I can stream files in the root of a NAS drive (/nas_dir), but not in any of the sub folders (/nas_dir/sub/). FMS has read/write permission to all the files on the NAS but all i get is "stream not found" when I access anything in the sub folders (streams play fine from the root of the NAS) FMS is running on rh5.4
View 1 RepliesI am running Flash Media Streaming Server 3.5.1 r516 on a CentOS system. I also have WHM/cPanel installed on this system. My scenario is this. We have a large number of MP4 media files that are currently located in a web root directory created by cPanel: /home/mediafa/public_html/fullservices. These all work without a problem when doing progressive downloads. However, we also want to make them streamable with FMS as well. From the documentation, I should be able to create an entry in the /<fms install dir>/applications/vod/Application.xml file to look up files in that folder.
Here is my VirtualDirectory block:
<StreamManager><VirtualDirectory>
<!-- Specifies application specific virtual directory mapping for recorded streams.-->
<Streams>/;/home/mediafa/public_html/fullservices</Streams>
<Streams>/;${VOD_COMMON_DIR}</Streams>
<Streams>/;${VOD_DIR}</Streams>
</VirtualDirectory></StreamManager>
However, when I try to connect to a file that is in that directory, I get a 404 error in the access.00.log file. I've tried to change the owner/group on the fullservices folder as well as the owner/group of the target file to the fms user/group, but I still cannot connect to it. The connection address is rtmp://<ipAddress>/vod/mp4:1005-03m_256k.mp4.
We will only use the servers for Live streaming and VoDs, so far no plan for any complex applications to be deployed on the servers yet. As
far as I understand, the bottleneck of streaming servers are with network connection rather than CPU or resources (servers are only support up to 4GB of RAM anyway).
I want to create folders inside of VOD that I can use to store FLV in and them stream them to webpage.When I do this the webpage displays a white screen.It doesn't seem to find the FLV.
View 12 RepliesI have a FMS set up and when I do a normal video stream I use an address like [URL] So I want to make it so that I can stream from sub folders in the VOD file like [URL] This doesnt seem to work.
View 13 Repliesi am new to FMS4 and i am having a problem playing some files with different folders.
i have different folders in C:media3feeds
in that directory i have folder "1", "2" and "3"
other words C:media3feeds1
C:media3feeds2
C:media3feeds3
[Code]...
We use FMS 3.5 for streaming IPTV. We have a number of channels and currently our mp4 files are all held in the Media subdirectory, below vod
We want to divide them into separate channels for the the stations with their own subdirectories for organised filing but cannot see any way of doing this and then referencing the correct directory with the rtmp: via XML.
I have an application running in FMIS 3.5. Everything is working. Now I want to create two application instances, one for a live stream and one for a development stream. That way I can test my application against the development stream without interfering with the application that manages the live stream.So first I created folders under my application. Say the application's name is test. I created two folders, dev and live. Then I changed my Flex 3 applications so that they would write to rtmp://mydomain.com/test/live/stream. But the application still records the live stream in test, not test/live.[code]
I restarted my vhost. My application still records my live stream into the test folder instead of test/live.So I removed those entries and restarted my vhost.Then I added a folder called streams below my test folder. And I added dev and live subfolders below streams. I saw this on another post somewhere. But this didn't work either.I have not been able to find the configuration element(s) that enable multiple instances in one application.Am I missing a configuration parameter somewhere or is this a bug in 3.5?
I've done the following:
created a folder /fmsRoot/conf/_defaultRoot_/stream.example.comcopied in Application.xml and Vhost.xml from _defaultVhost_specified a new apps directory here: /home/stream.example.com/fms_app/ then added
[code].....
We have added a few sub folders under the webroot folder. I did this so I could make a custom web page that generates the code need to display the video in a web page if it is one of the folders. My question is how do I get these folders and their content to show up in the Administrative Console? Also how do I get the videos to be logged? I have looked through the Server.xml and Application.xml files and the fms.ini but do not see any place, Am I not looking for the correct setting? Attached is a pic of the folders.
View 2 RepliesI have more sites, sites have some users, and each user has separate application folder
What I want is put application folder in a defined folder like following
C:FMISsiteAapplicationsuser1
C:FMISsiteAapplicationsuser2
C:FMISsiteBapplicationsuser1
C:FMISsiteBapplicationsuser2
etc...
I think for this I need to create virtual hosts.
Recently, I writed a programe about creating a text file and writing data into it in the server application folder. My code is as following:
[Code]...
Supplement: The text file named test.txt doesn't exist before create the fileObj, an instance of File Class.
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 Replieswhile im installing FMS,it goes wrong,i pasted the sceen below.My Os:FC14_X86.
Proceed with the installation? (y/n/q): y
/opt/adobe/fms ~/FMS_4_0_0_r1121
Server:fms command:stop
sed: -e expression #1, char 6: unknown option to `s'
[code]....
My company has recently asked me to install the Adobe Streaming Server 4.0.I was wondering if it is possible to have the server software reside on the C: drive, while having my VOD files on seperate D: drive.The staff here wants to separate the software (server in this instance) from the individual flash video files, so they have set up two drives.
View 2 RepliesI am testing fms this days, I have put all my files(such as 1.mp3,2.mp3...n.mp3) in my directory.I can play single file fine with url like this: rtmp://localhost/mp3/mp3:x/2
but i want to know is there any way to play all files in my direcotry? for example, user click the play button, the player(smp) automatic plays all files in the directory, link windows media server.Should I use playlist? Or there is another better way?
