Media Server :: FMS Not Responding Properly For Publish Command
Jun 13, 2011
I am developing a flash media encoder. Encoder is sending 'publish' command in 'record' mode to FMS. But FMS is not giving any response (I am catching responses in wireshark) but creating the related folders in its application directory. So, I assumed that FMS has received the publish command and reay to receive the data. Then I sent some 20 media messages each of soze 500 bytes. FMS is sending 'onStatus' response for the publish after receiving the 8th media message and writing only contents of media messages from 9th to 20th.
View 1 Replies
Similar Posts:
Sep 30, 2010
What would be some top reasons an FLV will not stream with Flash Media Streaming Serve 3.5? I ran the FLVcheck.exe on the FLV and it passed; however, the FLV will not stream. If I could just get some good reasons that would cause an FLV from streaming I think that will give me a good starting point for troubleshooting.
[Code]....
View 3 Replies
Jul 5, 2011
My clients use Flash Media Live Encoder to publish the audio+video to my server. In some case, I want to allow my clients to publish only Audio and no video but I cannot control it via the FMLE, they can even select the video to publish.
I wanted to know if there is any way in which on the server side, I can allow my client to publish only Audio and no Video?
View 1 Replies
Jul 28, 2010
have an error in the publication of a Live (Webcam) to a CDN (Level3).when "ns.publish (STREAM_NAME 'live')" 'it is returned an error"NetStream.Record.NoAccess 'Thank you to those who use AS3 application to connect to their CDN (Akamai, Level3 ...) oftell me if they encounter a problem.I use the same code has always been to publish a Live (Webcam) to serversstreaming (FMS RED5, etc ...) and can be summarized as follows:nc = new NetConnection ()nc.connect (HOST_URL)../..ns = new NetStream (nc)ns.publish (MON_STREAM 'live') this works on all versions FMS 2.5, 3.0, 3.5, etc. ..Since a migration of my FMS version 2.5 to 3.5 this code does not work anymore!the worst is that Flash Media Encoder (FME 3.0) it is operating properly.So is there a feature to broadcast a live publishing point on a CDN (LEVEL3)?The CDN turning on the fact that if it works with FME is that it is the code that raisesproblem ... without more information.The FMS version uses "special" of FMS, but until now I had no worries!In general the user CDN use hardware encoders ...
View 4 Replies
May 31, 2011
i have problem with publish with fms.i have a song play in back i have microphone to sing and camera when publish in mp4 the voice is ok and camera good. But the song play in background dont have good quality.
1- can i separate voice and song in my microphone? if yes do you have an exemple? because the sound o f voice is ok but song in background not good
2- else can mix my original song mp4 to camera and microphone? and publish record all with fms?
View 5 Replies
Jul 3, 2011
i am building an live streaming website and i am use
1- FMS
2- Apache webserver
i have made the subcriber and i works well .but i need to build the publisher to allow users to broadcast thier stream from thier cameras.i have tested a publisher which was build using actionscript and it didn't work untill i have installed the fms on my localhost , but i need a publisher which any user can use in his web browser .
View 1 Replies
Nov 16, 2011
I want to build an application to stream h.264 video from the browser, how can I be able to do this? I can't seem to find the playerglobal.swc anywhere, I have Flash CS5.5
View 1 Replies
Apr 5, 2012
"To serve streams over a cellular network, one of the streams must be audio-only. For more information, see HTTP Live Streaming Overview.To publish an audio-only stream, enter the following in the Flash Media Encoder Stream field:livestream%i?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_only&adbe-audio-stream-src=livestream1If the encoder specifies individual query strings for each stream, use individual stream names instead of the variable %i:livestream1?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_onlylivestream2?adbe-live-event=liveevent&adbe-audio-stream-name=livestream2_audio_onlyTo generate a set-level variant playlist when using an audio-only stream, specify the audio codec of the audio-nly stream. Specify the audio and the video codec of the streams that contain audio and video.For more information about using the Set-level F4M/M3U8 File Generator, see Publish and play live multi-bitrate streams over HTTP.
