I'm working in another template, and i have this problem with the gallery.I need more than the 10 pictures on that template, but i really don't know how to add another picture to the website.
the thing is the gallery is the website (more or less) and i can't find the way to add another picture to the gallery.
I have created a flash gallery using the in built template in Flash8, which works fine. The gallery forms part of my gallery page of a separate SWF flash site. I load the gallery using a loder component. Since the gallery navigation works by targeting the root folder, my site gets screwed up. The question is, how do i modify the ActionScript in the gallery.fla file (flash inbuilt template), so that once loaded into the main site, it doesnt target the root timeline, but targets its own timeline i.e.Please see below for the code in the Flash Gallery. PS: I didnt write the code - its inbuilt into the template:
function updateFrame (inc) { // send slides to new frame newFrame = _level1._currentFrame + inc; _level1.gotoAndStop(newFrame);
updateStatus();
[code]......
I bought a template. xml flash. able to change anything in that. I had trouble, but the gallery section. I met with template-help. did not help. I want my products section of the text when I click on the menu on the left side there are three. I want to get these categories. When I want to come to each of the other galleries. but somehow could not.
View 3 RepliesI've pretty much taught myself everything about editing html so far, but this one is loosing me quickly. I've downloaded a html css template, edited out the fat i don't need, so on and so forth, now all I need is a photo gallery. However, I'm not sure how to embed the flash template to get it to run. I'm trying to use a sliding gallery, but can't seem to get it.
View 1 Repliesit has interactive picture gallery where you roll over with the mouse and click on the desired photo to see it on bigger size. I would like to replace the big photos with videos of my showreel. you can go and check it out: [URL]. Flash only allows me to exchange for the same file this case pictures.
View 6 Repliesi bought a template and have edited too my satisfaction,however i am unable to add more pics to the gallery,i can add frames and pics in the pics/thumbs timeline, but they do not showi can change the 12 pics in the original timeline without difficulty, but cannot find anyway to add more pics or thumbs.i have been trying to sort this for a week with no joy, i would really appreciate any help that i can get on this, any at all.i did post the .FLV file on the adobe server Case #0181222772
View 7 RepliesIf you make multiple flash files from the same template and then edit that template, will all those files have those same changes? If not, is there a way to make the same change on multiple files at once? Basically the same idea as linking HTML files to a single CSS file...
View 1 RepliesI'm pretty new to Flash and especially to Action Script, which is why I thought customizing a pre-existing template would be a good way to learn, so I recently downloaded a free Flash Template that uses XML and AS3. I was able to customize almost all of it, but having one major difficulty translating some of the code.[URL]..So at the top, I just wanted to convert the Contact US & Our Company tabs into 2 more galleries. I have created XML files for each and tested them within the other galleries and they appear to work ok, but when I tried to assign them each to their own page I get an error.
[Code]...
I am working on a site and I'm using template for the gallery. It's being loaded with a loader component and an external swf file...
Everything is fine on the flash movie until I actually get to the gallery section and the template resizes the entire page!
Jesus Christ - I thought I was really good in flash.Got this template and I can't see S***.
WTH - is it supposed to be this difficult to manipulate a template or am I stupid???
Go into project explorer and can't see much AS so how the hwll are they getting the images and text into the flash swf. By the html??? I don't think so.
I just pulled together a picture gallery, where the pictures simply scroll across the screen using arrows. I used the template from [URL] The problem is that when I added my own pictures, the graphic symbol was obviously a different size from the original template. So when the images scroll they should stop at a certain point as to not show any empty space. I changed the values that i guessed were the ones setting up where the graphic has to stop at, but it doesnt seem to be doing anything. The code below is the only script of any importance, at least that I know of. The other stuff just points to targets and gotoandplay stuff.
View 3 RepliesI want to know if anyone knows where I can get a free template that can manage this effect[code]...
If not, can this be done using just ActionScript?
I want this so that I can use it as a screensaver. I'm not graphically inclined, otherwise I would make it myself.
Or, heck, does anyone know of any screensavers floating around that offer this?
