I am working on a site and I'm using template for the gallery. It's being loaded with a loader component and an external swf file...
Everything is fine on the flash movie until I actually get to the gallery section and the template resizes the entire page!
I bought a template. xml flash. able to change anything in that. I had trouble, but the gallery section. I met with template-help. did not help. I want my products section of the text when I click on the menu on the left side there are three. I want to get these categories. When I want to come to each of the other galleries. but somehow could not.
View 3 RepliesI'm using a crossfading gallery with images 500x330px real size.
The movie window itself has this size, so it's OK. However, the photos inside the window are smaller and there's an unused black space around them (right and bottom)! I just can't figure out why they get resized smaller.
The XML code:
PHP Code:
<gallery timer="2.3" order="random" fadetime="1.2" looping="yes" xpos="0" ypos="0"><image path="images/01.jpg" width="500" height="330" /><image path="images/02.jpg" width="500" height="330" /><image path="images/02.jpg" width="500" height="330" /></gallery>
[Code].....
I'm using a crossfading gallery with images 500x330px real size. The movie window itself has this size, so it's OK. However, the photos inside the window are smaller and there's an unused black space around them (right and bottom)! I just can't figure out why they get resized smaller.
[Code]...
Flash Gallery that resizes the image before it gets loaded?
View 2 RepliesI have an invisible movie clip I want to go to the NEXT page, as it goes to that page, I want it to essentially remove itself (page1.swf). e.g. page1.swf (contains fancy.swf - [AS2], 4 images, several invisible MCs with code) has an invisible MC + on click = remove page1.swf.
To be clear, this does work. It goes to page2.swf and page2.swf goes to page1.swf as it should. The issue is that if the user repeatedly does this (just 2 or 3 times) the fancy.swf becomes impossible to control and Flash (CS5) crashes. I think this is due to the fact it's not unloading the entire thing, it's only unloading fancy.swf on click (I hope). So underneath page2.swf is page1.swf, and when the user clicks back to page1.swf, page2.swf AND page1.swf are underneath that, and so on and so forth.
[Code]...
i'm trying to build a flash site and ran into a problem... i have a gallery page with a bunch of page numbers at the top. when you click on one, a movieclip loads of some images coming in.so the problem i'm having is that i made a little animation for when you roll the mouse over the page number (they scale up when the mouse is over, scale back when the cursor moves away)... what it's doing is when you roll over, it goes to a certain frame in the timeline and plays that animation.that's all working cool, but i need it to not do that once it's clicked on. so basically when you actually click on a page number, the over script should stop until you go to another page... here's the code i've written,
function over(event:MouseEvent):void {
this.gotoAndPlay(30);}
function out(event:MouseEvent):void {[code].....
i am trying to make this xml gallery that dynamically resizes according to the picture's width & height. the function resizer() is hardcoded with fix values. i have tried to assign it from the array like below but it works wierd, the border just keep increasing in size.
Code:
menuHolder["but"+i].onRelease = function() {
imageLoader.loadClip(this.path,gallery.imageHolder);
gallery.imageBorder.tween("_width",this.width,1,"easeOutExpo");
[code]....
Click a button in a flash file and an iframe in the same page resizes.
View 1 RepliesI wanted to use your gallery tut to create my own gallery for my website [URL] But I need to add a simple album section, how could I do that. For example you click on a textlink beside the gallery and the gallery will be filled with the images from the album, and if I add a new album folder this folder should appear
as a link beside the gallery. [URL]
i bought a template and have edited too my satisfaction,however i am unable to add more pics to the gallery,i can add frames and pics in the pics/thumbs timeline, but they do not showi can change the 12 pics in the original timeline without difficulty, but cannot find anyway to add more pics or thumbs.i have been trying to sort this for a week with no joy, i would really appreciate any help that i can get on this, any at all.i did post the .FLV file on the adobe server Case #0181222772
View 7 RepliesI'm working in another template, and i have this problem with the gallery.I need more than the 10 pictures on that template, but i really don't know how to add another picture to the website.
the thing is the gallery is the website (more or less) and i can't find the way to add another picture to the gallery.
I'm pretty new to Flash and especially to Action Script, which is why I thought customizing a pre-existing template would be a good way to learn, so I recently downloaded a free Flash Template that uses XML and AS3. I was able to customize almost all of it, but having one major difficulty translating some of the code.[URL]..So at the top, I just wanted to convert the Contact US & Our Company tabs into 2 more galleries. I have created XML files for each and tested them within the other galleries and they appear to work ok, but when I tried to assign them each to their own page I get an error.
[Code]...
I have created a flash gallery using the in built template in Flash8, which works fine. The gallery forms part of my gallery page of a separate SWF flash site. I load the gallery using a loder component. Since the gallery navigation works by targeting the root folder, my site gets screwed up. The question is, how do i modify the ActionScript in the gallery.fla file (flash inbuilt template), so that once loaded into the main site, it doesnt target the root timeline, but targets its own timeline i.e.Please see below for the code in the Flash Gallery. PS: I didnt write the code - its inbuilt into the template:
function updateFrame (inc) { // send slides to new frame newFrame = _level1._currentFrame + inc; _level1.gotoAndStop(newFrame);
updateStatus();
[code]......
