I have started the vhost setup. I have cpanel on the server and I added the domain and it resolves to
the hosting account just fine pull up www.domain.com and goes to server.
I added the www.domain.com vhost. I pointed the application dir to /home/domain/public_html/applications/
I copied live over to applications dir. I setup user and pass for the virtual host login.
We are trying to setup FMS so that a section of videos for streaming are restricted to a specific network, while other videos would be available to all to stream. According to what I read, this is best restricted by means of a vhost. However, I've spent 3 days trying to get a vhost to work and am thoroughly stumped.Our current configuration for the _defaultVHost_ is: within vhost.xml, it points the apps dir to ${VHOST.APPSDIR} which points to the default install location. The VOD_DIR within fms.ini points to a separate location: d:contentflash.
View 1 RepliesI have a problem with setting up my FMS and to NICs
NIC #1: public IP
NIC #2: private IP
On #1 I will setup port 1935 and 80 - Clients can connect to my livestreams
On #2 I will setup port 1935 and RDV for the FlashLiveEncoder and the RemoteDesktop
My problem is, when I activate the NIC #2 the FMS is noct reachable from the public NIC.I think it is a FW problem or a problem withe application.xml. how to setup my server (NIC, application.xml and FW) to run how I like?
I was successfully able to setup FMS edge-origin cluster but Origin-only clustering is the one we wanted for our live applications. The only place I found was 'Large Scale Deployment with FMIS'. I guess for Origin Only Clustering, we need to have our own caching system. What does get cached in a Live AV Chat? How do I propagate it to other Origins? What kind of plugins would I need for cache managing? What should the plugin do?
In the attached Origin Only Architecture, what does the Primary Origin do and Secondary Origin do? I thought Origin is the place where the application is actually running and Edges do proxy. Is it the same here in Origin-only clustering also? Are there any tools which can measure the lag in AV? (like performance measuring tools or load testing tools for FMS). What kind of software Load Balancer can we use for FMS clustering? (Like Nginx, Zeus or something?)
I have a task before me that I have not spent any time researching in the past because I never thought I would have to do it... I need some specific advice from some of you gurus out there.I need to set up a training facility in which we film a teacher in HD and broadcast it live across the internet to 30 locations around town. I also need to have a live chat going with the video in which any of the viewers can ask a question to the teacher and he/she can answer it in the lecture being given.
The 30 locations that the viewers will be at will be a board room setting with an HDTV on the wall , and maybe a wireless keyboard and mouse that they can share to chat with the teacher.I know I can quickly figure out all of the video stuff, like lighting and cameras. I really need advice on all of the technical stuff that it takes for the live broadcast on the internet.
I imagine that I will choose a content delivery network, but which one? I imagine that I will use Flash Media Server, but which version? Do I need a real time transoding device to feed the analog HD video signals to to feed it to the computer? The company has T1, is it fast enough on the uploading to get what we need done?
I have been testing a project with no license key(Dev) and last week I purchased a Flash Streaming license but I go into the fms.ini and insert the key and restart FMS but my streams no longer work and the only error I seem to be getting is: Found Connection Penalty (RTMFP) on core launch, penalty active since time 1294334608.351221 I remove the key and restart the service and everything works fine.
I even tried reinstalling FMS and provide it the key when it asked in the installer but same issue. Is this error related to an issue with the licensing key? There is no error when I remove the key but can't get support through contacting Adobe by phone. I asked what is the proper way to install the key and they said they would open a ticket and contact me back but its been 2 days not including the weekend, I thought it would be a very simple question for the FMS dept that I was speaking with.
I have installed FMS 4.5 successfully. I am able to run all the videos in the index.html page (filmthos.com/flash), including the HLS video on my Iphone. I was able to setup a video player for rtmp and it works fine, but I am having trouble with setting up video players for HLS and HDS. I am looking for somthing simple.
