Media Server :: Publish To FP11 With H.264 Encoding?
Nov 16, 2011
I want to build an application to stream h.264 video from the browser, how can I be able to do this? I can't seem to find the playerglobal.swc anywhere, I have Flash CS5.5
View 1 Replies
Similar Posts:
Feb 3, 2012
I have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings();
h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
View 1 Replies
Mar 29, 2011
I have already installled Flash media Development server. I need to workout this tutorial.But i am unable to see the Encoding Srever console .. How do i setuop this?
View 1 Replies
Dec 17, 2009
After installing FMS 3.5.1, anybody can use my server for live enconding. How can I configure the server to authorise live encoding only from subdomain 1234.4567 or by a password?
View 3 Replies
Jan 26, 2010
We just found out someone is bouncing a pirated feed off our FMIS 3.5.2 server. after months of not having to look at this thing (and not remembering crap about parts of the setup), I'm trying to discover a few things.
First is, how do we tell FMIS which vhost allows live encoding? Second, as I look at the logs and logger.xml, I'm trying to tell how to force it to show the ip's of inbound/outbound traffic. Think I'm doing the right things to the file, but the log for the application/entry point the pirate is using doesn't show what I believe I configured to be the fields that should show up in the log. Finally, trying to figure out how to force authentication of media encoders talking to the server. I'm scanning the online help docs, etc. trying to remember all this stuff.... but if anyone can say "look at this page in the pdf, and this page in the online" to affect what I need to do to lock this up quick,
View 3 Replies
Jun 23, 2011
We have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 Replies
Apr 21, 2009
when doing a live encode with Flash Media Live Encoder 3 to FMS 3.5, the encoder disconnects randomly after 1 to 8 minutes.It takes about 50 seconds for the encoder to recognize the lost connection, then it re-connects. I tried to encode from different locations, but the problem remains.
View 2 Replies
Apr 24, 2009
I use H.264 Video Format,25fps,800x600 size,1000Kbps.Start the encoding,the CPU utility rate is going up to the 90%~100% percent.Plenty of video drops.For to reduce the cpu utility rate ,i want to use the hardware encoding of the nvidia geforce or the ati videocard.Are the FMLE3 support the hardware h.264 encoding?
View 1 Replies
Apr 21, 2010
We set up a Flash Media Server and we are trying to figure out how to protect our live encoding url. Seems like anyone with a Flash Media Encoder and who knew the location of our server could publish a live stream.
View 13 Replies
Mar 8, 2011
I need to find out how to layout my bitrates and widths in a way that will:make the switching between to levels (video qualities) as smooth as possible.support a wide range of bw (bandwidth). User with large bw should be fed with a high quality vid and users with low bw should be fed with a low quality vid.support both player widths: 416x240px and 640x340px without doing two different bitrate/with layouts. I have tested the following bitrate/width layot:Q5-Q8 is ment for fullscreen view, Q1-Q2 is ment for our small player and Q3-Q4 is ment for our large player.It works but I'm far from sure that it is the optimal layout. For instance, is it a problem that to videos with different widths have the same bitrate settings or bitrates that lay close to one another?As far as i know, the player (JW Player) will not choose a video that is more than 20% wider than the players width.
View 1 Replies
Jul 13, 2011
how to get the encoding of a media (PAL, NTSC)? (I´m using Adobe flash media server)
View 7 Replies
Aug 19, 2011
How can I receive a 1.5Mbit stream from Flash Media Live Encoder and then re-encode it to 2 different streams?t's much like what Ustream is doing. They receive one high-quality feed, and then re-encode to a couple of different qualities in realtime.
View 11 Replies
Apr 24, 2009
The Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%. I want to konw,which kind of the CPU can support the live stream. In other words,My require is encoding the one live stream the cpu utility rate is below 30%.
View 2 Replies
Oct 21, 2011
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 Replies
Feb 3, 2010
We just shipped Xuggler 3.4 this weekend which now has the ability to record and publish RTMP streams. That means you can now write Xuggler (a Java API for encoding and decoding video) programs that can publish to FMS or record from FMS.
We've worked closely with the FFmpeg team to get the core RTMP stack into that project, and have put together a tutorial on how to use FFmpeg to record or publish streams, including re-encoding media to H264/AAC while publishing.
View 7 Replies
Jul 5, 2011
My clients use Flash Media Live Encoder to publish the audio+video to my server. In some case, I want to allow my clients to publish only Audio and no video but I cannot control it via the FMLE, they can even select the video to publish.
I wanted to know if there is any way in which on the server side, I can allow my client to publish only Audio and no Video?
View 1 Replies
Jul 28, 2010
have an error in the publication of a Live (Webcam) to a CDN (Level3).when "ns.publish (STREAM_NAME 'live')" 'it is returned an error"NetStream.Record.NoAccess 'Thank you to those who use AS3 application to connect to their CDN (Akamai, Level3 ...) oftell me if they encounter a problem.I use the same code has always been to publish a Live (Webcam) to serversstreaming (FMS RED5, etc ...) and can be summarized as follows:nc = new NetConnection ()nc.connect (HOST_URL)../..ns = new NetStream (nc)ns.publish (MON_STREAM 'live') this works on all versions FMS 2.5, 3.0, 3.5, etc. ..Since a migration of my FMS version 2.5 to 3.5 this code does not work anymore!the worst is that Flash Media Encoder (FME 3.0) it is operating properly.So is there a feature to broadcast a live publishing point on a CDN (LEVEL3)?The CDN turning on the fact that if it works with FME is that it is the code that raisesproblem ... without more information.The FMS version uses "special" of FMS, but until now I had no worries!In general the user CDN use hardware encoders ...
