i would like to have a dynamic text that loads text from a *.txt file. This i know how is done, but the problem appears when i want the text-field to roll over the screen, as a motion tween. To be more specific it must be used for an infoboard, and people shold be able to change the "guests_today.txt" and then the guest list should roll over the display, over and over again.
View 1 RepliesIs it just me or is creating and applying custom easing with the motion editor absurdly difficult? Firstly, the bezier curve tool for custom easing has a mind of its own. It will change the curve at a different anchor point to the one you're editing on a whim and every time you get close to where you want the curve it does it again and you're back to square one. Second, you have to recreate a custom ease for every tween as there's no way to save them. It's impossible to create two custom eases exactly the same! The entire motion editor seems designed to infuriate me and parts of it don't seem to have been tested at all.
View 15 RepliesI hav created 24 frames (i use 24fps) by hand depicting a small move.Now I need to repeat this move for 1 minute and move it from left to right through the screen.is there a way to avoid copying-pasting these 24 frames and chaning them a little to the others 59 seconds by using motion tween?So, iam looking for a way to combine both the 24 frames and apply motion tween to them.
View 2 Repliesi want to apply tween motion on UIcomponents using actionscript in flex.
View 2 RepliesI want to apply a motion blur to the rotation of a movie clip. I am currently rotating the movie clip 540 degrees via actionscript using the tween class below:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
var targetRotate:Tween = new Tween(_root.target_mc, "_rotation", Regular.easeInOut, 0, 540, 3, true);
[Code] .....
This seems to be a good start, but I need to change it to apply to the _rotation of my movie clip. Lets say for the sake of argument, my movie clip has an instance name of target_mc as well.
how to apply a rotational motion blur to a movie clip using the Tween Class and Blur Filter? I have found info on bluring an animation this way, but only via the x or the y axis, not the rotaion.
View 1 RepliesHow i can import PNG sequence and apply blending mode to it? i import PNG sequence in timeline but it have 120 frames,if i want apply bleding mode to it, i have to apply 120 frames.it's not logical.
View 2 RepliesI have Flex Builder 3 and currently writing an Actionscript 3 program. I attempted to import fl.motion package in my program and it could not be found when I ran it. This is the first time I am importing the fl.motion. Is that package available to FlexBuilder 3 users.
View 2 RepliesBy typeing the text in the input box while staying on frame1, DOSEN'T show on the dymanic_text_box2 on frame 5?? How to make the dymanic_text_2 apply it's text when the text is been typed staying on frame 1?
View 3 RepliesI have a text field where user can type and few controls to customize the text properties like: font, size, color etc.If a user has typed say "Hello World", the caretindex is next to d of World. I want that if now the user makes some changes to the cusomization properties like: changes font size, then the text appearing next is of the font size set and not that of d. How can I do that?
View 1 RepliesI`m using flash cs3 for my works , but i have one problem!when i use File=> Import=> Import to Library... or Import to Stage...the flash environment becomes terminated.I changed my flash version to CS4 and I have this problem again.
View 2 RepliesDoes anybody know how to apply this text effect [URL](including the blinking underscore) to a text field that loads from an external .txt file.
View 6 RepliesI created a motion preset of a 3D text animation that made the text swing back and forth like a gate with the hinge on the far left side. However, when I apply the motion preset to other text, the text moves to a new location and the text swings closer to the center than the far left side. Moving the text only creates a travel path that further complicates matters.
what am I doing wrong with the motion preset? How can I save something into a preset and apply it to other things and have the animation work the way it was designed?
I'm working on a number of pages that load external text files with buttons.That part works fine and I had the text marked up with basic html but would rather use css....I'm trying to figure out how to apply the css to the text:
here is the css
Code:
@charset "UTF-8";
/* CSS Document */
VIDEO, P, STRONG, LENGTH {
[code]...
the text loads but isn't formatted by the CSS
a. is the css code valid?
b. what do I need to do to get it to apply to myTxt?
c. when I load new text does the CSS have to be 'reapplied'?
I want a xml text loaded in a normal textfield. I want to embedd the font to the textfield (so not in the xml file). I also want to add links to the xml text and change the look of the link with css. I just want a text file with links in it in Flash and want it to be possible to change it outside of flash so in a XML or text or html file i dont care. As long as I can make links in the text file without the ugly link stripe under the text (so it should be changeable with CSS).
View 10 RepliesI want to import an html file that contains just plain tet inside of a dynamic text box. The things that I have tried jus tmake the html file pop-up as a new page, but i want the information inside of that textbox.
