After our upgrade some of our streaming media files no longer stream... I have performed an flcheck on the files in question and they are returning the following error:
FLVCheck version 1.0 - Utility to validate flv and mp4 media files.Copyright (C) 2008 Adobe Systems Incorporated. [URL].. 10-08-13 15:49:07 Error: -31 Bad box hierarchy. Found a track childbox before track. At this point we have a large majority of the files that normally streamed quite normally and fine in 3.0 not streaming at all in 3.5 I hate to back out of the upgrade, but if we can not find a solution to this problem it will have to happen.
I recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
Simple questions: can I upgrade FMS 3.5 to FMS 4 and not have to change any setting or our programs - so I upgrade and our existing system keeps working without any problems??? and - how many concurrent streams (audio only) can be streamed with FMS 4?
Tried to upgrade to FMS 3.5.2 on CentOS 5. No dice. Listener doesn't start. No other (as far as I know) services running on :1935. Admin server works, but not Streaming Server.
We just upgraded our FMIS from 3 to 3.5. All our VOD streams were working prior to the updgrade. Now the streams do not play. When logged in to the admin and checking the Server Log, this is the message. I assume this is correct. I have **** out the address.
[Code]...
Is there anything more that I can check to see where this is failing?
I am running the amazon AMI ami-6a1deb03 that has fms version 4.0.1.8011
However i need to cap the maximum number of connects to the server for a live event.It seems like the <MaxConnections> tag in Vhosts.xml is not enforced due to a bug in 4.0.1; but its known to work on 4.0.2 (http:url.....)if there's a new AMI available that has the newer release? If not, When will that be available? and can I upgrade the existing server to 4.0.2 ?
I sucessfully upgraded from FMS to FMIS. In the Admin it shows that the license is now Flash Media Interactive Server r405 I believe. The live and vod services continue to work as expected. On a separate development server I have developed a number of applications that I want to move to the new production server. Nothing connects at all on the new server. In the Admin, all the applications show as being available. Is there something I need to do to make it work?
we are using FMS 2.0. I need to patch the buffer overlfow vulnerabilities. The doc that Abobe supplies with the patch/upgrade releases is confusing. The doc for the 2.0.1 recommends uninstalling 2.0 prior to the 2.0.1 installation. Upgrades 2.0.2 and up do not state this.. However, installing 2.0.5 specifically mentions patching v 2.0 vulerabilities, but does not mention uninstalling first OR that prior patches need be applied...And, finally version 2.0.2 - 2.0.5 do not mention is the patches are cumulative - are they?
I need to do an in-place upgrade from 3.5.2 to 3.5.3 on my origin servers. Is there a recommended precedure to acheive this? I want to have the minimum downtime possible. CentOS, x64. I think something along the lines of :
I have Flash CS5.5 I just uploaded an swf with a few button instances I got the msg that I needed to update my Flash player so I did. After that when I went to test the swf I get no button cursors on any buttons in the swf. The buttons work when I press on them but there is no cursor. If I publish the file locally the cursors are there, I made a few different fla's with test buttons to make sure and they all do the same thing. The publishing settings are set for 10.2 , this seems to have happened once I got the new Flash player 11.3.
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
I'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
I have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
We purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
I am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
We will only use the servers for Live streaming and VoDs, so far no plan for any complex applications to be deployed on the servers yet. As far as I understand, the bottleneck of streaming servers are with network connection rather than CPU or resources (servers are only support up to 4GB of RAM anyway).
I want to record a stream which is published with Flash Live Encoder to FMS 3.5, but split the recording in files with predefined length. For example if a stream 'webcam' is published I want to record it in chunks of 10 minutes: 'webcam1.flv', 'webcam2.flv' ... From what I can tell there's no facility to work with timers. The only solution I could think of was using stream.record() with a time limit parameter but that seems like a hack because it triggerstStream.Record.DiskQuotaExceeded on the stream when the recordin should stop and start recording another chunk. Has anyone done something similar?