The source file or located in these location: /hds-vod/mvp5/media/MP.mp4.f4m and /hls-vod/mvp5/media/MP.mp4.m3u8 respectively (the httpd.conf location for both is HttpStreamingContentPath "/opt/adobe/fms/applications"). So obviously I want a simple video player for the HDS that plays flash and another to play HLS and HTML5. The index.html seems to cumbersome to fine out how these players work.
Is it possible to use origin/edge setup when streaming using HDS ? I have succesfully tested using RTMP but when I try the HDS string - get error "we are having problems with playback". I can view the stream directly if I connect to the origin server. I have 1x origin server and 1x edge server.
View 2 RepliesNo I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
View 13 Repliesi have a orgin server and 2 edge servers and a load balancer
first off im confused in each edge server i set them to be remote, rtmp and changed the routeentry to <RouteEntry>*:*;96.44.***.***:1935</RouteEntry> on both servers
orgin server is just local
what my question is im streaming to orgin and its getting sent to 1 edge and other edge is doing nothing no traffic the stream i set it this way url:
'rtmp://173.254.***.***/live/live_test',
which is the 1 edge thats working if i setup another channel pointing to the other edge server ip adresss it doesnt work.. what am i doing wrong isnt all this supposed to be load balanced or am i missing steps...or did i do it wrong on the flash player config.
When I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
Has anyone setup FMS to stream to a blackberry device?
View 1 RepliesWhen I downloaded a developer edition from Flash Media Server page (11 Oct 2011). I tried to follow the setup instruction in readme.htm which comes in the zip of Linux version.
I logged in to terminal as root user and call './installFMS' and then the terminal show me:
ERROR: Your operating system is not supported by the Adobe Flash Media Server installer.
Does it mean Flash Media Server Developer Edition cannot work on OS X Lion (10.7)?
I have a load balancing problem for example I have two FMS servers I want to make aconnection between them if the first server overload the second can handle the request
View 1 RepliesI am trying to set up my video site to stream from the fms server¯ and the instruction stated that I should create my own new folder in the application directory on the fms server, and I have created my directory, which I called brigma_streams¯, and I have copied files from {FMS-Install-Dir}/ sample/Application/vod to my new folder.
[Code]...
We are planning an implementation that would be setup as automatic failover in the event of a disaster. We only have two physical servers (Windows 2008 R2 based). What is everyone's suggestion? I read a lot about origin-only cluster and origin-edge clusters. It seems like origin-only cluster would work best for this type of fail over but I'm not sure. We would most likely use Microsoft network load balancer built-in on Windows 2008 R2. We have the option of using remote storage but could also do local storage. The types of streaming would be videos loaded to the server (not live). Let me know any suggestions to achive an automatic failover with two physical systems
View 1 RepliesI'm stuck trying to get a Stream.play() call on a recorded video file (.flv) to translate from origin to edge servers. Don't even know if it's possible. If I call Stream.play() on a server, and connect a viewer directly to that server, the viewer sees the stream play. If I call Stream.play() on an origin server and connect a viewer to edge servers the stream does not play.
Is it possible to configure in any way that the play() call would propagate to edge servers? According to FMS 3.5 docs on the Stream class, the following is the case:
"When you call Stream.play()on the server, the server becomes the publisher."
See [URL].
If that server becomes a publisher and lets say it was an origin server on a CDN, shouldn't the other machines in the configuration receive the published stream? Somehow when you publish a live stream to an origin server it makes its way to edge servers. Is this analogy not relevant to the scenario wherein you call Stream.play() on a recorded file?
I have a question regarding FMS 3.5 and live streaming with failover protection. Currently, we are running a single server with FMS 3.5 for our VOD and live streaming events and its been working great. Recently during our last live video stream the server decided to die and naturally the live stream was lost. To prevent such a future scenario from happening, and given that I am on limited budget what would be a best method of prevention. I saw there is limited documentation on setting up origin to edge, or two origin servers (more likely for us since we can maybe purchase one more server at this time) but I do not have access to make network/router changes etc. I do have full access to configure my Windows 2003 servers however.
View 2 RepliesI have a case where I'm displaying 3 videos simultaneously using FMIS 3.5. When one is selected it will play the other two will switch and show a videoloop.
