Media Server :: Flash 4.5 Unable To Start Setup On OS X 10.7?
Oct 11, 2011
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.
I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
We installed FMS on a new server - a cloud environment - and set the fms.ini for the correct dedicated IP but we're unable to see the start screen or access any videos.where the IP would need to be added to point to the wwwroot directory?
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
I have started the vhost setup. I have cpanel on the server and I added the domain and it resolves to the hosting account just fine pull up www.domain.com and goes to server.
I added the www.domain.com vhost. I pointed the application dir to /home/domain/public_html/applications/
I copied live over to applications dir. I setup user and pass for the virtual host login.
i have a orgin server and 2 edge servers and a load balancer
first off im confused in each edge server i set them to be remote, rtmp and changed the routeentry to <RouteEntry>*:*;96.44.***.***:1935</RouteEntry> on both servers
orgin server is just local
what my question is im streaming to orgin and its getting sent to 1 edge and other edge is doing nothing no traffic the stream i set it this way url:
'rtmp://173.254.***.***/live/live_test',
which is the 1 edge thats working if i setup another channel pointing to the other edge server ip adresss it doesnt work.. what am i doing wrong isnt all this supposed to be load balanced or am i missing steps...or did i do it wrong on the flash player config.
No I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
i'm wanting to stream video or even just load it into my flash sites and not lag them....anyway i have had a few people tell me to look at flash media server and flash comm server. i have but i am really confused with it all...WHERE DO I START?? WHAT TO KNOW?? HOW TO DO IT??? etc
We are trying to setup FMS so that a section of videos for streaming are restricted to a specific network, while other videos would be available to all to stream. According to what I read, this is best restricted by means of a vhost. However, I've spent 3 days trying to get a vhost to work and am thoroughly stumped.Our current configuration for the _defaultVHost_ is: within vhost.xml, it points the apps dir to ${VHOST.APPSDIR} which points to the default install location. The VOD_DIR within fms.ini points to a separate location: d:contentflash.
I have a problem with setting up my FMS and to NICs
NIC #1: public IP NIC #2: private IP
On #1 I will setup port 1935 and 80 - Clients can connect to my livestreams
On #2 I will setup port 1935 and RDV for the FlashLiveEncoder and the RemoteDesktop
My problem is, when I activate the NIC #2 the FMS is noct reachable from the public NIC.I think it is a FW problem or a problem withe application.xml. how to setup my server (NIC, application.xml and FW) to run how I like?
I was successfully able to setup FMS edge-origin cluster but Origin-only clustering is the one we wanted for our live applications. The only place I found was 'Large Scale Deployment with FMIS'. I guess for Origin Only Clustering, we need to have our own caching system. What does get cached in a Live AV Chat? How do I propagate it to other Origins? What kind of plugins would I need for cache managing? What should the plugin do?
In the attached Origin Only Architecture, what does the Primary Origin do and Secondary Origin do? I thought Origin is the place where the application is actually running and Edges do proxy. Is it the same here in Origin-only clustering also? Are there any tools which can measure the lag in AV? (like performance measuring tools or load testing tools for FMS). What kind of software Load Balancer can we use for FMS clustering? (Like Nginx, Zeus or something?)
I have a task before me that I have not spent any time researching in the past because I never thought I would have to do it... I need some specific advice from some of you gurus out there.I need to set up a training facility in which we film a teacher in HD and broadcast it live across the internet to 30 locations around town. I also need to have a live chat going with the video in which any of the viewers can ask a question to the teacher and he/she can answer it in the lecture being given.
The 30 locations that the viewers will be at will be a board room setting with an HDTV on the wall , and maybe a wireless keyboard and mouse that they can share to chat with the teacher.I know I can quickly figure out all of the video stuff, like lighting and cameras. I really need advice on all of the technical stuff that it takes for the live broadcast on the internet.
I imagine that I will choose a content delivery network, but which one? I imagine that I will use Flash Media Server, but which version? Do I need a real time transoding device to feed the analog HD video signals to to feed it to the computer? The company has T1, is it fast enough on the uploading to get what we need done?
I have been testing a project with no license key(Dev) and last week I purchased a Flash Streaming license but I go into the fms.ini and insert the key and restart FMS but my streams no longer work and the only error I seem to be getting is: Found Connection Penalty (RTMFP) on core launch, penalty active since time 1294334608.351221 I remove the key and restart the service and everything works fine.
I even tried reinstalling FMS and provide it the key when it asked in the installer but same issue. Is this error related to an issue with the licensing key? There is no error when I remove the key but can't get support through contacting Adobe by phone. I asked what is the proper way to install the key and they said they would open a ticket and contact me back but its been 2 days not including the weekend, I thought it would be a very simple question for the FMS dept that I was speaking with.
I have installed FMS 4.5 successfully. I am able to run all the videos in the index.html page (filmthos.com/flash), including the HLS video on my Iphone. I was able to setup a video player for rtmp and it works fine, but I am having trouble with setting up video players for HLS and HDS. I am looking for somthing simple.
