I downloaded OSMF Sample player and opened osmf.html, (C:playerosmf.html)it worked perfectly without any problem.The same file when I deployed onto tomcat server,[URL] I get the error "The specified capability is not currently supported" while debugging.
View 2 RepliesI have installed FMS 3.5 on an Intranet server, and it installs its own version of Apache.This has now caused the localhost to open the FMS page. Disabling FMS 3.5 returns back to the Localhost page.It is not possible to run FMS 3.5 on an existing Webserver with Apache?
View 1 RepliesI think I'm getting closer to the source of my problem.Let me outline my setup first (I'm using private IPs for example only). I have set two IP addresses to one network adaptor as follows:
CentOS 5.3 server running Apache 2.2.3 on eth0 with IP 192.168.0.78 <- working fine absolutely no problems at all
FMS 3.5.2 running Apache bundled with FMS on eth0:2 with IP 192.168.0.79
In fms.ini I have the following config:
ADAPTOR.HOSTPORT = 192.168.0.79:1935,80
HTTPPROXY.HOST = 192.168.0.79:8134
At (apparently) random times, the FMS Apache stops serving requests, but does not crash, and for some reason blocks requests to RTMP at the same time. Nothing appears in the log files which makes this even more tricky.I've run a test by shutting down apache as follows:
./httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k stop
and I expected RTMP to stop working aswell, however it continued serving up RTMP, which has led me to believe that something is then stalling the serving up of RTMP requests. This results in total downtime of all applications.
I've imported a video into Flash and have selected a skin for the video player.When I test on my local machine the video controls (skin) display and function as they should.But when I load the upload the .flv to the server, then re-import into Flash and select video deployed on server, publish, upload to server and and test the movie, the video plays fine but the video controllers are not appearing.I am using the html that Flash(CS5) created in the Publish Settings. I've different player skins with the same result.I've tried importing both .flv and .f4v's with the same result.
View 1 RepliesI installed the FMS 4.5 on a debian system already running an apache web server. I configured the httpd.conf as mentioned in d6093a7e2f8312a374a1bde-8000.html but when i call a streaming url e.g. http://<IP>/hls-live/livepkgr/_definst_/liveevent/livestream.m3u8 the request is still handled by the old apache, not by the FMS
View 9 RepliesI have written a program to publish the audio and video data to the FMS. I am publishing the video data to FMS in live mode and trying to play back via OSMF player. When i start publishing video data in the livepkgr application folder of FMS files like .bootstrap, .control, .meta are getting created. But when i try to playback via OSMFplayer i will get error 1009 and one intersting thing what i have observed is after 7 minutes this error won't come and OSMF player starts playing properly. give the solution for error 1009 which comes only for first 7 minutes?
View 12 RepliesFMS 4.5.1 Windows 2008 SP2 (64bit).We are deploying Adobe Flash Media Server 4.5.1 on a new server but Apache does not work (does not serve html files or stream Quicktime H.264 files).Assorted Problems & Error messages:
1. The webroot/index.html page loads locally, but the HLS/HDS streams result in a 2032 error.
2. The webroot/index.html page does not load from external locations:[URL] (does not load externally).[URL] (our old server, FMS 4.0 and Windows 2003). Everything on this server works, the 2 major differences being that it is running FMS 4.x on Windows 2003.
Some RTMP streaming works externally and internally (f4v files):[URL]FMS does not stream Quicktime H.264 files even though f4v files work.New server (does not work): [URL]Old server (Quicktime/H.264 file works):[URL]Apache does not serve Quicktime/H.264 files: I made sure that Apache had all of the correct mime types specified.
Error messages and attempted solutions:Apache's erro_log file: a. httpd.exe: Could not determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
2. FMS master.log file
a. FMSHttpd -k start returned 1: [URL]1a: Edited httpd.conf file to include ServerName 63.116.232.5
1b: The presence of this error message also indicates that Apache httpd was unable to obtain a fully-qualified hostname by doing a reverse lookup on your server's IP address.
In order for the server to accept external connections a reverse DNS lookup needs to be created. I created a reverse DNS lookup and edited the /etc/hosts file to include the IPaddress, Fully Qualified Domain Name (FQDN), shortname.
[code]....
I am looking to build a custom OSMF player such as this OSMF player sample, however I only have Flash CS but not Flex. Is it possible to build a OSMF player without using Flex?
View 2 RepliesIn my current flash application I and my co-workers are using Loader to load some SWFs from our server. It works perfectly while we have the flash application on our computers running it trough Adobe Flash CS3 but when we publish it and move the html page to our server and try and run it from there the loading doesn't seem to start. I have the firebug plugin for Firefox so I checked if flash actually loaded the images and according to firebugs network monitor it found all needed resources and downloaded them successfully. But the behaviour of our application is as if the loading starts but the complete event is never sent.