View 4 Replies
May 31, 2011
i have problem with publish with fms.i have a song play in back i have microphone to sing and camera when publish in mp4 the voice is ok and camera good. But the song play in background dont have good quality.
1- can i separate voice and song in my microphone? if yes do you have an exemple? because the sound o f voice is ok but song in background not good
2- else can mix my original song mp4 to camera and microphone? and publish record all with fms?
View 5 Replies
Jul 3, 2011
i am building an live streaming website and i am use
1- FMS
2- Apache webserver
i have made the subcriber and i works well .but i need to build the publisher to allow users to broadcast thier stream from thier cameras.i have tested a publisher which was build using actionscript and it didn't work untill i have installed the fms on my localhost , but i need a publisher which any user can use in his web browser .
View 1 Replies
Apr 5, 2012
"To serve streams over a cellular network, one of the streams must be audio-only. For more information, see HTTP Live Streaming Overview.To publish an audio-only stream, enter the following in the Flash Media Encoder Stream field:livestream%i?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_only&adbe-audio-stream-src=livestream1If the encoder specifies individual query strings for each stream, use individual stream names instead of the variable %i:livestream1?adbe-live-event=liveevent&adbe-audio-stream-name=livestream1_audio_onlylivestream2?adbe-live-event=liveevent&adbe-audio-stream-name=livestream2_audio_onlyTo generate a set-level variant playlist when using an audio-only stream, specify the audio codec of the audio-nly stream. Specify the audio and the video codec of the streams that contain audio and video.For more information about using the Set-level F4M/M3U8 File Generator, see Publish and play live multi-bitrate streams over HTTP.
View 7 Replies
Oct 12, 2009
I need to protect my FMS, so that only me (my Username, or IP if its not possible) can start a live stream. I have been reading the pdf on plugin for developers, and i read that the authorization plugin can do this, but it is C++ and i dont know nothing about that, i can understand a little bit, but i do not know how to make the dll i want. Is there another way to do this, the server requests a user and password when i want to stream.
View 10 Replies
Jun 13, 2011
I am developing a flash media encoder. Encoder is sending 'publish' command in 'record' mode to FMS. But FMS is not giving any response (I am catching responses in wireshark) but creating the related folders in its application directory. So, I assumed that FMS has received the publish command and reay to receive the data. Then I sent some 20 media messages each of soze 500 bytes. FMS is sending 'onStatus' response for the publish after receiving the 8th media message and writing only contents of media messages from 9th to 20th.
View 1 Replies
Sep 21, 2011
Can I stream/publish all methods at the same time?I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.
View 6 Replies
Nov 15, 2011
i've created a sub-folder called dvr under fms 4.0 applications. i made a test of playing a video named sample.flv then at the same time i publish it to the same fms 4.0 server with a different video name: "mergedVideo".the asc at the fms server as following:
application.onAppStart = function()
{
trace("app start : " + application.name);
[code]...
View 1 Replies
Feb 10, 2012
I have FMLE source streaming to FMS #1, and FMS #1 is multipoint publishing to FMS #2. It works great, but when I stop FMLE source, the multipoint publishing from FMS #1 to FMS #2 doesn't stop (unpublish), and continues to stream empty (blank black) stream between the FMS servers. So how do I ubpublish the multipoint publishing streams on the FMS #1? Here is my code in application live on FMS #1:
[Code]...
View 3 Replies
Mar 5, 2012
I've installed Flash Media Server and send stream to it use Flash Media Live Encoder via [URL]. And on my website, I've embed code to play this live stream via [URL]. All ok!
But, any user can install Flash Media Live Encoder and connect to my FMS, publish his/her stream (because url to publish and view is same) My question is: how to prevent end-user publish stream to my FMS, only allow end-user view my live stream?
View 3 Replies
Jun 30, 2009
I want to publish and record video stream in h.264 and audio stream in AAC format . Does flash player support to publish video stream in h.264 format ? And which version of flash player and FMS could implement this function ?
View 2 Replies
Jan 4, 2010
I have a requirement of publishing static content like video files mentioned in a playlist to be published to a live stream. It is like creating a TV station with pre-recorded content but with live stream. It will great if anyone let me know is it possible with FMS?
View 1 Replies
May 5, 2010
I know the FMS is good for streaming things video to clients and for clients to publish videos from their attached camera. Is it possible for a client to publish something other than a stream from a connected camera, for example, the contents of my swf stage? Is it possible to draw something like a text overlay onto a published stream?
View 1 Replies
Aug 4, 2010
I've searched quite a few threads:[code]But all of them are talking about playing multiple bit rate live video,my question is how I can publish multiple bit rate live videos in the first place?
View 2 Replies