Flash :: Start Using A Purchased Template?
May 26, 2010
I purchased a template from a website (Dreamline Studio) and have downloaded the included files. I have Adobe Design Premium CS4 loaded on my computer. Now that the files are saved to my computer, how do I actually start trying to make edits to this template? I tried to open the file(s) in Flash but it keeps saying that its an unexpected file type. I downloaded all recent updates from Adobe to make sure I had the latest releases for CS4 but this did not . I'm sure this is simple and I am excited to actually begin learning Flash, but for the life of me - I just can't figure out how to GET STARTED
View 1 Replies
Similar Posts:
Apr 28, 2010
I'm very new to flash and as3 design patterns. But I can read and write as3 quite ok, i've created small widgets with that. I've developed several web sites using php and also python.
Now for a educational cd-rom project i'm working on, i've basically designed all templates (A home page, a generic page with navigation and a sidebar - kind of like a wordpress blog). I have all the data for the cdrom on word files, which i intend to place on xml files.
My question is what is the best way to start a project like this? Can anyone guide me to a template or something that can be used for kickstarting this? kind of like a wordpress (without the admin)? Or am i on this all wrong?
View 2 Replies
Nov 21, 2010
I use DW CS4. I've gone to the Library panel, as suggested (below) but cannot find the "a Text 1" text as suggested.
Instructions that came with the Flash file:
This file has downloaded from Istockphoto.com.Thanks for buying this file.
This is a file for Adobe Flash version from CS3, CS4 or CS5.
For open source ".fla" file run Adobe Flash and press Ctrl+O.For viewing all movie clips open library panel (F11).Double-click mouse on any movieclip for view or edit.
For replace text - open library panel and click clips "a TEXT 1", "a TEXT 2" and "a TEXT 3" and change it.
All elements maded in vector, scalable to any size. No raster.
[URL]
View 4 Replies
May 24, 2010
If you make multiple flash files from the same template and then edit that template, will all those files have those same changes? If not, is there a way to make the same change on multiple files at once? Basically the same idea as linking HTML files to a single CSS file...
View 1 Replies
Mar 29, 2004
Jesus Christ - I thought I was really good in flash.Got this template and I can't see S***.
WTH - is it supposed to be this difficult to manipulate a template or am I stupid???
Go into project explorer and can't see much AS so how the hwll are they getting the images and text into the flash swf. By the html??? I don't think so.
View 5 Replies
Oct 14, 2009
I bought this template, and am trying to make some of the pictures when clicked have hyperlinks that go to other websites, i am turnong the picture into a button and adding this code in the action script [code]
View 3 Replies
Mar 12, 2009
I bought a flash news ticker from the site Flash Den but haven't been able to do much with it because it's in AS2 and I only really know AS3.The news ticker loads the text/link from an XML file, but it has a problem loading characters such as forward slashes (/), colons (:) as well as other characters?
View 5 Replies
Jul 21, 2009
i have a flash clip that i am trying to imbed into a joomla website of mine, and the problem is that it doesn't auto-start. If i open the swf file it will show a blank screen until i right click play or ctr+entr, on the website it simply doesnt show the flash. here is the link to the swf file [URL]
View 1 Replies
Apr 12, 2011
I want to know if anyone knows where I can get a free template that can manage this effect[code]...
If not, can this be done using just ActionScript?
I want this so that I can use it as a screensaver. I'm not graphically inclined, otherwise I would make it myself.
Or, heck, does anyone know of any screensavers floating around that offer this?
View 2 Replies
Nov 20, 2010
I have this template that i am modifying [URL] Photo gallery i am trying to use[URL] when you click on any of the images the site reframes and then you see a xml text box i want to replace that xml text box with an xml photogallery but i am not really familiar with the language and its been a long time since i did any web work.
View 1 Replies
Jun 3, 2011
I have two questions (I'm a photographer and flash novice):
1) I just bought this flash template (URL...) and I need to edit it. Rewriting the text is easy, I just rewrite it in XML files, but I cant figure out how to change the font, font color and font size. Could somebody tell me how to do it?
2) I also bought this template (URL...) and I cant figure out how to edit name in the header and text in the top menu. I really cant find it anywhere (I dont see it in Adobe Flash and I dont see any jpeg or PSD file in the flash directory...)