The source file or located in these location: /hds-vod/mvp5/media/MP.mp4.f4m and /hls-vod/mvp5/media/MP.mp4.m3u8 respectively (the httpd.conf location for both is HttpStreamingContentPath "/opt/adobe/fms/applications"). So obviously I want a simple video player for the HDS that plays flash and another to play HLS and HTML5. The index.html seems to cumbersome to fine out how these players work.
Is it possible to use origin/edge setup when streaming using HDS ? I have succesfully tested using RTMP but when I try the HDS string - get error "we are having problems with playback". I can view the stream directly if I connect to the origin server. I have 1x origin server and 1x edge server.
I have a load balancing problem for example I have two FMS servers I want to make aconnection between them if the first server overload the second can handle the request
I am trying to set up my video site to stream from the fms server¯ and the instruction stated that I should create my own new folder in the application directory on the fms server, and I have created my directory, which I called brigma_streams¯, and I have copied files from {FMS-Install-Dir}/ sample/Application/vod to my new folder.
We are planning an implementation that would be setup as automatic failover in the event of a disaster. We only have two physical servers (Windows 2008 R2 based). What is everyone's suggestion? I read a lot about origin-only cluster and origin-edge clusters. It seems like origin-only cluster would work best for this type of fail over but I'm not sure. We would most likely use Microsoft network load balancer built-in on Windows 2008 R2. We have the option of using remote storage but could also do local storage. The types of streaming would be videos loaded to the server (not live). Let me know any suggestions to achive an automatic failover with two physical systems
I'm stuck trying to get a Stream.play() call on a recorded video file (.flv) to translate from origin to edge servers. Don't even know if it's possible. If I call Stream.play() on a server, and connect a viewer directly to that server, the viewer sees the stream play. If I call Stream.play() on an origin server and connect a viewer to edge servers the stream does not play.
Is it possible to configure in any way that the play() call would propagate to edge servers? According to FMS 3.5 docs on the Stream class, the following is the case: "When you call Stream.play()on the server, the server becomes the publisher." See [URL].
If that server becomes a publisher and lets say it was an origin server on a CDN, shouldn't the other machines in the configuration receive the published stream? Somehow when you publish a live stream to an origin server it makes its way to edge servers. Is this analogy not relevant to the scenario wherein you call Stream.play() on a recorded file?
I have a question regarding FMS 3.5 and live streaming with failover protection. Currently, we are running a single server with FMS 3.5 for our VOD and live streaming events and its been working great. Recently during our last live video stream the server decided to die and naturally the live stream was lost. To prevent such a future scenario from happening, and given that I am on limited budget what would be a best method of prevention. I saw there is limited documentation on setting up origin to edge, or two origin servers (more likely for us since we can maybe purchase one more server at this time) but I do not have access to make network/router changes etc. I do have full access to configure my Windows 2003 servers however.
While streaming a live worship service in Flash format, I'll need to archive only the sermon in Flash. I do not want to handle this in post/editing. What will I need to make this happen?
I have a case where I'm displaying 3 videos simultaneously using FMIS 3.5. When one is selected it will play the other two will switch and show a videoloop.
What is the proper way to accomlishing this. I actually have 6 videos (3 loops and 3 videos). Do I need a netconnection/netstream/video object for all of them or can they share something. What is the best practice?
Some users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
I am facing a strange issue with a pair of FMIS servers set up with Multipoint Publishing. Configuration is as follows: Encoder >>>> FMIS1 >>>> FMIS2
When freshly started, I am able to view live streams from both servers, however, periodically, FMIS2 unpublishes the streams as seen in the log below. When this happens lives streams are accessible from FMIS1 but not FMIS2. In order to resume live streams on FMIS2, FMIS1 must be restarted.
Logs: 2010-09-01 14:31:00 9244 (s)2641173 NGA_1 is unpublishing - 2010-09-01 14:31:00 9244 (s)2641173 FTV_1 is unpublishing - 2010-09-01 14:31:00 9244 (s)2641173 BBCWN_1 is unpublishing - 2010-09-01 14:31:00 9244 (s)2641173 CTI_1 is unpublishing - 2010-09-01 14:31:00 9244 (s)2641173 CNN_1 is unpublishing - .....
I recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
So I have a FMS 3.5, which I want to do live streams. The thing is I want several different people to be able to do the live broadcast, and I would like the server locked down at least a little and not allow anyone that wants to, to start a broadcast. With that said, I have FMS 3.5 installed, and I installed the Authentificaiton Add-In (3.0). I added a user to the authentification add-in, but it's still doesn't require a username / password, doesn't even prompt me.
I am using remote Win Server 2003 R2 via rdesktop. As an "administrator", I installed FMS 3.5 - Developer version using default options. Media Server starts, runs, and appears to work. Admin Server is not running. When I attempt to start it (from Win admin services tools), I get error 1067 (Error registering class: name mismatch (%1$S, %2$S)). Everything done remotely as an administrator.
