I bought a template. xml flash. able to change anything in that. I had trouble, but the gallery section. I met with template-help. did not help. I want my products section of the text when I click on the menu on the left side there are three. I want to get these categories. When I want to come to each of the other galleries. but somehow could not.
View 3 RepliesI am working on a site and I'm using template for the gallery. It's being loaded with a loader component and an external swf file...
Everything is fine on the flash movie until I actually get to the gallery section and the template resizes the entire page!
I'm working in another template, and i have this problem with the gallery.I need more than the 10 pictures on that template, but i really don't know how to add another picture to the website.
the thing is the gallery is the website (more or less) and i can't find the way to add another picture to the gallery.
I have created a flash gallery using the in built template in Flash8, which works fine. The gallery forms part of my gallery page of a separate SWF flash site. I load the gallery using a loder component. Since the gallery navigation works by targeting the root folder, my site gets screwed up. The question is, how do i modify the ActionScript in the gallery.fla file (flash inbuilt template), so that once loaded into the main site, it doesnt target the root timeline, but targets its own timeline i.e.Please see below for the code in the Flash Gallery. PS: I didnt write the code - its inbuilt into the template:
function updateFrame (inc) { // send slides to new frame newFrame = _level1._currentFrame + inc; _level1.gotoAndStop(newFrame);
updateStatus();
[code]......
I've pretty much taught myself everything about editing html so far, but this one is loosing me quickly. I've downloaded a html css template, edited out the fat i don't need, so on and so forth, now all I need is a photo gallery. However, I'm not sure how to embed the flash template to get it to run. I'm trying to use a sliding gallery, but can't seem to get it.
View 1 Repliesit has interactive picture gallery where you roll over with the mouse and click on the desired photo to see it on bigger size. I would like to replace the big photos with videos of my showreel. you can go and check it out: [URL]. Flash only allows me to exchange for the same file this case pictures.
View 6 RepliesI am using a web template for a client that contains a flash header. Images and text can be changed with a data.txt file and image replacement. However I also need to change the colors of the button backgrounds and one of the display fields...I have macromedia flash 8, the fla and swf files.
I work in expressions a lot and not in dreamweaver or macromedia 8; I've opened the files in M8, but this is totally over my head right now.
I am colorblind.I need to change either the color of the background or the color of the text on the layers section on the Timeline.I simply cannot read/see what is currently showing.It is a very light blue background with white text and white dots for seeing, locking, or setting the outline color.I need to either change the text color and dots to black so I can see them, or try to change the background color to a dark blue so I can read the white text.Changing the text color would really be my preference. Adobe hasn't been very concerned about colorblindness when developing these products. I can barely make out all the light grey/grey/dark grey/grey stuff.
View 7 RepliesI am editing my website, a full flash site bought from Template Monsters and it seem there is a problem with screen resolution. When i publish the fla in flash only, it fits the screen exactly with no scroll bar but when i publish in html the flash content is bigger than screen size and menu bar stays outside the screen in the way that i have to scroll down to see menu contents and tabs.In order to make this site more user friendly I have tried to resize the screen to a smaller but seems to be not a good idea. I have also tried to use different .js and includes in order to solve the problem but still not giving the result i am looking for.
View 5 Replieswhen I compile my action script project in Flash Builder 4 it creates a html wrapper file based on index.template.html in my html-template folder. That file automatically gets the name of my project or main application (project name.html). But usually I want it to have the name index.html
View 1 RepliesI wanted to use your gallery tut to create my own gallery for my website [URL] But I need to add a simple album section, how could I do that. For example you click on a textlink beside the gallery and the gallery will be filled with the images from the album, and if I add a new album folder this folder should appear
as a link beside the gallery. [URL]
i bought a template and have edited too my satisfaction,however i am unable to add more pics to the gallery,i can add frames and pics in the pics/thumbs timeline, but they do not showi can change the 12 pics in the original timeline without difficulty, but cannot find anyway to add more pics or thumbs.i have been trying to sort this for a week with no joy, i would really appreciate any help that i can get on this, any at all.i did post the .FLV file on the adobe server Case #0181222772
View 7 RepliesIf you make multiple flash files from the same template and then edit that template, will all those files have those same changes? If not, is there a way to make the same change on multiple files at once? Basically the same idea as linking HTML files to a single CSS file...
View 1 RepliesI'm pretty new to Flash and especially to Action Script, which is why I thought customizing a pre-existing template would be a good way to learn, so I recently downloaded a free Flash Template that uses XML and AS3. I was able to customize almost all of it, but having one major difficulty translating some of the code.[URL]..So at the top, I just wanted to convert the Contact US & Our Company tabs into 2 more galleries. I have created XML files for each and tested them within the other galleries and they appear to work ok, but when I tried to assign them each to their own page I get an error.
