Media Server :: 3.5.2 In Development Mode: Are External Connections Accepted?
Nov 23, 2009
Does FMS 3.5.2 in development impose restrictions via the origin of connections? That is, does it only allow localhost connections via ActionScript (NetConnection) or are external connections allowed?In other words, can I have FMS in dev mode on a dedicated server and then have my client code running on a different machine that opens connections to this development server?
View 2 Replies
Similar Posts:
Feb 23, 2012
I have been running FMIS 3.5 for about 18 months, and recently it started acting up even though I have not made any changes. After a while (sometimes days, sometimes hours), it starts rejecting new connections, but it allows existing connections to keep working. If I refresh my app, then I can't reconnect. The license I have is unlimited. Can anyone shed some light into why this is doing this and what I can do to fix it? Sometimes it happens when only a couple dozen people are online, and today it did it about 4 times with over 1500 people online.
View 1 Replies
Jul 8, 2011
I have a setup where I have some edge servers (as in <Mode>remote</Mode>) that pull content from an origin server. I only want to allow RTMPE connections to the edge server. I'm trying to do this by using the <DisallowedProtocols> element on the origin server. I'm setting: <DisallowedProtocols>rtmp,rtmps,rtmpt</DisallowedProtocols>
in the relevant Vhost.xml on the origin server. However, when I do that, proxying through the edge server stops working. I get a "Connection attempt rejected by FMS server [ Server.Reject ] : Connection failed." from OSMFPlayer (which I'm using for testing) and these lines show up on the origin server's core.00.log file:
[Code]...
View 2 Replies
Feb 16, 2010
How is it possible to determine in advance the max number of simultaneous connection for my FMS?
View 2 Replies
Jun 29, 2010
The attached image shows 17 client connections. Unfortunately there are not 17 clients connected to that app. In fact, I add users to a userlist shared object in application.onConnect(), and that shared object only reports 6 connections. That is the accurate number of connected users.
Why the phantom connections? Even if I unload and reload the app, the 17 client connections return.
How can my userlist shared object and the client connection number be out of sync? This situation seems to be related in some way to an FMS memory problem that is cropping up all of a sudden. When I have larger numbers of connected clients - say 300, the client connections reported in the FMS console are ten times that - like 3,000 or more. Then the application is unloaded by FMS for being a memory hog.
The app itself is simple. It just stores each user in a user array and passes chat communication to and from these users. The last time this main.asc code was changed was 2/8/2010. No problems with it in the countless times we've used it since then. Why the sudden phantom FMS connections, memory hog behavior, and constant unloading of the app?
View 2 Replies
Aug 14, 2011
URL...I am running application instance that implements publisher/subscriber on video streams. Application code is very thin and can be removed completetly if required. In a specific time, randomly, disconnect messages stopped happening which causes the folowing:
1. Streaming service shows decrease of bw per second
2. Users count is increasing linearly.
3. No disconnect messages apears on access.0x.log
View 6 Replies
Sep 7, 2011
I have FMS 4 and a videochat app (one-to-one), everything runs smoothly until about 750 users (it means about 1500 connections to fms), then I get a sudden drop in users connected to 300-400, no errors in the fms log and the cpu/memory usage is at about 25% just before this. I'm running Windows 2008 R2 Web (x64) and I've red somewhere that maybe this version of windows has some connection limit that could be the cause, but I've no idea of what could be happening.
View 2 Replies
Apr 10, 2012
How to set the maximum number of connections of FMS on the same IP?
View 3 Replies
Sep 10, 2009
If I am streaming at 256kbps how many connections can I get on a 100MBit port? I confess tnat I don't know the math
View 12 Replies
Mar 17, 2011
I have a FMS server running that I am hosting some VOD content on. I am using HTTP dynamic streaming to deliver this content. Everything runs fine from a technical standpoint, but I am unable to see the connection details in the Admin Console. I have loaded vod -> defaultinst under the applications tab in the console. No connection details populate.
