navigation goes.
I have made an animation in Flash, that would be ported to the iPhone/iPad; I want the animation to play when you rotate your finger on the screen and to stop immediately when the finger is lifted (Without starting the animation over), When the user would continue rotating their finger, the animation would continue to play.
How would I approach this in ActionScript 3.0?
how to detect if an animation in a movie clip stops?I make myself clear:I have a movie clip with different animations which I call from the stage with mc.gotoAndPlay("frame label"). Being these animation one after another in the timeline I call a stop() function to avoid the animation after to begin without being called.
Now, on the stage I want to play one of these animations and when this stops I want to make something happen.Is there an event that tells me "this movie clip is not 'animating' anymore"?
I have been following the Falling Snow for Flash Cs4/AS3.Everything workes fine, but when I try to add text or images to my Snowflake.fla-file I get this error message, and the animation stops: TypeError: Error #1009: Cannot access a property or method of a null object reference, etc..
View 4 RepliesI've got a MovieClip containing several child clips (images and text). I'm trying to scale this parent clip very slowly - from 102% down to 98% - this works, however the child movie clips are all scaling a bit jerkily - like they're trying to stick to pixels or something. What's the cure for this? The scaling is done by using a motion tween on the timeline by the way. I've tried to tick "Cache Bitmap" but that makes no difference. If I used the 3D motion tween, there is no jerkyness. But I need to publish to flash 9, so can't use that!
View 1 Replies