View 7 Replies
Jan 9, 2012
We run about 20 FMS servers through Amazon AWS using the Adobe AMI: fms-4.0.1.8011-centos-5.5-ami-1 (ami-6a1deb03)On some of the servers we get fmscore segfaults, which kills the apps instances and make it impossible to launch new app instances. I am having a hard time finding out whether this could be due to errors in our code or if there is some kind of instability in the FMS. It does seems to happen only on the FMSs that are most heavily used.
var/log/message
Jan 7 17:09:15 domU-12-31-39-18-08-75 Stream[30456]: Bad network data; terminating connection : chunkstream error:message bytes 128 are more than the specified message length
[code]....
View 6 Replies
Feb 9, 2010
I'm working with CS4 and AS3 using timeline coding. I have three sets of movie clips in three different arrays. The idea is to have topArray and downArray movies make zeroArray movies visible. For instance, if topArray[0] and downArray[0] are clicked, then r0_0 becomes visible. PROBLEM: r0_0 becomes visible when EITHER topArray or downArray is clicked. How to make r0_0 wait until BOTH top and downArray movies are clicked?
ActionScript Code:
//
//movie clips holdings results -- all invisible
var zeroRow:Array =[r0_0, r0_1, r0_2, r0_3, r0_4, r0_5, r0_6, r0_7, r0_8, r0_9, r0_10];
for (var a:int=0; a<zeroRow.length; a++) {zeroRow[a].visible=false}
[code]....
View 4 Replies
Oct 12, 2009
I need to protect my FMS, so that only me (my Username, or IP if its not possible) can start a live stream. I have been reading the pdf on plugin for developers, and i read that the authorization plugin can do this, but it is C++ and i dont know nothing about that, i can understand a little bit, but i do not know how to make the dll i want. Is there another way to do this, the server requests a user and password when i want to stream.
View 10 Replies
Sep 21, 2011
Can I stream/publish all methods at the same time?I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.
View 6 Replies
Nov 15, 2011
i've created a sub-folder called dvr under fms 4.0 applications. i made a test of playing a video named sample.flv then at the same time i publish it to the same fms 4.0 server with a different video name: "mergedVideo".the asc at the fms server as following:
application.onAppStart = function()
{
trace("app start : " + application.name);
[code]...
View 1 Replies
Feb 10, 2012
I have FMLE source streaming to FMS #1, and FMS #1 is multipoint publishing to FMS #2. It works great, but when I stop FMLE source, the multipoint publishing from FMS #1 to FMS #2 doesn't stop (unpublish), and continues to stream empty (blank black) stream between the FMS servers. So how do I ubpublish the multipoint publishing streams on the FMS #1? Here is my code in application live on FMS #1:
[Code]...
View 3 Replies
Mar 5, 2012
I've installed Flash Media Server and send stream to it use Flash Media Live Encoder via [URL]. And on my website, I've embed code to play this live stream via [URL]. All ok!
But, any user can install Flash Media Live Encoder and connect to my FMS, publish his/her stream (because url to publish and view is same) My question is: how to prevent end-user publish stream to my FMS, only allow end-user view my live stream?
View 3 Replies
Jan 5, 2011
We have one video application in this application an user can record a video of 30 seconds. Timer is not getting fire after 30 seconds only on one computer on other computers it's getting called except that computer. Frankly speaking we don't know about the computer configuration on which timer is not fired after 30 seconds. Can any body suggest us what's the problem? Where we are lagging?
We are considering this is due to older version of flash. Correct us if we are wrong. May be due to browser dont know what's the problem.