View 1 Replies
Jun 4, 2011
I'd like to hear some opinions about using NetGroups VS. using direct p2p connections between everybody, considering there would either be 2,3 or 4 people max in the group.
View 1 Replies
Feb 3, 2011
Is DVRCast appliction working on Flash Media Development Server?I am using Flash Media Development Server 4, Flash Media Live Encoder 3.2, and URL..I've installed DVRCast tool on the server, I am also streaming with the checkbox DVR Auto Record turn on, on my streaming computer.However when I configure the player from OSMF, I can only see a LIVE stream, but the DVR functionality is not working. Once I turn the DVR stream checkbox on ADVANCED on OSMF, it cannot find the stream.
View 4 Replies
Apr 11, 2012
In multiple instances, limiting the maximum number of connections for the same IP?You give me the answer is to limit a single instance, whether there is a way to limit the number of users of the entire connected to the FMS?
View 5 Replies
Oct 7, 2009
We have a custom application that is running on FMS. Server is dedicated just for fms, there is only one application running on the server, with more instances, average traffic is 3-15 simultaneous users.The problem is,server suddenly stops accepting connections (after 1-3 days from restart), from this point it is impossible to connect to any instance, and fms server must be restarted.When the server crashes, the admin console can see all open instances, can close instances, can restart fms. There is nothing logged, that would explain this sudden failure.Second problem is, cores are connected and disconnected too often, causing client to reconnect (takes 2-5 seconds).
Hardware: 4 x quadcore Intel(R) Xeon(R) CPU E7440 @ 2.40GHz, 32 GB ram
OS: CentOS release 5.3 (Final), kernel: 2.6.18-128.4.1.el5
cpu and mem usage: 1-5% max[code]...........
View 1 Replies
Dec 10, 2010
Server conf:
2 x Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
16Gb RAM
2 Gbit ethernet channel
OS - Linux CentOS 5.5 x86_64
FMS4 Interactive
Live stream parameters:
320Ñ…240 qua_=87 bw_=200000 kf_=5 fps_=18
So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling aggregate messages and configure the size of stream chunks) do not help.
View 2 Replies
Jan 9, 2011
I'm trying to find out how I can tell how many users are connected to the same FMS application in a flex application:
public function totalConnectedUsers():void{
lblText1.text = "There are a total of " + bindableUserVariable + " Users Connected to the Stream Now";
}
View 6 Replies
May 20, 2011
I've been trying to figure out FMS for about a week now. Because of company firewalls, all traffic must go through either port 80 or 443 (I configured this in FMS.ini). I also created a self-signed SSL certificate and configured the adaptor.xml file to use it. Nevertheless, here are the problems I am experiencing: For RTMPT & RTMPTE, I can't start more than 9 connections. Beforing configuring FMS to also use port 443, I could only get about 4 connections. Now I would like to say that I testing this between only two computers, the FMS server with apache web server and a client.why it will not at least start 10 connections which I know is the limit for the dev version? Also, when using RTMPS I can only start 1 connection. Why is that?
View 4 Replies
Oct 14, 2010
The instructions for installation only cover installation on "localhost". I'm wondering if I could use the development server for a small scale website depolyment with restricted traffic, from a commercial server, such as goDaddy?And if so, what''s the method? Do I download the package from Adobe to my local hard drive and install over the network, or copy the package to the server and install it online?
View 1 Replies
Jun 7, 2011
It stands to reason that an OS would have a memory limit for the FMS process. I have a video chat app to which I may need to connect 300,000 or more concurrent users. Has anyone done this? Would this break the bank? What's the most you've ever had connected at once?
The video portion of my app goes through a good CDN, so I don't think there's a problem there. But my chat room is all on one FMS instance. I see something in FMS docs in "configuring performance features" that warns, "Adobe recommends that you ensure that your total system memory usage does not exceed the process limit of your OS". Granted it's in the context of configuring media cache, but wouldn't the same apply to chat room size if the numbers get high enough?
