Flash 10 :: Text Not Appearing In Swf As In Fla
Aug 30, 2011
So I'm working on a very simple animation with some large text areas and have noticed something rather irritating. I'm hoping that someone can tell me why this is happening, and also hopefully a way around it.
When I view the .swf, I'm noticing that text that fits perfectly in the text areas in the .fla is being pushed down passed the edge of the text area. So when the movie exports, something weird happens and the text gets cut off at the bottom. Has anyone else experienced a similar problem, and does anyone know of a way to fix it?
View 0 Replies
Similar Posts:
Jun 5, 2006
I am building a banner for a website..when i do test movie in Flash the text is there and it's also there when i upload the movie but when i just double-click on the file and it plays in Flash Player the text is not there..
View 2 Replies
Mar 23, 2011
[URL] I am trying to add text to a slideshow like in that link. However, the text won't show up, even after I follow the directions. I've been at this for an hour and the same result has occurred time and time again: THE TEXT WON'T SHOW UP.
View 3 Replies
Mar 28, 2012
I am creating dynamic TextFields in actionscript 3.0. Like many others, my text disappears when I set .embedFonts = true; ArialSlim is embedded and exported for actionscript. I have successfully tested with trace(Font.enumerateFonts()); Interestingly enough, when I comment out the embed line (as shown below), the font works properly. Alternatively, .setTextFormat(); also works properly without the .embedFonts line.
[Code]....
View 2 Replies
Jun 10, 2010
I created a Contact Form with Flash 4 on a website: [URL]. When I fill out the form in the "Contatti" TAB (contacts) and click on "invia" (submit) the email browser opens correctly (Entourage) but the text in the site form does not appear in it.
invia_btn.addEventListener(MouseEvent.CLICK, sendData);
function sendData(evtObj:MouseEvent):void{
trace (nome_txt.text);
trace (societa_txt.text);
trace (email_txt.text);
[Code] .....
View 7 Replies
Oct 20, 2009
i had a actionscript1.0 flash file.i edited that file using actionscript2.0(flash8.0)
and pubilsh .swf file. that .swf file did not have page number,any label,text.it only has display images
View 1 Replies
Oct 20, 2009
i had a actionscript1.0 flash file.i edited that file using actionscript2.0(flash8.0)and pubilsh .swf file. that .swf file did not have page number,any label,text.it only has display images.
View 2 Replies
Jul 2, 2010
I have two layers in my FLA file (called 'tutorials', and 'Layer 2').When I open my library and click on one of my symbols (a movie clip) I can see these two layers:They are both AS layers and in the first one, 'tutorials' I have:[code]Yet when I go online and look at my uploaded movie, I cannot see anything, except under Tutorial I get 'undefined'.
View 0 Replies
Oct 5, 2010
Find whether the text is appearing before other tag are after other tag. For example if the text1 is appearing in xml before <pic> tag means the text boxes are arranged the following way.
1. Text_box_1 appear first
2. picture_box appear second
3. Text_box_2 appear third
If i remove text1 from xml means the boxes should arrange in the following order.
[Code]...
View 5 Replies
Feb 5, 2010
I have a dynamic text field on my stage with the instance name of "yesno". In the text box panel, (so not the code) I have it set to embed all the glyphs. In my code I have the following:
[Code]....
View 5 Replies
Sep 2, 2010
why the text is not appearing in my drop-down menu. When I click on the menu just the backgrounds appear for each selection, but no text on them.
var menuButtons:Array = ["Skin Tone"];
var subMenu1:Array = ["White", "Brown", "Tan", "Olive"];
var chosenMenu:Array = new Array();
var subMenuOpened:Boolean = false;
[Code].....
View 20 Replies
Jul 19, 2010
I added a custom class for a custom font in the flash project library.Now when i try to embed the font and use it from actionscript , the text is not getting visible.[code]
View 3 Replies
Sep 2, 2009
I have created a login form and I masked the whole movie as it shown in the attachment. After masking,, the text on buttons is disappeared. I used components as buttons... you can view my project in the attachment.