It there any way of displaying videos on a website that would allow me to show just a clip of a video without physically slicing the file into actual clips? Specifically, I'd like to play the clips using an open source flash player. I could make specific clips, but that is time consuming and a maintenance nightmare.youtube won't work because it is very important we be able to control who views these videos. Also, this web application is running off of a classic LAMP stack.
View 6 RepliesI want to say that the code I am working with is the same found here: [URL] The code is working perfectly (pictures are displaying) when opening the file, work_diesel.swf by itself. However, my problems occur when I open default.swf, and then navigating to the section work. From there I hit advertising, and in that section DIESEL. HERE is where the problem is visible. The pictures are not loading AT ALL when doing it this way (the correct and final way).
I am just wondering if anyone can pin point the problem for me so I can change it. It must be said that the work_diesel.swf is loading from an external source into default.swf.
I was recently given the task of creating the webpage for my school's physics department. I want to recreate a textbook where you would actually have to flip the page to get to the next section. While searching the net, I found exactly what I was looking for.
link
How on earth can I recreate that effect? I know it has somethning to do with rotations and dragging a mask with the mouse but how?
I've pretty much taught myself everything about editing html so far, but this one is loosing me quickly. I've downloaded a html css template, edited out the fat i don't need, so on and so forth, now all I need is a photo gallery. However, I'm not sure how to embed the flash template to get it to run. I'm trying to use a sliding gallery, but can't seem to get it.
View 1 RepliesI've been playing with this cool template and I'm trying to figure out on how to add another page and link it. Looking at the actionscript below
for (var i = 1; i<=5; i++) {
var butNum = _root.menu["b"+i];
var butNum2 = _root.footer["b"+i];
[Code]....
How do i refresh a frame or entire page by using actionscript 3 ?
View 1 RepliesI wanted to know if it was possible to have a transparent swf sit over the whole of a html page? Basically I want to have a standard html page and create say an insect crawling over it, is this possible? I know about swfObject but I can't seem to figure out how to make the swf full screen AND to still see the html?
View 1 RepliesI was wondering if anyone know if there is a Free flash template like the one Microsoft uses on their front page. I am new to Flash and have been trying for a good few hours to get this done.
View 1 Repliesi've got a fair bit of text i'm trying to keep on an internal page by just making each section a scrolling content box. So there are 3 buttons at the top, each 'scrolls' onto a new section and I would like the ability for it to scroll back too, hence using the tween class to do this. I've managed to set it up and each button goes to each 'page' fine in reading order, so to speak (1, 2, 3), but if I got to 1, 2 then back to 1 it will start from 0 on the x axis.
Basically what i'm wanting to do is set the tween from the current _x value. So if I go 1, 2, then back to one, it will take the current _x value from 2, and scroll the opposite direction back to one. I am using the following code on the buttons:
[Code]...
I am trying to transistion myself from AS 2.0 to AS 3.0. Everything is going really well except I am so confused about URLLoad & URLVariables.I've been trying to load external data via ASP and it does send back the variable I want, but that variable also has all the HTML of the page too.If someone can tell me what I'm doing wrong that would be great. If they can explain what's going on too, that would be a bonus Here's my code:
public class TestURL {
var MyRequest:URLRequest; var MyLoader:URLLoader ;
public function TestURL() { MyRequest = new
[code].....
I just pulled together a picture gallery, where the pictures simply scroll across the screen using arrows. I used the template from [URL] The problem is that when I added my own pictures, the graphic symbol was obviously a different size from the original template. So when the images scroll they should stop at a certain point as to not show any empty space. I changed the values that i guessed were the ones setting up where the graphic has to stop at, but it doesnt seem to be doing anything. The code below is the only script of any importance, at least that I know of. The other stuff just points to targets and gotoandplay stuff.
View 3 Repliesit has interactive picture gallery where you roll over with the mouse and click on the desired photo to see it on bigger size. I would like to replace the big photos with videos of my showreel. you can go and check it out: [URL]. Flash only allows me to exchange for the same file this case pictures.
View 6 Repliesi was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 RepliesI have a template that I want to modify. I want to add two subpages to a products page, and I don't know how to do it. The site is: [URL]. I tried with simple goto but it generates errors. I think of loading a swf when you click on the sub-buttons but that doesnt work too.
View 0 RepliesI have a button that I would like to use with the basic actionscript as follows:
on (release) {
this.gotoAndPlay("15");
}
What I would like it to do is play a section on the timeline and then move onto another section or scene.
[Code]....
I know this is incorrect, so would anyone know how to write an actionscript button that plays a section then goes somewhere else?
on [URL] what is the word 'section' in _root.section? I assume it is a movie clip instance, but can't seem to find it on the timeline.
View 2 Replies