I have this template that i am modifying [URL] Photo gallery i am trying to use[URL] when you click on any of the images the site reframes and then you see a xml text box i want to replace that xml text box with an xml photogallery but i am not really familiar with the language and its been a long time since i did any web work.
View 1 RepliesI have two questions (I'm a photographer and flash novice):
1) I just bought this flash template (URL...) and I need to edit it. Rewriting the text is easy, I just rewrite it in XML files, but I cant figure out how to change the font, font color and font size. Could somebody tell me how to do it?
2) I also bought this template (URL...) and I cant figure out how to edit name in the header and text in the top menu. I really cant find it anywhere (I dont see it in Adobe Flash and I dont see any jpeg or PSD file in the flash directory...)
I just purchased a flash template and can not seem to find where I place the logo. The template now has a logo in text, but I want to replace it with an image.
View 5 RepliesI am new to flash and i have .fla file of flash.i want to edit this file to use it.I want to change the buttons name and their hyperlinks in this fileI want to attach the .fla file with post but i don't know how to do this.
View 3 RepliesI am building an application template in FlashDevelop/Flash, to be used as the template for all our future projects. In a swc-free world, the template has a bunch of library symbols and a whole package of classes in the /lib/ folder that run the whole thing.
What I would like to do, is package all that up into a single swc, so the team can checkout the latest build of the swc from svn at the start of a project, put it in the /lib/ folder and forget about it.
However, all attempts to do this have failed so far. Is it even possible to put everything into one swc?
I am using a flash template with an xml file. I am trying to replace an image with a .swf file. Is this possible? And what tags do i use to replace the line below with a flash .swf in place of it?
<image url="images/pic3.jpg">
I just want it to be a flash movie on top of a flash movie instead of a pic.
I've made a gallery slideshow before but wasn't as intuitive looking back at it now and I want to start fresh on this new project. I would like to convert a jQuery lightbox style gallery into a flash XML based AS3 image gallery with categories. I don't want to code the FLA, I want separate AS files.
This is a school project for my website. I would use jQuery and I have more experience with it but this project needs a flash component. I'm just not sure where to start and looking for some advice on how and where I could find resources. I want it to be minimal as I can make it;
- 8 thumbnails to a "page/section" with more flowed into page 2 or 3 etc. (or a srcoller)
- a few buttons for categories
- images fading in full size with a description when hovered over and a close button
- preloader (simple bar)
Esentially something like this > http:[url].........works which is using http:[url].... for the thumbnails. That might be ambitious but I'd suffice with a simple fade effect.I've downloaded some galleries out there but most of the code is messy or outdated.http:[url]... this is alright, but all the code is done in the FLA. I might break it into AS files but it depends.
I tried to search but was unable to find. Just to see if I was publishing incorrectly I took a stock flash 8 template and uploaded it to my server putting all files and directories exactly as they were on the local version. Same result as my published version. Works perfect on my pc when I click the index.html file. All loads smoothly and template works perfectly.But when I load the same template onto the server via filezilla (all loads fine and the file sizes appear to all be correct). All I get is blank page on screen and says done in bottom of page. (Mozilla)SO, on IE I get page error and nothing loads. On mozilla I get nothing at all just blank page and at the bottom it says done?
So I guess what I am asking is: Is there something that I am missing when uploading a flash8 template straight out of the box. No edits no changes just upload to see how it looks from the server?NOTE: On same server I loaded a FULL FLASH template that I even made some edits on and loaded it partially finished and it worked fine. The other template in question is a flash banner template I tried from the free downloads section of template monster (Its the one with the green apple split into sections and stacked off center) couldnt find a name for it or template number
Immediately after finding out I was laid off I began to try and increase my online presence by building a webpage.I found a flash web template that I was able to highly customize however I can't figure out how to add additional hyperlinks, images, etc. This crosses the line between dreamweaver and flash. The flash file is a complied file that flash creates and I can only edit it if I have all the original files (kinda, there are other ways around that). Anyways, I have all the files, I think however I still can't seem to figure it out.