View 3 Replies
Feb 9, 2010
I have a dynamic text field on my stage with the instance name of "yesno". In the text box panel, (so not the code) I have it set to embed all the glyphs.In my code I have the following:[code]but that text does not appear when the function that it's in is used. If i do not embed any glyphs, it appears exactly as written.I've done this in other animations and never had a problem with it. (in fact the yesno text field is copied directly from another fla)Nothing looks different and my publication settings aren't any different, any clue what's going on?
View 1 Replies
Sep 8, 2009
I've got a game function called GameOver:
Code:
private function GameOver():void {
t.stop();
t_fall.stop();
[Code]...
View 7 Replies
Sep 11, 2007
Does anyone know why the first part of my CSS formatted is the only part that shows? I know the rest of my text is formatted correctly because I can erase the first part, and only show the other portion. I just want to be able to load a decent size set of text into a text block I am making with a scrollbar.
View 1 Replies
Jul 7, 2011
I've added text to the stage and if I test it out using ctrl+enter, it does not show up. If the swf "loads"/"simulate load" then the text shows up, but not in the correct font.This is the error when the swf is not preloaded:VerifyError: Error #1014: Class flashx.textLayoutcontainer::Container Controller could not be found.at flash.display::MovieClip/nextFrame()at spot_fla::MainTimeline/l()I've also recently added an AS3(CS5) preloader which is when this started. The library mc items have been set to export in frame 2 but the font doesn't show up. The font has been embedded as well but linking/unlinking it does nothing. The AS3 preloader is a simple script that a lot of tutorials online use.The textfield is located in frame 2 of the timeline and is not referenced in AS. However it is inside of a mc that has a mouse listener on it(mc).
View 3 Replies
Dec 17, 2003
This is what I have attached to the button (text converted to a button)
[AS]
on (release) {{
_root.createEmptyMovieClip("blank3test", 1);
_root.blank3test._x =134; _root.blank3test._y = 80;
_root.blank3test.loadMovie("link3.swf");
}}
[/AS]
But the external swf "link3" doesnt appear.
View 4 Replies
Aug 23, 2010
I have a swf file containing some text. When I print it from flash the text is coming out blurry and is not as crisp as I would like.
View 0 Replies
Jun 23, 2009
I dont understand why this text is so shaky and wobbly when tweened, what am I doing wrong?
View 2 Replies
Dec 23, 2009
I need to filter log messages based on the log level and a text appearing in the log message. These messages are in the following form: 2/23/2009 17:33:26.379 [INFO] TMSNG.Main Channelset configured with url [http://172.16.34.4:8080/tms-flux/messagebroker/streamingamf] 12/23/2009 17:33:26.380 [DEBUG] org.springextensions.actionscript.core.command.CompositeCommand Executing composite command '[object CompositeCommand]' in sequence
I already have the code below that creates 2 regular expressions (one for the level and one for the text) but I was wondering how I could combine these into one. I tried several combinations, but since my regexp skills are non-existing I couldn't get this to work.
[Code]...
View 1 Replies
Feb 1, 2011
I created a simple flash music player to put on a website. It is viewable in Safari, FireFox and Chrome on my Mac. Unfortunately, when I try viewing it in two browsers on a PC (Chrome and FireFox), it doesn't appear at all. The PC computer does have the most updated version of flash as well. Also, when I try to view the html document created from Flash on the PC computer, my flash player does not show up either.
View 1 Replies
May 9, 2011
I've tried to load my xml but to no avail.Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type keeps appearing. I have a lot of loader in that flash. could it be the problem?
Below is my code and xml info for your reference.
[Code]...
View 1 Replies
Feb 6, 2011
I have a jquery script box that opens up and it appears behind my flash.The javascrip that runs the flash is
// JAVASCRIPT VARS
// cache buster
var cacheBuster = "?t=" + Date.parse(new Date());
// stage dimensions
[code]....
So how can i get it so the JQUERY script box to open over this flash?
View 1 Replies
Feb 11, 2011
I have two movie clips called mc_England and mc_Scotland they are on separate layers but placed on the stage in the same position.
