Media Server :: Unable To Properly Configure Phpmyadmin On FMS
Sep 7, 2010
I carefully read forums for phpmyadmin before posting here and none really had the answer. I am able to install phpmyadmin on stand alone versions of Apache, but unable to do so on the FMS version. I previously read this post [URL] and it doesn't seem to answer the question although it looks like part of the question may have been answered offline. The problem is that phpmyadmin installs and I know that PHP is running fine because I can run a couple of test scripts with no problem. However, when I go to login to phpmyadmin, I get the dialog box asking me "do you want to open or save this file" and the script itself never executes. I checked the the server log, and here's what's going on:
[Code]...
Based on the post noted above, I'm assuming this may have something to do with either POST variables or maybe proxying unknown requests, however the forum post didn't appear to resolve the problem. I also posted to that thread, but I wasn't sure it was still being monitored.
View 3 Replies
Similar Posts:
Jan 17, 2010
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 Replies
Mar 20, 2010
I instal on a machine the Adobe Flash Server 3.5.I have the Flash media administration console but i do not know how i can configure the machine to be a flash media streaming server.I have a tv card on my machine and i want use de flash media encoder to stream to a web page the tv signal on my tv card.I think i need to send the signal encoded use the flash media encoder to a flash media streaming server correct?
View 1 Replies
Sep 15, 2011
What would be the crucial things to optimize when you have hundreds of people connected to your application, with most of them being in a video conference with RTMFP direct_connections, and also some using RTMP connections?
Our app seems to go down under heavy load. - RTMFP stops working (no one can connect to the service with RTMFP NetConnection) and RTMP NetStreams don't work either, however Text Chat works.
Server we use have a connection limit of 500 connections, and 2.5mbps speed limit per connection (a video conference with 4 people uses less than that so it seems fine).
View 3 Replies
Jan 31, 2007
how can I install and configure Red 5 media server in my web server?
View 5 Replies
Jan 26, 2010
I have been running a test server using Apache as the web server. The problem is I need to be able to run FMS on an IIS machine, and there is a conflict over each trying to binding to port 80. I have read that a solution to this problem is to have 2 IP addresses, having FMS bind to one and IIS bind to the other. This is not a requirement for Apache and FMS. Why is it a requirement for IIS and FMS? This question my show my lack of knowledge of the difference between the 2. But, is it possible to configure IIS or FMS so that they share port 80 like FMS and Apache do? how Apache and FMS work together, and why IIS cant?
View 2 Replies
Mar 10, 2012
I'm looking for a way to configure wamp with FMS 4.5. I installed fms 4.5 without the apache server that comes with it. From the way it looks, fms seems to be running; i was able to run the sample files that came with it. I really need to know to configure these two.
View 1 Replies
Jan 27, 2010
I want to know how to configure FMS such that it works well with clients connecting via wireless connection.. Through an access point or sth.
View 7 Replies
Apr 14, 2010
Flash Media Interactive Server 3.5We currently have an Edge/Origin configuration. We have another Origin Server to be used for fail-over. How do you setup a back-up Origin Server?
View 4 Replies
Apr 11, 2011
Anybody know how to configure SSL just for admin console acccess ?
View 1 Replies
Nov 18, 2009
My problem and I SWFVerification enabled on the server and saw that FMLE does not connect more, I looked for some explanation and I saw that if that is enabled for SWFVerification you must also change UserAgentExceptions tag <Exception from = "" to =""/> at this point I added this change<Exception From="FME/0.0" to="FME/4.0"/>but I saw FMLE does not connect as little to solve this problem
View 3 Replies
Mar 21, 2010
I need to display large number of streams in one flash player. In order to minimize cpu load i want to display only intra frames in h264 video. I have tired receiveVideoFPS method of netstream with value 1 and 2 but it is not giving the correct result.
In wowza server i tired recieveVideFPS with value -3 and it is giving the correct result as i want but after some time flash player crashes in all the browsers and in air too.
View 4 Replies
May 26, 2010
I have installed Flash media server 3.5, and i have put my vod files under 'C:Program FilesAdobeFlash Media Server 3.5applicationsvodmedia'
the sample file under this folder given by fms 'sample.flv' is playing fine, (this has VP6 as video codec, mp3 as audio)
"rtmp://my_SYSTEM_IP/vod/sampl"
where i have kept my own file called 09.flv which has H263/mp3, and one more 09_1.flv, which has H264/mp3. But both of the files are not streming. When i tried to play these over vlc it sayes file not found. But sample video plays. Is there any way to make work vod files to stream?
View 15 Replies
Jul 26, 2010
How to configure Public and private IP address in Flash Media Server?
View 6 Replies
Dec 1, 2010
We have a pool of FMS 3.5 servers behind a haproxy load balancer. They are working fine with RTMP and download with HTTP through FMS proxy. We need now to have RTMPT working for some clients behind a strict firewall.
1) We started configuring the haproxy load balancer to work in HTTP (level 7) mode and we changed the FMS Adaptor.xml configuration file on all servers with the tag below:
[Code]...