I want to change the logs files directory from: C:Program Files (x86)AdobeFlash Media Server 3.5/logs to: D:fmsLogs in adobe in: Home / Flash Media Server 3.5 Configuration and Administration Guide / XML configuration files reference it says:
[Code]...
getting started with the FMS Interactive 4.5 In the documentation it says to turn off proxying to apache on port 8134 and use port 80 in order for http dynamic and http live streaming to work properly. Since I changed Apache conf to use port 80 I assume my video root will be under webroot/vod, webroot/dvrcast_origin, etc, right?I don't see the dvrcast_origin or livepkgr folders under the webroot though. Do I just need to copy them under webroot for it work properly?
View 1 RepliesI'm pretty new to Flash VOD, exploring using a FMIS as a substitute for an existing vbrick systems' server. One thing that I'll need to do is authenticate users against an LDAP directory. Basically, the implementation will need to embed a Flash media player in a web page, the page also sets the server URI and stream name for the player. The player would need to ask the user for a username/password, and the server would need to make some determination about whether the user is authorized to receive the specified stream.
The advertising on Adobe's site for FMIS talks about LDAP, but on closer inspection it seems as though there's no real LDAP implementation. Instead, it seems as though there's a framework that allows for the development of an LDAP service. Is this the correct understanding? and if so, are there are any third-party plugins available commercially to handle LDAP? And if there aren't any commercial products, are there are any good resources for getting started developing one?
[Code]...
I have a website setup in IIS 7.5 with a virtual directory pointing to a local folder outside of the www root of my website e.g:
the website is c:website
the virtual directory is in c:images
I use flowplayer to play my movies, when I put the movie path in my website root directory structure, say c:websitemoviesa.flv it works fine in the player, but if I put them inside the virtual directory and point the player to play it from there using a relative URL, it doesn't work
I suspect that this has to do with either permissions or flash configurations to allow it to access directories outside of the scope of the website, but I have no idea where to edit such settings
I have successfully been able to write some client-side ActionScript that allows me to record my webcam and mic data to my FMS server. The .flv files get saved to a directory under the applications directory. However, I need to process those flv files for a web application and would like those .flv files to be saved to the web app's directory (outside of the FMS application directory). I have tried changing the <Streams> tag in the Application.xml file that I placed in the FMS application directory, but that simply did not work.My goal is simple: to save the recorded stream data outside of the FMS application's directory. I have been going crazy trying to do this, but would like to know any pointers that any of you experts have. Can this be done? If not, how can I execute a server side PHP script after the stream is done recording. I know about using the exec() function in PHP, but am unsure as to how to execute that script via client-side actionscript.Here is the path to my FMS server (Linux OS) installation and the application directory. The application name is "ngale"./opt/adobe/fms/applications/ngaleHere is the path that my client-side ActionScript is placing the .flv files of the recorded streams/opt/adobe/fms/applications/ngale/streams/recordings/Here is the path to my web application/home/user/public_html/dev.ngale.net/public/Here is the path that I would like for the .flv recording files to be saved to/home/user/public_html/dev.ngale.net/public/audio/.flv
View 5 RepliesI need the main.asc file to return the current directory listing to a flash application.
[Code]...
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesIf I set EncryptionScope to "server" in httpd.conf (<fms>/Apache2.2/conf/httpd.conf) how or where do I specify the certificates for flash access if I want to use "ProtectionScheme FlashAccessV2".
<Location /custom-hds-vod>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "../webroot/custom/vod"
[code].....
Some users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 RepliesIs there any way to access a Flash Media Server server-side script through a C++ plugin? I know you can call server-side functions, but I want to use the plugin to do image processing, so I need to get bitmap data from the client to the plugin. I've been poring over the documentation and the forums and there doesn't seem to be any way for the plugin to communcate with the server other than to read Event properties. If this is the only way for the plugin to recieve data from the server, is there any way to override an event property to send custom data?
View 5 Repliesdoes anyone know how to use f4vpp on linux? I am not able to use it on Debian Lenny. What i have done so far after downloading and extracting the F4V Post Processor:
[Code]...
I cannot understand why this happens. Maybe Debian Lenny is not supported? Which linux distributions are supported?
i'm trying to use this code but i can't to access to function nc.onFCSubscribe. how can i do it? someone know about that?¿ the original site of the code is http://www.flashcomguru.com/index.cfm/2009/8/14/flvplayback-obtain-nc- reference
// listen to player events and kill manual connection once we're streaming player.addEventListener("playing", playListener); player.addEventListener("stateChange", stateListener); player.addEventListener("ready", readyListener); /* this is the hack: check once every frame if the NC has been defined inside the FLVPlayback component */ this.onEnterFrame = function()
[Code]...
1.How do I connect to the Admin Console through a static ip remotely as I will not have access to the machine locally?
2.I want to stream live audio and do audio on demand, how do I do this?3.How to I embed a music player in a webpage that can stream live audio or the audio on demand?
[URL] that one day it can be played directly by html5's video tag:<video src="rtp://myserver.com/path/to/stream"> Your browser does not support the VIDEO tag and/or RTP streams.</video>Does FMS support this kind of url?
View 1 Replies