When I click the close button on one of the clips I can't tell which close button I'm clicking.
If I move the two movie clips onto different parts of the stage the code below works correctly.
As the Close button being in the same position was causing the problem.
I decided to set the position of each Movie clip to come on and off stage.
This works apart from the FinishTween not completing before re positioning the movie clip.
Is there a way to set the position after a tween has completed?
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code]....
View 2 Replies
Feb 18, 2012
My assignment is to create a real time (meaning using a game loop) Flash game in an object orientated manner. I've been following guides online, and I think I've got the basics down, but my player sprite isn't appearing.
I imported an image into Flash and then converted it into a symbol called Player, and now it's a movie clip. I exported it for ActionScript, and called the class com.Player.
Also, I have set the class of my document to com.Engine (this is where I plan to have my game loop and call methods to other classes).
Then, I created a directory called com in the same directory as my .fla. Inside that directory, I made Engine.as and Player.as, and here's the code for them both:
package com {
import flash.display.MovieClip;
import flash.display.Stage;
[Code].....
According to what I know, that should make the player appear in the center of the screen when I run it, but it doesn't. I've verified that the Engine class and constructor is being called using trace("hello world"), and I get that output. I also know that the constructor for the Player class is being called by using the same method. I just don't get why the player doesn't appear on screen.
If I drag the Player symbol (correct terminology?) from my library onto the stage, the player sprite shows up... so I know there's an image attached.
View 1 Replies
Jul 30, 2008
I'm running XP and have installed 6 .otf fonts, from the Avenir family. Flash MX 2004 and Flash 8 don't see all but the Light and Roman versions of the font (they are the only ones that appear in the font menu). Adobe Illustrator and Photoshop display all the fonts, however.
An associate suggested that sometimes Flash doesn't like the names to be non-standard; in other words, it doesn't like "Heavy", but prefers "Bold", etc. This seems to support the fonts not being displayed in the Flash font menu, as they are AvenirLTStd-Heavy.otf, AvenirLTStd-HeavyOblique.otf, AvenirLTStd-LightOblique.otf and AvenirLTStd-Oblique.otf. The only two being displayed in the font menu are AvenirLTStd-Roman.otf and AvenirLTStd-Light.otf ("Roman" and "Light" are pretty traditional names).
I've tried renaming the fonts to "Bold" and "italic", etc., but Windows still sees the original names. I've tried opening the fonts in Notepad and changing all references (for example, all "Heavy" to "bold"), but saving the font file (even if I add and remove a space) makes it unreadable as a font (security issues, I think). One reason I think it's a naming issue, is I did try renaming Heavy to Roman, and installed it, and Flash saw it as Roman, but it had the Heavy characteristic. This work-around doesn't work, however, as I need Roman, too (and renaming it Roman2 doesn't work). Is there any solution for this? I need access to all of the Avenir font family, as it's for a branded project that uses Avenir specifically. Oh, and last but not least, I have the fonts installed on my Mac, and Flash 8 and CS3 both see all the fonts, no problem.
View 2 Replies
May 9, 2010
I have a website which I am setting up. However, I want the first page (Home) not to have any sub menu. When I change the value of true to false all the other pages where I want the drop down to appear also disappear.I want other pages to have sub menu but not the home page. I have tried to change the xml path etc, but nothing seems to wor am new to xml and finding this very challenging.I have uploaded the config.xml and the layout xml's. I have also placed the index.htm and js script therelso me understand from where it is reading the config.xml.UPDATE:I checked the SWF and yes the it is pointing to the config file. What I still dont understand is that how can i remove the sub-menu from home while keeping it for other pages.
View 1 Replies
Dec 31, 2010
My drop down menus are appearing behind my flash videos (JW Player) in Chrome and Internet Explorer. The problem does not occur in FireFox and Safari.changing the wmode and the z-index of the nav and video, with no success.
View 2 Replies
Mar 6, 2011
However I have created a flash video and have placed it on my website (using dreamweaver) and everything works perfectly locally. So when it came uploading it to my webhosting, the flash file does no appear and i do not know what the problem is.
[URL]
View 1 Replies