View 11 Replies
Feb 1, 2010
I just purchased a flash template and can not seem to find where I place the logo. The template now has a logo in text, but I want to replace it with an image.
View 5 Replies
Nov 10, 2010
I am new to flash and i have .fla file of flash.i want to edit this file to use it.I want to change the buttons name and their hyperlinks in this fileI want to attach the .fla file with post but i don't know how to do this.
View 3 Replies
Feb 24, 2011
I am building an application template in FlashDevelop/Flash, to be used as the template for all our future projects. In a swc-free world, the template has a bunch of library symbols and a whole package of classes in the /lib/ folder that run the whole thing.
What I would like to do, is package all that up into a single swc, so the team can checkout the latest build of the swc from svn at the start of a project, put it in the /lib/ folder and forget about it.
However, all attempts to do this have failed so far. Is it even possible to put everything into one swc?
View 1 Replies
Jul 14, 2011
I am using a flash template with an xml file. I am trying to replace an image with a .swf file. Is this possible? And what tags do i use to replace the line below with a flash .swf in place of it?
<image url="images/pic3.jpg">
I just want it to be a flash movie on top of a flash movie instead of a pic.
View 0 Replies
Apr 16, 2009
I tried to search but was unable to find. Just to see if I was publishing incorrectly I took a stock flash 8 template and uploaded it to my server putting all files and directories exactly as they were on the local version. Same result as my published version. Works perfect on my pc when I click the index.html file. All loads smoothly and template works perfectly.But when I load the same template onto the server via filezilla (all loads fine and the file sizes appear to all be correct). All I get is blank page on screen and says done in bottom of page. (Mozilla)SO, on IE I get page error and nothing loads. On mozilla I get nothing at all just blank page and at the bottom it says done?
So I guess what I am asking is: Is there something that I am missing when uploading a flash8 template straight out of the box. No edits no changes just upload to see how it looks from the server?NOTE: On same server I loaded a FULL FLASH template that I even made some edits on and loaded it partially finished and it worked fine. The other template in question is a flash banner template I tried from the free downloads section of template monster (Its the one with the green apple split into sections and stacked off center) couldnt find a name for it or template number
View 1 Replies
Jun 23, 2009
Immediately after finding out I was laid off I began to try and increase my online presence by building a webpage.I found a flash web template that I was able to highly customize however I can't figure out how to add additional hyperlinks, images, etc. This crosses the line between dreamweaver and flash. The flash file is a complied file that flash creates and I can only edit it if I have all the original files (kinda, there are other ways around that). Anyways, I have all the files, I think however I still can't seem to figure it out.
I would like to add additional images, hyperlinks, and maybe even move some stuff around however it seems like everything is either locked down of difficult to modify. I have looked around online for some good tutorials however I can't seem to find any that match what I'm trying to do. Would it be best to try and build the hyperlinks in flash or should I do that in dreamweaver? Dreamweaver I'm guessing, however since I'm editing the site via .xml the insert hyperlink capabilities within dreamweaver are not enabled unless I'm directly editing the index.html. By the way, I'm using CS4 Flash and Dreamweaver. [URL].
View 3 Replies
Oct 19, 2009
I have never messed around with flash before so I downloaded a template. I open it with Flash CS4 and most everything is simple to edit. The problem is I dont seem to find anything about editing the menu/navigation bar.
View 1 Replies
Mar 21, 2010
I have Flash MX and I'm editing a Flash template that I downloaded. When I roll over what would be the button section in this template it is set up to be a link, but I don't know how to edit it and add the links I want. how I can get links added into this thing? I can send it to you if you want to see what I'm talking about first hand.
View 5 Replies
May 13, 2010
So I have basic flash knowledge but not to much. I'm editing the majority of the template perfectly. When I want to test out how the changes are I export the it into a flash movie, than click on the index.html (which is linked to the flash movie) everything works fine.
Here is where the problem comes in, on one of the pages the template had a bunch of link that I do not want so I delete the links layer. When I do that and export the movie agian, everything gets screwed up it like flips out when I open the file and runs everything double speed than shuts down.
View 1 Replies
Jun 11, 2009
i need to change the animated logo's color in the left from green to blue.I have never done anything in flash before, this is the first time i've used the program, but so far i was able to figure out how to change the navigation and bar color and the text. but i can't seem to see where the color of this logo is coming from....