[Code]...
I want to say that the code I am working with is the same found here: [URL] The code is working perfectly (pictures are displaying) when opening the file, work_diesel.swf by itself. However, my problems occur when I open default.swf, and then navigating to the section work. From there I hit advertising, and in that section DIESEL. HERE is where the problem is visible. The pictures are not loading AT ALL when doing it this way (the correct and final way).
I am just wondering if anyone can pin point the problem for me so I can change it. It must be said that the work_diesel.swf is loading from an external source into default.swf.
Jesus Christ - I thought I was really good in flash.Got this template and I can't see S***.
WTH - is it supposed to be this difficult to manipulate a template or am I stupid???
Go into project explorer and can't see much AS so how the hwll are they getting the images and text into the flash swf. By the html??? I don't think so.
I just pulled together a picture gallery, where the pictures simply scroll across the screen using arrows. I used the template from [URL] The problem is that when I added my own pictures, the graphic symbol was obviously a different size from the original template. So when the images scroll they should stop at a certain point as to not show any empty space. I changed the values that i guessed were the ones setting up where the graphic has to stop at, but it doesnt seem to be doing anything. The code below is the only script of any importance, at least that I know of. The other stuff just points to targets and gotoandplay stuff.
View 3 Repliesi have posted last time on how to scale using as.what i mean is...take a look at [URL], the content box change into different size when clicked on the other section.i tried to do something like that few times but it just didn't work.
View 14 RepliesIm a relative novice in Flash and Im used to working in CS3. However, I am trying out CS4 to do a change a template that a client bought. Everything is going smoothly for the most part.However, I am not able to change the tab names on the template that she wants. I expected for the text to be on its own layers as seperate rollovers, but I guess somehow they are nested within the button shapes and I cannot locate them. I've been trying to change them for the past 2 days and I have had no luck thus far.I know you guys are some of the best when it comes to Flash. Here is the working template and what I have done thus far. I was able to change the girl's eye color from blue to dark brown and change the default title that came with the template to the name of her business:
View 9 RepliesI have a button that I would like to use with the basic actionscript as follows:
on (release) {
this.gotoAndPlay("15");
}
What I would like it to do is play a section on the timeline and then move onto another section or scene.
[Code]....
I know this is incorrect, so would anyone know how to write an actionscript button that plays a section then goes somewhere else?
I am creating an image gallery and the images change but change right back to the original image. I had it working yesterday but today it doesn't work.
[Code]...
I have the foling template: [URL] But i need to change the foling link: [URL] to another page. So when i click on the link,i need to open a page inside, like page one, or page number two, to have the same fuction like the menus above.
View 0 RepliesI have a website template in which I am trying to change the header text words and menu text words to customize the template. How do I do this in Flash CS4?
View 4 RepliesThe normal structure is:
project/
bin-debug
html-template
libs
src
I want to change it to:
project/
bin-debug
flash/
html-template
libs
src
I know how to change the libs and src folders, but not html-template. Is it possible?
I have a flash site that I'm working with that has an xml photo gallery as one of it's menu items. the photo gallery has three pages, all three containing thumbnail images that once clicked, load the larger image. The larger image dissolves in covering the page with the image. Once you click the larger image it dissolves out returning you to the gallery.
What I want to to do is to change the first page of this gallery to a video gallery, or player, leaving the other two galleries as image galleries. I tried simply replacing the images listed in the xml document to flv files and the flv file does not load. I simply want to know what it is I need to do in order to change this one page so that I can embed videos on it.
I've attached the Action script that loads the xml gallery in .txt format
on [URL] what is the word 'section' in _root.section? I assume it is a movie clip instance, but can't seem to find it on the timeline.
View 2 RepliesIf i have a huge website, and i want to be able to change the "news" section without FIXING the whole .fla and exporting, and uploading it, would it be possible to do this without all of this stuff. can this be done through passwords, inputting text boxes, and dynamic text boxes?
View 1 Replieshow to change the Gallery names.
View 5 RepliesI am going to redesign a website and for that website I want there to be a news section on the homepage. The news section should be built in Flash with images representing news headlines animating on a loop however a user should be able to click one of these images and then within the homepage a Flash pop up will appear with the news article. This is similar to sites that have an image gallery with thumbnails of images but when an thumbnail is clicked then the full size image loads within the same webpage. I want a similar effect but in my case, when a full size image is clicked, a text based news article loads.
View 1 RepliesI had this post in the flash mx section but once it came down to studying the code I got no replies so i'll post my question here now instead
My random movement works file when on _root but I have it loading on level18 now. I have changed the code accordingly (all _root to _level18) but it still leaves the boundary.
[Code]...