View 3 RepliesSometimes RTMFP stops working on my server, and I have to restart it for RTMFP to work again.Here is what I saw in the error log :
2011-04-29 05:43:17 26120 (i)2631502 The server rejected an invalid flow. -
2011-04-29 05:44:22 26120 (i)2641213 Connection rejected by server. Reason : [ Server.Reject ] : Adaptor: _defaultRoot_, VHost: TheFMSServer, App: Application/_definst_, (onConnect call
[code].....
I'm using FMS Streaming 3.5.0 r405 on linux servers to stream videos with RTMP/RTMPT. We have decided to use the new proxying function to redirect HTTP requests to a Web server. We did not install the included Apache server, but used a lighttpd server installed on the same machines and configured to listen on port 81. So when a client connects with our player, it tries first RTMP, RTMPT and if it times out on these attemps, we try to go through with HTTP. FMS proxies the HTTP request received on port 80 to the lighttpd server on port 81.
My fms.ini file contains: # Whether to start and stop the included HTTP server along# with FMS.#SERVER.HTTPD_ENABLED = false
# IP (address and) port that Flash Media Server should proxy# unknown HTTP requests to. Leave empty to disable proxying.# With no address, specifies a localhost port.# For example:# HTTPPROXY.HOST = webfarm.example.com:80#HTTPPROXY.HOST = :81
This works well, but after a few hours, the HTTP proxy of FMS does not work anymore. Lighttpd is still responding on port 81. There is no error in all log files. Just stops working! I have to restart FMS to enable again the tunnel. This behavior happens on all my streamers.
We have a FMS 3.5.3 running on a production server, a 2x quad-core Xeon E5345 CPU based hardware with Windows Server 2008 R2 64-bit OS.
The FMS service streams live streams to hundreds of simultaneous Adobe Flash Player 10 clients through RTMP at port 1935.ally with a higher number of simultaneous clients connected (around 1, one can see a rising number of clients of the loaded (single) application (never diminishing) through the Administration Console. It appears that the clients "linger" - i.e. the number only counts up, never down, from then on.
As if this was not sign of problems enough in itself, the bandwidth graph drops to near zero - i.e. it appears that streaming stops working too. Restarting application helps. The logs do not show anything UNTIL AFTER application is attempted unloaded via console. There are messages of various importance in the event log, among these the weird warning "Asynchronous I/O operation failed (Failed to attach to completion port: The parameter is incorrect. 87)." There is more too, which I can provide on demand.
The application is pretty rudimentary. Of the entire API, we only use Application, Client and SharedObject classes. There is a single persistent shared object, and that's it.
We are using a clean install. Only Microsoft supplied and FMS processes are running. Windows Firewall is on though, and has rules for letting in connections on ports 1935 and 1111. We need a stable server, and I have to restart it manually every day, sometimes twice in an hour, which frustrates me.
We have a little app in use with a customer where html links are generated dynamically at run time. The link text and url are put together from a couple of txt files that the customer regularly goes in and edits. These links have recently stopped working.
Of course, you would think the immediate culprit is the customer who has made a mistake in the txt files. But the the same vars from the same files are used to generate a couple of buttons on the page that DO work. And everything works when I export it from flash. It stops working as soon as it gets to a web server.
Here is the output from the functions that piece together the input data:
[Code]....
And here is the link to the app: [URL]
Choose a category in any of the lists and then any of the subheaders that appear. Most have a link in them. It's in Swedish but I know you lot are smart enough to navigate a flash app without understanding what you're clicking on
I put together an applet that uploads images via as3httpclientlib to a servlet. The applet works fine in debug mode (through flash builder) and until today it worked when deployed. From the servlet logs, it appears the servlet never receives the image(s) byte stream, therefore my hunch is the applet is not posting the multipart data.
View 1 RepliesI have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
Right now I do not have "server". Example: I do not have anything like windows sever 2000, 2003 etc. but I have and running IIS server on the same Windows XP Pro. On this very same machine I installed FMS server with the Apache that came with the FMS. I have read and followed the instructions time and time again in deferent ways to deploy my video on the server but no idea I used is working so my clients could view my videos. Looking forward to have site like "hulu" / "You Tube".
View 1 RepliesDoes is matter what HTTP server I use?In the process of upgrading from FMS 3.0 on Windows using IIS 5 to FMS 4.0. Will dynamic HTTP Streaming work from a Windows server?