View 1 Replies
Dec 23, 2010
I'm wondering if anybody knows of a guide or a step by step process for configuring a VBrick HS.264 encoder to send video to my FMS for live broadcast. I'm experiencing issues configuring the Transmitters on the VBrick admin panel and unsure how to have FMS recognize the video stream to publish it. Has anybody used a VBrick encoder with FMS?
View 1 Replies
Oct 28, 2009
how to test and confirm that fms clustering is working.
View 1 Replies
Sep 30, 2010
What would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
View 3 Replies
Jun 11, 2010
Some users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 Replies
Jan 5, 2011
We have one video application in this application an user can record a video of 30 seconds. Timer is not getting fire after 30 seconds only on one computer on other computers it's getting called except that computer. Frankly speaking we don't know about the computer configuration on which timer is not fired after 30 seconds. Can any body suggest us what's the problem? Where we are lagging?
We are considering this is due to older version of flash. Correct us if we are wrong. May be due to browser dont know what's the problem.
View 5 Replies
Jun 23, 2011
We have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 Replies
Dec 6, 2011
I have some problems about installing FMS 4 on a CentOS 6 x64. After installing, FMS doens't start properly. I don't see the videos on the web interface. In the log file master.00.log, i can see these errors messages
2011-12-0608:38:461675(i)2581226Edge (1748) is no longer active.- 2011-12-0608:38:461675(w)2581255Edge (1748) _defaultRoot__edge1 experienced 1 failure[s]!- 2011-12-0608:38:461675(i)2581224Edge (1798) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
[Code]...
View 8 Replies
Jun 13, 2011
I am developing a flash media encoder. Encoder is sending 'publish' command in 'record' mode to FMS. But FMS is not giving any response (I am catching responses in wireshark) but creating the related folders in its application directory. So, I assumed that FMS has received the publish command and reay to receive the data. Then I sent some 20 media messages each of soze 500 bytes. FMS is sending 'onStatus' response for the publish after receiving the 8th media message and writing only contents of media messages from 9th to 20th.
View 1 Replies
Jun 17, 2010
i have fms installed on a server, say server1. my flash files (swf) which allows user to record audio is on server 2. in the swf file, the connection is set as follows: nc.connect("rtmp://server1/test");
im able to view flash videos on server2 which streams from server1. however, i cannot upload any recording to the above directory. does the recording goes to the application or webroot folder? do i need to set any authentication to connect to server1(fms) from server2(swf)??
View 1 Replies
Nov 19, 2010
I've read the reference here,but it seems to me that I can only make it work with live OR recorded videos.How can I make it work with both live AND recorded videos?
View 7 Replies
Jul 28, 2010
have an error in the publication of a Live (Webcam) to a CDN (Level3).when "ns.publish (STREAM_NAME 'live')" 'it is returned an error"NetStream.Record.NoAccess 'Thank you to those who use AS3 application to connect to their CDN (Akamai, Level3 ...) oftell me if they encounter a problem.I use the same code has always been to publish a Live (Webcam) to serversstreaming (FMS RED5, etc ...) and can be summarized as follows:nc = new NetConnection ()nc.connect (HOST_URL)../..ns = new NetStream (nc)ns.publish (MON_STREAM 'live') this works on all versions FMS 2.5, 3.0, 3.5, etc. ..Since a migration of my FMS version 2.5 to 3.5 this code does not work anymore!the worst is that Flash Media Encoder (FME 3.0) it is operating properly.So is there a feature to broadcast a live publishing point on a CDN (LEVEL3)?The CDN turning on the fact that if it works with FME is that it is the code that raisesproblem ... without more information.The FMS version uses "special" of FMS, but until now I had no worries!In general the user CDN use hardware encoders ...
View 4 Replies
Jan 27, 2011
I have been trying to get my live feed up and running for friends but they are unale to view it. I have FMS 4 with FMLE 3.2 on Win7. Under the fms url i have 'rtmp://localhost/live' and Stream name is 'livestream' I can view the stream just fine from my computer on which i am running both FMS and FMLE. but when i put the html file on my website, my friends just see the empty swfplayer. You can view it at[URL]. I was trying to figure out what the problem was so i copied the swf code 6 times with different settings but nothing worked. on my computer, only the first swf player works and im guessing that is because its localhost.
View 2 Replies
Sep 19, 2008
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
View 3 Replies
Sep 2, 2010
I am trying to develop a server-side application(splitterApp) using FMS 3.5.2 which would accept an incoming stream from 3rd Party encoders and publish the stream using FCPublish method to an application(edgeApp) on our edge servers. The splitterApp contains 3 classes for performing the activity. So whenever a incoming stream is received by the splitterApp, the main.asc would create an object of type IncomingStream() and push into unPublished array. A timer based job then picks the unpublished stream from the array and invokes StreamController.PublishStream(). The StreamController.PublishStream() method then creates a new PublishedStream() initialised with incoming stream. The method thereafter calls PublishedStream.PublishStream() to initiate net connection to the edge server application(edgeApp). After successful net connection, I call "this.publish_connection.call ("FCPublish", null,this.thisStream.stream.name)".
The edgeApp accepts the publish and therefore performs:
[Code].....
View 2 Replies
Oct 11, 2011
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.
I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
View 1 Replies
