I use H.264 Video Format,25fps,800x600 size,1000Kbps.Start the encoding,the CPU utility rate is going up to the 90%~100% percent.Plenty of video drops.For to reduce the cpu utility rate ,i want to use the hardware encoding of the nvidia geforce or the ati videocard.Are the FMLE3 support the hardware h.264 encoding?
View 1 RepliesThe Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%. I want to konw,which kind of the CPU can support the live stream. In other words,My require is encoding the one live stream the cpu utility rate is below 30%.
I have already installled Flash media Development server. I need to workout this tutorial.But i am unable to see the Encoding Srever console .. How do i setuop this?
View 1 RepliesAfter installing FMS 3.5.1, anybody can use my server for live enconding. How can I configure the server to authorise live encoding only from subdomain 1234.4567 or by a password?
View 3 RepliesWe just found out someone is bouncing a pirated feed off our FMIS 3.5.2 server. after months of not having to look at this thing (and not remembering crap about parts of the setup), I'm trying to discover a few things.
First is, how do we tell FMIS which vhost allows live encoding? Second, as I look at the logs and logger.xml, I'm trying to tell how to force it to show the ip's of inbound/outbound traffic. Think I'm doing the right things to the file, but the log for the application/entry point the pirate is using doesn't show what I believe I configured to be the fields that should show up in the log. Finally, trying to figure out how to force authentication of media encoders talking to the server. I'm scanning the online help docs, etc. trying to remember all this stuff.... but if anyone can say "look at this page in the pdf, and this page in the online" to affect what I need to do to lock this up quick,
We have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 RepliesI want to build an application to stream h.264 video from the browser, how can I be able to do this? I can't seem to find the playerglobal.swc anywhere, I have Flash CS5.5
View 1 Replieswhen doing a live encode with Flash Media Live Encoder 3 to FMS 3.5, the encoder disconnects randomly after 1 to 8 minutes.It takes about 50 seconds for the encoder to recognize the lost connection, then it re-connects. I tried to encode from different locations, but the problem remains.
View 2 RepliesWe set up a Flash Media Server and we are trying to figure out how to protect our live encoding url. Seems like anyone with a Flash Media Encoder and who knew the location of our server could publish a live stream.
View 13 RepliesI need to find out how to layout my bitrates and widths in a way that will:make the switching between to levels (video qualities) as smooth as possible.support a wide range of bw (bandwidth). User with large bw should be fed with a high quality vid and users with low bw should be fed with a low quality vid.support both player widths: 416x240px and 640x340px without doing two different bitrate/with layouts. I have tested the following bitrate/width layot:Q5-Q8 is ment for fullscreen view, Q1-Q2 is ment for our small player and Q3-Q4 is ment for our large player.It works but I'm far from sure that it is the optimal layout. For instance, is it a problem that to videos with different widths have the same bitrate settings or bitrates that lay close to one another?As far as i know, the player (JW Player) will not choose a video that is more than 20% wider than the players width.
View 1 Replieshow to get the encoding of a media (PAL, NTSC)? (I´m using Adobe flash media server)
View 7 RepliesHow can I receive a 1.5Mbit stream from Flash Media Live Encoder and then re-encode it to 2 different streams?t's much like what Ustream is doing. They receive one high-quality feed, and then re-encode to a couple of different qualities in realtime.
View 11 RepliesI am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 RepliesWe're trying to stream Flash 9 .F4V files without any success so we upgraded to FMS 3.5, from 3.0, thinking that would do the trick, but they won't stream. I see MP4 support on Adobe's site, but not a word about .F4V support.
View 4 RepliesWe just shipped Xuggler 3.4 this weekend which now has the ability to record and publish RTMP streams. That means you can now write Xuggler (a Java API for encoding and decoding video) programs that can publish to FMS or record from FMS.
We've worked closely with the FFmpeg team to get the core RTMP stack into that project, and have put together a tutorial on how to use FFmpeg to record or publish streams, including re-encoding media to H264/AAC while publishing.