In screentshot 1 you can see that the Logo_Anim is made up of the Logo_1 - Logo_5 movie clips.Each of the logo_# clips is a piece of the logo.I'm not sure if something in the Logo_Anim is controlling the change in color of each piece of the logo, but it doesn't seem like the indiviual logo_#'s have any kind of setting..
View 3 Replies
Aug 23, 2009
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview.how to edit and replace these files within the flash movie?
View 1 Replies
Jul 11, 2010
i am new to Flash and am currently working with an XML based flash template. When i open the .fla file, none of the text or images show up. I understand this is b/c i have to edit the xml file in dreamweaver. However that is a very complicated way of doing it b/c then i have to keep going back and forth between several programs and saving, and updating, and never getting of "live view" of the chages i am making. My question is: Is there really no way for me to edit the whole xml flash template in Flash CS5? Meaning is there some sort of way to import or manipulate the files so that i can edit the text and images directly in flash pro cs5 and not having to keep going into dreamweaver?
View 3 Replies
Jan 2, 2011
I purchased a premade Flash template last night that is almost perfect for what I need right out of the box.The template is divided into 2 sections, the top being the flash portion and the bottom HTML editable The problem I am running into is editing the the buttons. When I dbl click the menu icons it just keeps jumping back and forth between layers, never allowing me the chance to alter the text.I can upload the SWF file if that would help.
View 5 Replies
May 11, 2011
I wonder if it's possible to use Flash/AS files as "templates" - in other words, we have the website [URL] and the header is subject to change depending on the product-category you click in the shop. We will have approx 10 categories, and each will have a different product displayed in the flash movie, but the "background actions" should stay the same.
Now, in case I need to change something (let's say the logo changes from blue to red.. and the particle-size and shape) I don't want to change all 10 or more files again. So is there a way to use the "basic" flash file as template, which means - position of the Logo & shadow, and the particle code, and just change the variable pictures and stuff inside the categories? I took that red card-printer as sample of the card-printer category for example.
View 1 Replies
Feb 3, 2011
I've been playing with this cool template and I'm trying to figure out on how to add another page and link it. Looking at the actionscript below
for (var i = 1; i<=5; i++) {
var butNum = _root.menu["b"+i];
var butNum2 = _root.footer["b"+i];
[Code]....
View 2 Replies
Dec 30, 2010
I'm working on a flash template from templare monster. The thing is that when i open the .HTML file of the templare (which call for the .swf file) everything works fine. Even the contact form. But when i open the .fla file And wihtout make changes i export the .swf ( or publish it) everything works cine except the contact form. And with that i mean i cant write in it. Even i cant write numbers.The files of configuration And structure(.XML) aré loares properly And the contact (php & asp) files too. [URL]
View 1 Replies
Dec 31, 2010
I'm working on a flash template, and when I publish the site, the loader dosnt work. I check the code in the actions menu of the .fla and I can't find an error. This is the code.
onClipEvent (load) {
total = _root.getBytesTotal();
} onClipEvent (enterFrame) {
loaded = _root.getBytesLoaded();
percent = int(loaded / total * 100);
text = percent + "%";
gotoAndStop(percent);
if (loaded == total) {
_root.gotoAndPlay(4);
} // end if }
This is the complete flash template. with the .fla and all the files. [URL]
View 2 Replies
Feb 4, 2011
I'm working in another template, and i have this problem with the gallery.I need more than the 10 pictures on that template, but i really don't know how to add another picture to the website.
the thing is the gallery is the website (more or less) and i can't find the way to add another picture to the gallery.
View 1 Replies
Jan 7, 2010
i am using a flash template with xml file.i have to made a link here
Code:
<image imageUrl="_pic1.png" link="asfunction:_root.more_click_func, termsofuse"/>
<image imageUrl="_pic2.png" link="#"/>
<image imageUrl="_pic3.png" link="#"/>
i would link to link this to an interne part of the flash wich is already linked in the flash menu, but i can't !the xml function is :
Code:
function more_click_func(number) {
tempNumber = number.split(" ");
number=tempNumber.join("");
[code]....
I tried something like :
Code:
function test_link(string) { _root.gotoAndPlay("s1"); }
and
<image imageUrl="_pic1.png" link="asfunction:_root.test_link"/>
but it didn't work !
View 6 Replies