View 5 Replies
Jun 23, 2011
We have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 Replies
Dec 6, 2011
I have some problems about installing FMS 4 on a CentOS 6 x64. After installing, FMS doens't start properly. I don't see the videos on the web interface. In the log file master.00.log, i can see these errors messages
2011-12-0608:38:461675(i)2581226Edge (1748) is no longer active.- 2011-12-0608:38:461675(w)2581255Edge (1748) _defaultRoot__edge1 experienced 1 failure[s]!- 2011-12-0608:38:461675(i)2581224Edge (1798) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
[Code]...
View 8 Replies
Jan 9, 2010
I have some textfield buttons which is basically textfields in sprites.The problem is that the textfields/sprites responding to MouseEvents properly.
eg. the alpha and rotation property doesn't work.
if I say set text button to alpha = 0 on mouse over it does nothing, or if i say set rotation to 180, the text button just disappears.
Has it got something to do with embedding fonts?and why when I embed my fonts do they not show?
View 4 Replies
Jun 30, 2009
I want to publish and record video stream in h.264 and audio stream in AAC format . Does flash player support to publish video stream in h.264 format ? And which version of flash player and FMS could implement this function ?
View 2 Replies
Jan 4, 2010
I have a requirement of publishing static content like video files mentioned in a playlist to be published to a live stream. It is like creating a TV station with pre-recorded content but with live stream. It will great if anyone let me know is it possible with FMS?
View 1 Replies
May 5, 2010
I know the FMS is good for streaming things video to clients and for clients to publish videos from their attached camera. Is it possible for a client to publish something other than a stream from a connected camera, for example, the contents of my swf stage? Is it possible to draw something like a text overlay onto a published stream?
View 1 Replies
Aug 4, 2010
I've searched quite a few threads:[code]But all of them are talking about playing multiple bit rate live video,my question is how I can publish multiple bit rate live videos in the first place?
View 2 Replies
Oct 3, 2010
So far I only find the way to publish camera video as stream: attachCamera()
Is it possible to publish self-composed bytes array as video ?
View 10 Replies
Jan 27, 2011
That is , I don't need to terminate the current publishing video then republish again.I just want to change the publish mode,maybe from live to recorded mode.
View 3 Replies
Aug 17, 2011
I've noticed an issue while creating one way (A publish B play) stream through RTMFP. When I try to create connection between computers behind the same NAT (same IP) stream playing is not fired at all, but on the other hand the same code works on remote computers (different IPs).This issue arose after releasing final release of Flash Player, in a beta release everything works fine.We checked NAT settings and there are no differences for this cases.
View 3 Replies
Mar 26, 2012
I want to use customised encoder to publish live steams to a FMS4.5 server?Is it possible to connect encoder and FMS4.5 server on HTTP protocol?i read in other articles FMLE can connect to FMS on RTMP protocol.
View 4 Replies
May 29, 2009
Is there anyway that i could send a php command to unload a live stream?
For instance i would like to click a logout button that would then tell the server that im logging off that live stream.
Here is what i have in my SWF file now..
[Code]....
I am sending flashvars to fill in the variables. And this is actionscript 2 because i havent ventured to AS3.
View 2 Replies
Sep 7, 2010
I carefully read forums for phpmyadmin before posting here and none really had the answer. I am able to install phpmyadmin on stand alone versions of Apache, but unable to do so on the FMS version. I previously read this post [URL] and it doesn't seem to answer the question although it looks like part of the question may have been answered offline. The problem is that phpmyadmin installs and I know that PHP is running fine because I can run a couple of test scripts with no problem. However, when I go to login to phpmyadmin, I get the dialog box asking me "do you want to open or save this file" and the script itself never executes. I checked the the server log, and here's what's going on:
[Code]...
Based on the post noted above, I'm assuming this may have something to do with either POST variables or maybe proxying unknown requests, however the forum post didn't appear to resolve the problem. I also posted to that thread, but I wasn't sure it was still being monitored.
View 3 Replies
Apr 26, 2010
Can I send/publish MP4/H.264 video (live or record) to FMS from webcam? Another similar question; does Flash (10?) support H.264 encoder?
View 3 Replies
