I'm looking for a way to configure wamp with FMS 4.5. I installed fms 4.5 without the apache server that comes with it. From the way it looks, fms seems to be running; i was able to run the sample files that came with it. I really need to know to configure these two.
View 1 RepliesHow can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 RepliesWhat would be the crucial things to optimize when you have hundreds of people connected to your application, with most of them being in a video conference with RTMFP direct_connections, and also some using RTMP connections?
Our app seems to go down under heavy load. - RTMFP stops working (no one can connect to the service with RTMFP NetConnection) and RTMP NetStreams don't work either, however Text Chat works.
Server we use have a connection limit of 500 connections, and 2.5mbps speed limit per connection (a video conference with 4 people uses less than that so it seems fine).
how can I install and configure Red 5 media server in my web server?
View 5 RepliesI have been running a test server using Apache as the web server. The problem is I need to be able to run FMS on an IIS machine, and there is a conflict over each trying to binding to port 80. I have read that a solution to this problem is to have 2 IP addresses, having FMS bind to one and IIS bind to the other. This is not a requirement for Apache and FMS. Why is it a requirement for IIS and FMS? This question my show my lack of knowledge of the difference between the 2. But, is it possible to configure IIS or FMS so that they share port 80 like FMS and Apache do? how Apache and FMS work together, and why IIS cant?
View 2 RepliesI want to know how to configure FMS such that it works well with clients connecting via wireless connection.. Through an access point or sth.
View 7 RepliesFlash Media Interactive Server 3.5We currently have an Edge/Origin configuration. We have another Origin Server to be used for fail-over. How do you setup a back-up Origin Server?
View 4 RepliesAnybody know how to configure SSL just for admin console acccess ?
View 1 RepliesMy problem and I SWFVerification enabled on the server and saw that FMLE does not connect more, I looked for some explanation and I saw that if that is enabled for SWFVerification you must also change UserAgentExceptions tag <Exception from = "" to =""/> at this point I added this change<Exception From="FME/0.0" to="FME/4.0"/>but I saw FMLE does not connect as little to solve this problem
View 3 RepliesI need to display large number of streams in one flash player. In order to minimize cpu load i want to display only intra frames in h264 video. I have tired receiveVideoFPS method of netstream with value 1 and 2 but it is not giving the correct result.
In wowza server i tired recieveVideFPS with value -3 and it is giving the correct result as i want but after some time flash player crashes in all the browsers and in air too.
I have installed Flash media server 3.5, and i have put my vod files under 'C:Program FilesAdobeFlash Media Server 3.5applicationsvodmedia'
the sample file under this folder given by fms 'sample.flv' is playing fine, (this has VP6 as video codec, mp3 as audio)
"rtmp://my_SYSTEM_IP/vod/sampl"
where i have kept my own file called 09.flv which has H263/mp3, and one more 09_1.flv, which has H264/mp3. But both of the files are not streming. When i tried to play these over vlc it sayes file not found. But sample video plays. Is there any way to make work vod files to stream?
How to configure Public and private IP address in Flash Media Server?
View 6 RepliesI carefully read forums for phpmyadmin before posting here and none really had the answer. I am able to install phpmyadmin on stand alone versions of Apache, but unable to do so on the FMS version. I previously read this post [URL] and it doesn't seem to answer the question although it looks like part of the question may have been answered offline. The problem is that phpmyadmin installs and I know that PHP is running fine because I can run a couple of test scripts with no problem. However, when I go to login to phpmyadmin, I get the dialog box asking me "do you want to open or save this file" and the script itself never executes. I checked the the server log, and here's what's going on:
[Code]...
Based on the post noted above, I'm assuming this may have something to do with either POST variables or maybe proxying unknown requests, however the forum post didn't appear to resolve the problem. I also posted to that thread, but I wasn't sure it was still being monitored.
We have a pool of FMS 3.5 servers behind a haproxy load balancer. They are working fine with RTMP and download with HTTP through FMS proxy. We need now to have RTMPT working for some clients behind a strict firewall.
1) We started configuring the haproxy load balancer to work in HTTP (level 7) mode and we changed the FMS Adaptor.xml configuration file on all servers with the tag below:
[Code]...
I'm wondering if anybody knows of a guide or a step by step process for configuring a VBrick HS.264 encoder to send video to my FMS for live broadcast. I'm experiencing issues configuring the Transmitters on the VBrick admin panel and unsure how to have FMS recognize the video stream to publish it. Has anybody used a VBrick encoder with FMS?
View 1 Replieshow to test and confirm that fms clustering is working.
View 1 Repliesi want to make an xmlsocket chatroom in my computer with wamp server ,i use this port and ip:
HTML Code:
mySocket.connect("localhost", 1026);
and i have changed the port of wamp server to 1026 and i have puted the socket.php file in www directory of wamp.when i run the swf file in flash the connection establishing is succesfull but when i try to send data the connection will close.this is the actionscript code:
HTML Code:
mySocket = new XMLSocket();
mySocket.onConnect = function(success) {
if (success) {
[code]....
How can I send a custom response upon a custom request on a xampp/wamp based Apache server upon a connection to a specific port?I'm trying to reply to the � a flash app is requesting in order to allow a crossdomain http GET request.The flash policy request, is made to port 843 by default and i'd like to keep it that way.The port should get a � (ending with a null char,� is just for the reference) and replying with something like:
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
[code]....
As far as i know, the request should be return as a plain text, although Content-type, might be needed as well.I've tried using the following:[URL] and although it listens to the port and accepts connections, it doesn't reply with the specified xml upon request.I wrote a simple C# web server which listens to port 843, and serves the aforementioned policy - it worked out just fine, however, when using a SecureSocket connection for a secure connection (i.e opening a socket to a HTTPS/SSL protocol) - the request that is sent is encrypted using the hosts certificate. As far as i know, there's no way of listening or acquiring the servers certificate and decrypting the data via an external app hence, the only way is to somehow 'teach' Apache to respond with the crossdomain policy after a proper request is sent via an appropriate port.
Another idea i have is to read the server's certificate file stored in the Apache directory regardless of what happens on the server itself, though imo it's an overkill.
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
I would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 Replies