1. I entered a url in a video player : rtmp://10.0.0.1/vod/mp4:sample1_1500kbps.f4v
2. this video doesn't exist in 10.0.0.1 server. it is exist in 10.0.0.2.
3. the server 10.0.0.1 connect, play, and resource not found.
4. server 10.0.0.1 know that this video exists in 10.0.0.2 ,then redirect the whole url to 10.0.0.2. such as rtmp://10.0.0.2/vod/mp4:sample1_1500kbps.f4v
I see that the new Flash Media Servers were released. Looking over the information on the product pages, Flash Media Enterprise Server 4 is the only available product that supports RTMFP connections?
We currently have Flash Media Server 3.5 and our product utilizes RTMP connections, but I've been working with your Stratus Server and RTMFP and have found that the new protocol better fits our needs. However, the price for Flash Media Enterprise Server 4 is beyond our budget. Is there any possibility that RTMFP support are/will be available in the lower levels of Flash Media Server?
Good day - how do i create a support request for my new Flash Media Interactive Server? I've tried to contact our Russian Adobe support - but got a reply stating, that FMS is not supported by adobe support.. Btw - how can that be?! But, nevertheless - i do need to open a support ticket, as i have several problems, which interfere with production of FMS..
View 5 RepliesI read a blog article http:(url......)talking about switching between different bit rate video streams of the same video content on fly.But I can not find such ability in RTMP's specification.I am wondering if such function has to be implemented by users with ActionScript?
View 1 RepliesI'm trying to make a new flash player to stream a video from the vod folder. But after creating the player, the video doesn't show. It only shows the a blank screen with the player skin.
what's the format to put in the RTMPE url into the source/content path?
I installed FME 3.0 + FMS 3.5, and can get live stream on clients.
Now I want to record the live streaming from FME on FMS, I changed the fms.ini:
LIVE_DIR = d:Program FilesAdobeFlash Media Server 3.5webrootlive_recorded
but the streaming didn't be recorded in this folder.
Now it can only be done with the FMLE. Is there somewhere I can check the development plan for FMS besides here?
View 4 RepliesThe documentation is for FMS "4.5.1". Is PHDS for a live HTTP stream also supported in FMS 4.5? I tried setting Application.xml as instructed in the guide, and when I viewed the .f4m from the live stream, I did not see any indication that it was encrypted.
View 3 RepliesI would like to build a video conferencing app that supports H.264. Is there a way to use Flash to do that? I understand that Flash natively supports the Sorensen Spark video codec and that you need to use Flash Live Encoder 3 for H.264 encoding. I can't seem to find any documentation that shows me how to use FLE3 with ActionScript.
View 3 RepliesI have called Adobe roughly a dozen times today to speak to someone about purchasing the developer "incident support bundle." I've been told to call about a dozen different numbers, and still have not had any luck.
View 2 RepliesI need to perform encoding of a wav file into base64...
View 2 RepliesI want to post data to a URL on my server from a Flex app. I am using the following
UrlParam = UrlParam + '&name='+ name.text + '&business=' + buisness.text; navigateToURL(new URLRequest(UrlParams),'_self');
The problem I am having however is that if I enter a business with an ampersand ("A&b.com") then the name does not send. Does Flex have anything out of the box to do the encoding from & to %26?
Can Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI have a large flashvars string that I'm splitting into a 2d Array when it's pulled in flash. The problem I'm having is that one of the items of the inner array needs to be able to contain commas. The commas are encoded using php urlencode. I took the entire string printed on the web page and put it in a local var so I could test locally (by that i just mean without having to upload it to the server). So locally everything works fine, but when I upload it and use the real flashvars data, anything containing a comma and anything after that item, comes back as undefined.Here's an example of what part of the string in flashvars looks like. It would represent one item in the outer array.
"15;nameofstore;nameofstore;C32;;nameofstore%2C+Inc.+is+the+nation%27s +largest+
department+store+company+and+strives+to+be+the+department+store+of+cho ice+in+
each+community+it+serves+by+providing+superior+service+and+merchandise +that+
[code].....
I'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.