View 1 RepliesMy Flex application is successfully calling functions in a JavaScript file through the ExternalInterface class when these are in the bin-debug folder and the JS file is located in the same directory as the Flex app.But when I test the Flex app on the server, it is not interacting with the JavaScript. The only difference I can find is that on the remote server the JS file is being pulled in from a URL, instead of locally. The JS file URL is in the same domain as the Flex application, therefore I don't think this is a cross-domain issue. What am I missing?
View 2 RepliesI'm currently working on a project that need to communicate with java from air without the use of a server like Tomcat. For this i found and use Flerry.Communicating between Java and Air is no problem, as long as I try to send a message from the class that I initially instantiated from Air.What I try to do is subscript to messages from a Message Class in java and use that class to send info and errors to Air from Java.
MessageController.java:
public class MessageController
{[code]....
the infoMessageHandler receives an message containing test message, as it should. How can I dispatch messages from whatever class in Java and catch them on the Air side?
I have installed FMS 3.5 on a Linux root server with openSUSE 10.3 without included Apache 2.2. That is why the webserver is already installed and running. Now I should know next steps to configure both FMS and Apache to make it work for streaming recorded .flv files via HTTP and the VOD application. Starting Apache manually after FMS server is running always ends up in failure and error message: 'Address already in use. Could not bind to address [::]:80. If I start Apache first and then FMS server everything is running. But I guess this is not correct because the manual mentioned first starting FMS server.
View 21 RepliesI have apache web server installed on linux with one ip and some virtual hosts. Can I install fms on this server?
View 1 RepliesI'm going to setup a web server for streaming h.264 video for flash player and ios device.I know that I need the vod with HDS and HLS, and I don't need real live stream recording.At this stage, I have configured my apache server and use modules in FMS.I have referred to this document,[URL]It seems works fine now.Because I don't need to use FMS any more in my environment, what's the limitation I need to concern in terms of license, performance, etc. ?
View 4 RepliesOne of my web applications have developed in java and using tomcat server. Now I want add one more feature in my application that is peer to peer audio streaming. Actually I want that anyone speak (using microphone) on the client side and I will hear his voice on my server speakers and vice versa. Also save our communication in any file and also send the audio stream to IP intercom.
For that I am trying to use Flex Builder. Flex NetStream class is good for the streaming and we can also attached microphone. But the problem is on the server side. How can I get the audio stream on server side?
how can I get stream from server to client and vice versa?
I create a Flex application that works with a browser using a database with the MySQL server that I can create, modify and delete data from a database. The problem I encounter now is that I want to see my program with Adobe AIR (virtual machine). At the display that does not pose a problem. The problem is that air can not reach the database server is located in the MySQ. the error message displayed is as follows: "Error : client.Error.MessageSend - Channel.connect.failed error tConnection.Call.Failled : HTTP: Status 404:url:'[URL]"
View 2 RepliesI have a perl socket on my apache server that correctly takes input from sockets and sends it back out to every socket connected to the perl socket. I have tested the perl socket, and it works correctly.
When I launch the Flash in the IDE, as a flash program, it functions correctly with the perl socket.
However, when I try to launch the Flash in a Browser on my apache server, it tells me it is unable to connect to the server.However, I am seeing from feedback from my perl socket, the flash connects for about a half of a second, and thats it.
What could be the problem, do I have to include code in the flash to allow XMLSockets to connect in a browser as well? Is there certain things I need to do with my apache server to make it work?
Also if I 'Preview as HTML' from Adobe Flash CS4, it does not connect.
I've been through all the instructions and after running all the diagnostics through telnet it seems PHP is installed correctly as well as APACHE.When I edit the httpd.conf file however and add:
LoadModule php4_module "C:/PHP/php4apache.dll"
Apache fails to start once the httpd.conf is saved with that LoadModule request.It is in the specified directory.It is PHP4 on Apache 2.2. on Win XP.
I just created a flash audio player.. It running properly in localhost, But if i host it into the server, Its not running when i play MP3s but some of the mp3s running well.
Here I have given the demo link... [URL]
I have fms 3.5 installed, i did not install Apache because i already have iis7 running. how do i configure fms with iis7 to allow for http tunneling/streaming when rtmp is blocked?
View 3 Repliesadd php and mysql to fmis with apache?
View 1 RepliesHas anybody experience to install FMS 3.+ Apache on the same machine with IIS7. Our business department decided to save some money on hardware and we have to install FMS on production, where we have already hostted ASP.NET WebSite. We have to do steaming video on our ASP.NET pages. I think to configure FMS on ports 1925,6000 instead of 1925,80. Will it be ok for Apache? Actually, I tested the installation with this configuration on our testing enviroment and it works, but the funny thing is that I can put rtmp://111.111.111.111/vod/sample.flv works (without port 6000). Is it correct behavior?
View 3 Replies