View 2 RepliesWhen I import the text into a dynamic text field using URLLoader (and when I pasted it here) I get this: Praesent vestibu lum molestie lacus. Aenean nonummy hendrerit mau ris. Phasellus porta. Fusce suscipit varius mi. Cum sociis natoque penati bus et magnis dis parturient montes, nascetur ridiculus mus.
[Code]...
! I just did the Kirupa XML tutorial (for Flash MX) and ... I actually understand! But now I need to change a few things.. and I haven't got a clue. Right now, I know how to import text from an XML file into different text boxes. But, what I need to do, is be able to import text regardless of how many text boxes my FLA file has.
[Code]...
I have a text field that reads:"E 1-1"
can I apply two different colours to the text? "E" would be green, "1-1" would be black. Is it possible to do something like that through actionscript without creating two separate text fields?
I am using Flash Builder 4 to implement embedded text, what I would like to do is apply this embedded text to a text field in an external SWF (.fla file using Flash CS4).
My code is like so:
[Embed(source='//lib//fonts//Tahoma.ttf', fontName='_Tahoma', embedAsCFF="false")]
private var embedString:String; // added for embed font
var format:TextFormat = new TextFormat();
[Code]....
I have set the fontFamily of the dynamic text field inside the .fla to a custom font and have the AnitAlias set for readability. The Custom font is set to 'Tahoma'.
I have a project that is running a lot of classes.
I define the font in the document class and it's working perfectly on textFields inside the document class.
But how do I access and embed this font for textFields in other classes?
i want to apply some animation (like fly from left) to all the character of paragraph text.for this, i have created a movie clip with only one character (suppose "A") and done some animation like first it flies from left then it rotates and gets fade off and on.Now i have a paragraph in another movie clip and of course it contains lots of characters (more than 200) so it is not possible to apply same animation to all the characters individually making layers.
View 3 RepliesI have a clip containing 8 MCs, named id1, id2 etc, each of which contain a dynamic text field with the variable thisNo. I want to run a loop that inserts each digit from a randomly generated number into each of these MCsPatID is the random number, IDLength is it's character length.
for (i=1; i<(IDLength+1); i++) {
thisNo = PatID.substr(-i,1);
eval("id"+i).iconNo = thisNo;
[code].....
I found a thread on actionscript.org that showed a way to load functions from text in a dynamic text box. It works using "asfunction". I tried it and it worked.However, load that dynamic text into a TextArea component and it doesn't call the function anymore! Is there a way to do it?
View 3 Repliesive got a text resize function and i want to apply it to two buttons so they both execute the function.the function is..
_root.largeTextButton1.onRelease = function() {
resizeText(hometext,14);
}
and
_root.largeTextButton2.onRelease = function() {
resizeText(hometext,14);
}
is there anyway i can do somthing like...
_root.largeTextButton1 & largeTextButton2 .onRelease = function() {
resizeText(hometext,14);
}
I've seen that it's possible to format a specific bit of text in a text field with:setTextFormat(format:TextFormat, beginIndex:int = -1, endIndex:int = -1):void
I need to format a section of text by applying a texture to the rectangular fill space around the letters. (Imagine in Microsoft Word that you've written a short sentence and you highlight it. Then you fill the text background with a colour. Then imagine that that colour is a single repeating texture. That's what I'm trying to achieve.) Note that the text field must be multiline, and I'm not looking to fill the whole rectangular text field area. The applied texture needs to fit to each character. Is this possible in Actionscript? Would I need to use some kind of HTML or CSS formatting? Is it possible at all? If it is possible, is it possible to change the size of the fill area around the text?
i am trying to apply setTextFormat function for my dynamic text filed in as 3, but its not taking. look at my code and suggest me where i am going wrong.
[Code]...
I have a movieclip, with a dynamic text inside.This movieclip is already on stage.I have found several solutions to this TextFieldAutoResize, however, most of them requires to create a new text before implementing TextFieldAutoResize.LEFT or right or center or .... etcIs there any method to apply auto resize on dynamic text which are already placed on stage?
View 8 RepliesHow would I go about applying the following text format only to the word 'the' (regardless of caSe) in my textfield?
Code:
my_txt.text = 'The cat jumped over the house.'
/// my format I want to apply
with (_light_S_fmt) {
[Code]....
if it were possible to apply a tiled image fill to text to create a texture.
View 3 Replies