What is the proper way to accomlishing this. I actually have 6 videos (3 loops and 3 videos). Do I need a netconnection/netstream/video object for all of them or can they share something. What is the best practice?
I am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI am facing a strange issue with a pair of FMIS servers set up with Multipoint Publishing. Configuration is as follows:
Encoder >>>> FMIS1 >>>> FMIS2
When freshly started, I am able to view live streams from both servers, however, periodically, FMIS2 unpublishes the streams as seen in the log below. When this happens lives streams are accessible from FMIS1 but not FMIS2. In order to resume live streams on FMIS2, FMIS1 must be restarted.
Logs:
2010-09-01 14:31:00 9244 (s)2641173 NGA_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 FTV_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 BBCWN_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 CTI_1 is unpublishing -
2010-09-01 14:31:00 9244 (s)2641173 CNN_1 is unpublishing -
.....
setup multicast event with recorded videos not with live stream. how to setup multicast address that ask in multicast configuration utility....
View 1 RepliesIs there a way to enable a vhost without having to restart the entire fms server?It seems very horrible that you would have to kill everyone using the server to add new vhost?
View 8 Repliestell me the difference between the Allow directive in Vhost.xml file and the one in Adapter.xml file? The PDF on FMS says about Allow in Vhost.xml:"This element is a comma-delimited list of domains that are allowed to connect to this virtual host. The default value isall. If the Allow element is left empty, the only connections allowed are those coming from the same domain."
While it says the following about Adapter.xml:"A comma-delimited list of host names, domain names, and/or full or partial IP addresses from which clients canconnect to the server."I can't see any difference?I'd guess one specifies domains that hosted SWFs can connect to server from, while the other specifies client-side hosts which can connect to the server.. However it is not clear to me which is which.
I've watched a really helpful tutorial on FB4.5 for PHP by Mihai Corlan and am hoping to use some of his techniques but would like to use a different PHP server because Zend Server costs money and I'd rather avoid polluting my workstation with still more daemon-type services. I've set up numerous Debian and CentOS servers from scratch and would like to configure FB4.5 for PHP so that I can debug both my Actionscript and PHP. Has anyone done this? I could certainly used advice from someone who's gone through all the trouble already. I'd very much like to capitalize on all of the ways that FB4.5 automatically generates code and creates links for you rather than writing all that stuff by hand.
View 1 Repliesmy goal is to set up an MP3 player, yes I know there are plenty of tuts some may say, however I'm trying to get, what I would call "fancy", with the buttons.The object is for my play btn to toggle to the pause btn and back all with roll over animation.So far I successfully toggled between the play btn and pause btn.The play btn has roll over animation and the pause btn has animation as well. The problem is that when I click the play btn and toggle the pause btn the pause btn goes back to the play btn when I want it to stay on the pause btn, but the roll over animation seems to cancel the toggle so when I roll off of the pause it goes back to the play. Here is the script:
import flash.events.MouseEvent;
function playbtnOver(event:MouseEvent):void
{[code].....
i'm trying to develop a multiplayer game in AS3, but i don't know how to use the sockets, how to set up my server, actually i don't know how to start, i want to build a peer to peer game, which will have a "room" to find players, it will be a cars game, i already have all the rest of the game, i just need to be able to make it multiplayer
View 3 RepliesI have gotten the vhost to work with the owner of the applications folder set to root:rootI need to allow them access to their files by cpanel and for that to work their files have tobe owned by their user name user:user well they vhosts can't be accessed unless itsroot:roo
View 3 RepliesI have a streaming server (for pushing data not video) setup with GraniteDS and it works great. I have to include multiple swf files in a web page. Each of these swf files has a data table which includes streaming data(this is a specific requirement - so I really cant combine all data tables into 1 huge data table/swf file). All the swf files however, connect to the same gravity channel/streaming endpoint.
How many connections are there from the web page to the streaming server? Does each swf file start a new streaming connection? Or do all them share the same connection since they are just connecting to a single channel?
I would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 Replies