I have a requirement of publishing static content like video files mentioned in a playlist to be published to a live stream. It is like creating a TV station with pre-recorded content but with live stream. It will great if anyone let me know is it possible with FMS?
View 1 Replies
I want to use customised encoder to publish live steams to a FMS4.5 server?Is it possible to connect encoder and FMS4.5 server on HTTP protocol?i read in other articles FMLE can connect to FMS on RTMP protocol.
View 4 RepliesI am developing a C++ program to connect FMS via RTMP, and then publish a live stream I can't use FMLE here because I need collect the H.264 NALU from somewhere and forward them to the FMS.I write a demo app, which parses H.264 encoded FLV file, and send the VideoTag in the FLV as RTMP Message content for publishing.Finally, I make it run and I can see some frames of video!But the problem is: The video does not play smoothly and it just updates some frames.
Then I looked at the NetStream event and found that:Everytime when there is a NetStream.Buffer.Full event, the frame in the video is updated and display correctly But immediately there is another NetStream.Buffer.Empty event followed and the video is frozen.
[code]...
I want to make sure that only authenticated users are publishing streams to my Adobe Flash Media Server.
Ideally I would like to limit the IPs which are allowed to publish streams to the server.
I read about the Adobe Authentication Plugin, but apparently it is broken since it works only for Adobe Flash Media Live Enconder. It doesn't secure the server for other encoders that publish streams.
We purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
Has there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
i am building an live streaming website and i am use
1- FMS
2- Apache webserver
i have made the subcriber and i works well .but i need to build the publisher to allow users to broadcast thier stream from thier cameras.i have tested a publisher which was build using actionscript and it didn't work untill i have installed the fms on my localhost , but i need a publisher which any user can use in his web browser .
"To serve streams over a cellular network, one of the streams must be audio-only. For more information, see HTTP Live Streaming Overview.To publish an audio-only stream, enter the following in the Flash Media Encoder Stream field:livestream%i?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_only&adbe-audio-stream-src=livestream1If the encoder specifies individual query strings for each stream, use individual stream names instead of the variable %i:livestream1?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_onlylivestream2?adbe-live-event=liveevent&adbe-audio-stream-name=livestream2_audio_onlyTo generate a set-level variant playlist when using an audio-only stream, specify the audio codec of the audio-nly stream. Specify the audio and the video codec of the streams that contain audio and video.For more information about using the Set-level F4M/M3U8 File Generator, see Publish and play live multi-bitrate streams over HTTP.
View 7 RepliesBeside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesI've searched quite a few threads:[code]But all of them are talking about playing multiple bit rate live video,my question is how I can publish multiple bit rate live videos in the first place?
View 2 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI need to protect my FMS, so that only me (my Username, or IP if its not possible) can start a live stream. I have been reading the pdf on plugin for developers, and i read that the authorization plugin can do this, but it is C++ and i dont know nothing about that, i can understand a little bit, but i do not know how to make the dll i want. Is there another way to do this, the server requests a user and password when i want to stream.
View 10 RepliesCan I stream/publish all methods at the same time?I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.
View 6 RepliesI've installed Flash Media Server and send stream to it use Flash Media Live Encoder via [URL]. And on my website, I've embed code to play this live stream via [URL]. All ok!
But, any user can install Flash Media Live Encoder and connect to my FMS, publish his/her stream (because url to publish and view is same) My question is: how to prevent end-user publish stream to my FMS, only allow end-user view my live stream?
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesMy rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesCan I send/publish MP4/H.264 video (live or record) to FMS from webcam? Another similar question; does Flash (10?) support H.264 encoder?
View 3 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I Need to Broadcast 20,000 to 40,000 Live Streams.! (Bitrate : 128Kbps / Viewers Per Stream Apprx-10 Server : Adobe FMS Server Amazon EC2 Instance - Bandwidth Apprx 100mbps)My Question is1. How Many Concurrent connections Possible for one Adobe FMS Server? (Amazon EC2 Instance)2. is this possible to use RTMFP for this process? (20,000 Connections Via Amazon Adobe FMS Server EC2 Instance )3. if Possible Over RTMFP then How Many Developer Keys Need for this Operation. (or) Pricing Details for the Developer Key. (or) Any Separate Key[s] Available For Amazon EC2 Instance?
View 1 RepliesI want to publish and record video stream in h.264 and audio stream in AAC format . Does flash player support to publish video stream in h.264 format ? And which version of flash player and FMS could implement this function ?
View 2 RepliesI know the FMS is good for streaming things video to clients and for clients to publish videos from their attached camera. Is it possible for a client to publish something other than a stream from a connected camera, for example, the contents of my swf stage? Is it possible to draw something like a text overlay onto a published stream?
View 1 RepliesI've noticed an issue while creating one way (A publish B play) stream through RTMFP. When I try to create connection between computers behind the same NAT (same IP) stream playing is not fired at all, but on the other hand the same code works on remote computers (different IPs).This issue arose after releasing final release of Flash Player, in a beta release everything works fine.We checked NAT settings and there are no differences for this cases.
View 3 Replies