I would like to add additional images, hyperlinks, and maybe even move some stuff around however it seems like everything is either locked down of difficult to modify. I have looked around online for some good tutorials however I can't seem to find any that match what I'm trying to do. Would it be best to try and build the hyperlinks in flash or should I do that in dreamweaver? Dreamweaver I'm guessing, however since I'm editing the site via .xml the insert hyperlink capabilities within dreamweaver are not enabled unless I'm directly editing the index.html. By the way, I'm using CS4 Flash and Dreamweaver. [URL].
I have never messed around with flash before so I downloaded a template. I open it with Flash CS4 and most everything is simple to edit. The problem is I dont seem to find anything about editing the menu/navigation bar.
View 1 RepliesI have Flash MX and I'm editing a Flash template that I downloaded. When I roll over what would be the button section in this template it is set up to be a link, but I don't know how to edit it and add the links I want. how I can get links added into this thing? I can send it to you if you want to see what I'm talking about first hand.
View 5 RepliesSo I have basic flash knowledge but not to much. I'm editing the majority of the template perfectly. When I want to test out how the changes are I export the it into a flash movie, than click on the index.html (which is linked to the flash movie) everything works fine.
Here is where the problem comes in, on one of the pages the template had a bunch of link that I do not want so I delete the links layer. When I do that and export the movie agian, everything gets screwed up it like flips out when I open the file and runs everything double speed than shuts down.
i need to change the animated logo's color in the left from green to blue.I have never done anything in flash before, this is the first time i've used the program, but so far i was able to figure out how to change the navigation and bar color and the text. but i can't seem to see where the color of this logo is coming from....
In screentshot 1 you can see that the Logo_Anim is made up of the Logo_1 - Logo_5 movie clips.Each of the logo_# clips is a piece of the logo.I'm not sure if something in the Logo_Anim is controlling the change in color of each piece of the logo, but it doesn't seem like the indiviual logo_#'s have any kind of setting..
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview.how to edit and replace these files within the flash movie?
View 1 RepliesI purchased a template from a website (Dreamline Studio) and have downloaded the included files. I have Adobe Design Premium CS4 loaded on my computer. Now that the files are saved to my computer, how do I actually start trying to make edits to this template? I tried to open the file(s) in Flash but it keeps saying that its an unexpected file type. I downloaded all recent updates from Adobe to make sure I had the latest releases for CS4 but this did not . I'm sure this is simple and I am excited to actually begin learning Flash, but for the life of me - I just can't figure out how to GET STARTED
View 1 Repliesi am new to Flash and am currently working with an XML based flash template. When i open the .fla file, none of the text or images show up. I understand this is b/c i have to edit the xml file in dreamweaver. However that is a very complicated way of doing it b/c then i have to keep going back and forth between several programs and saving, and updating, and never getting of "live view" of the chages i am making. My question is: Is there really no way for me to edit the whole xml flash template in Flash CS5? Meaning is there some sort of way to import or manipulate the files so that i can edit the text and images directly in flash pro cs5 and not having to keep going into dreamweaver?
View 3 RepliesI purchased a premade Flash template last night that is almost perfect for what I need right out of the box.The template is divided into 2 sections, the top being the flash portion and the bottom HTML editable The problem I am running into is editing the the buttons. When I dbl click the menu icons it just keeps jumping back and forth between layers, never allowing me the chance to alter the text.I can upload the SWF file if that would help.
View 5 RepliesI wonder if it's possible to use Flash/AS files as "templates" - in other words, we have the website [URL] and the header is subject to change depending on the product-category you click in the shop. We will have approx 10 categories, and each will have a different product displayed in the flash movie, but the "background actions" should stay the same.
Now, in case I need to change something (let's say the logo changes from blue to red.. and the particle-size and shape) I don't want to change all 10 or more files again. So is there a way to use the "basic" flash file as template, which means - position of the Logo & shadow, and the particle code, and just change the variable pictures and stuff inside the categories? I took that red card-printer as sample of the card-printer category for example.