View 5 Replies
Oct 26, 2011
I work on a project for a client so i can do otherthings while i wait on this answer. Anyway what ports do i need to open so I can stream video with hls for Apple/IOS devices? i've opened 80,8080,1935 but i think i saw somewhere that i need to open a port range.
View 2 Replies
Mar 1, 2010
I am involved in project managment for a large video conferncing project involving over 100k simultanous connection and most likely to be increased 4 times by next six months.While figuring out the scalability area ,it was concluded that smart selection of hardware and origin-edge clustering will be suited most. Well while studying this documentation says it supports thousands of calls but unfortunately I could not determine the actual numbers. Can you tell me how many edge server will be needed for 100k simultanous calls/number of sessions per edge server and will we need license (4500$) for each edge server?
View 2 Replies
Feb 15, 2011
I have a customer that is actually developing an streaming solution in RTMP. So far, while trying to stream H264 files to FMS, he has some issues.
He uses two video streaming services from his encoder (the one he is developing), both using same source and same h264 encoder. One of the streams use flv muxer and one uses mp4 muxer (f4v). He has a component for the RTMP streaming (using librtmp) in order to streaming to the Flash Media Server. There is two main issues: 1. In case of using mp4 mux, we can not send to the FMS b-frames (removed by the encoder, using profile base), If we send b-frames the FMS disconnects the connection. 2. The FMS losses huge amount of memory while streaming back mp4's.
View 3 Replies
Aug 27, 2010
What is the best book out there reagrding Flash Media Server development using flex 4/ Action script. There are many books or resources out there on Flex and action script but nothing specialized on Flash Media Server.
View 1 Replies
Sep 3, 2009
Allright, so i'm searching for information on how to write plugins for FMLE 3.0, the reason is that i need to extend some functionality regarding the metadata injections. So, does anyone here know of an API/Framework/SDK like paper that is a good place to start reading? Any input will be welcome, except "nay sayers" because i know it's possible to make plugins, ive seen one or two out there, just dont know where to start.
PS. I have plenty experience in writing DLL's for windows applications, but i would rather refrain from reverse-engineering FMLE to use windows hooks and insert dll's at run/loadtime, would rather have a more or less "intentional" framework to work with.
View 1 Replies
Nov 29, 2009
I have fms 3.51 developer server installed in a windows 2003 standard edition environment. i also installed adobe flash media encoder 3 in a win xp pro environment Both computers are located in different states.How can i use the fms 3.51 to be able to setup a website with a link to be able to stream live from. the windows xp computer connected to four video camera's.
View 4 Replies
Jan 27, 2011
That is , I don't need to terminate the current publishing video then republish again.I just want to change the publish mode,maybe from live to recorded mode.
View 3 Replies
Mar 4, 2010
can the "mode" tag in vhost.xml file be edited using getconfig() and setconfig()?
View 10 Replies
Mar 30, 2010
I am running FMS 3.5.2 on Windows Server 2008. The server only has 40GB free. Is it possible to store media on an external drive connected to the FMS? Then have my http or rtmp requests go to the external. Am I making sense? I'm sure there is a script to accomplish this, but I am afraid it will degrade the media files.
View 4 Replies
Sep 19, 2011
I installed the FMS 4.5 on a debian system already running an apache web server. I configured the httpd.conf as mentioned in d6093a7e2f8312a374a1bde-8000.html but when i call a streaming url e.g. http://<IP>/hls-live/livepkgr/_definst_/liveevent/livestream.m3u8 the request is still handled by the old apache, not by the FMS
View 9 Replies
Jan 24, 2011
All I can find is this discussion but there is no answer to my case.Our company is developing an application, which connects to https server when a client is joining/leaving the server. Here is a part of main.asc file:
application.onConnect = function(client, meetingId, mettingAttendeeId){
if(mettingAttendeeId){
trace('User client : "'+this.name+'" connected');
[code].....
View 2 Replies