I read a blog article http:(url......)talking about switching between different bit rate video streams of the same video content on fly.But I can not find such ability in RTMP's specification.I am wondering if such function has to be implemented by users with ActionScript?
View 1 Replies
I have FMIS 3.5.I've installed it with pretty much all the default values.I haven't changed any of the settings in either the LIVE or the VOD applications.Dynamic Bitrate Switching is working well for VOD, but not working at all for LIVE streams.Doing a regular bandwidth detection on both the LIVE and the VOD applications give similar, high bandwidth results. However, the LIVE application NetStreamInfo.maxBytesPerSecond is showing a very low bandwidth capability of around maxBytesPerSecond = 19016, where as for the VOD its achieving around 637110.I can play a single LIVE stream of a high quality smoothly without any error.
I don't know if this is relevent but I'm getting some error messages occassionally in the log of the live application saying : Dropping application (live/_definst_) message. Clients not allowed to broadcast message.These messages aren't consistent, and don't coincide with trying to use bitrate switching.I have tried downloading the Adobe sample StreamSwitching. fla and it won't play the LIVE streams at all.Using the opensource Longtail Video player it just always defaults to the lowest stream.Here is an example: http:[url]....
I would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 Repliesis it possible to receive live stream at bitrate lower than that which video is being recorded with? How to accomplish that? I know that play2 from NetStream class allows to switch between recorded videos at different bitrates, but what about live content? I cannot simply set bandwidth to lower using FMS because i need to be sure that framerate won't be affected, and there are also other simultaneous streams playing .
View 3 RepliesI understand how clients use bandwidth detection etc to dynamically switch streams via client calls with ns.play2( ... ), but I was wondering if it's possible to only ever use 1 initial ns.play( ... ) call on the client side, but let FMS server side logic that I write dictate which client sees what content. For example, I have 3 clients connected to my FMS server, all watching a live stream. I then decide I want clientA to see 'recordedMovieA.flv', clientB to continue seeing the live stream, and clientC to watch 'recordedMovieB.flv'.
[Code]...
close another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI am having troubles finding a way to switch videos during a live stream. For example, broadcasting a show and switching to a commercial and then back to the live feed.
View 1 RepliesI build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
This is a bump and additional thought. The leap to my 1500k file happens when initial bandwidth detection happens as bandwidth is high. Then the computer can not handle playback of a 1500k file. Is there a way to force the player to actually start playing the 300k stream before making any step up to a higher stream?[URL].. Bitrate of currently playing stream is displayed in big numbers on the page. To see the problem you will need an older laptop or computer which would have trouble playing back a a high bitrate video stream.
the stream is dynamically switching through the DynamicStreamItem list of the same file at different bitrates. It works but the switching seems to take way too long. When the default file at 300k loads, the bandwidth test happens and the 1500k file loads. Then on a slow CPU machine the file switches back down as it sees frames are being dropped. This switching is happening way too slowly, it takes a good 45 seconds to switch its way down through the various files from 1500k to 300k again on an old powerPC laptop which can only play successfully at that rate.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI installed FME 3.0 + FMS 3.5, and can get live stream on clients.
Now I want to record the live streaming from FME on FMS, I changed the fms.ini:
LIVE_DIR = d:Program FilesAdobeFlash Media Server 3.5webrootlive_recorded
but the streaming didn't be recorded in this folder.
I'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
I would like to build a video conferencing app that supports H.264. Is there a way to use Flash to do that? I understand that Flash natively supports the Sorensen Spark video codec and that you need to use Flash Live Encoder 3 for H.264 encoding. I can't seem to find any documentation that shows me how to use FLE3 with ActionScript.
View 3 RepliesHas there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesSomebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesMy rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesWe purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I Need to Broadcast 20,000 to 40,000 Live Streams.! (Bitrate : 128Kbps / Viewers Per Stream Apprx-10 Server : Adobe FMS Server Amazon EC2 Instance - Bandwidth Apprx 100mbps)My Question is1. How Many Concurrent connections Possible for one Adobe FMS Server? (Amazon EC2 Instance)2. is this possible to use RTMFP for this process? (20,000 Connections Via Amazon Adobe FMS Server EC2 Instance )3. if Possible Over RTMFP then How Many Developer Keys Need for this Operation. (or) Pricing Details for the Developer Key. (or) Any Separate Key[s] Available For Amazon EC2 Instance?
View 1 RepliesI have a HD Camera streaming a live feed through FME 2.5 to FMS 3.0 using the VP6 codec and it works fine. I have now been trying to get the same stream running via H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the stream starts with FMS 3.0 reporting the stream no problem. The Client application crerated with Captivate 3 using Flash Player 9 for publishing no longer dispays the video. Switching back to VP6 works again.
View 4 RepliesI'm running the Interactive Flash server 3 and I'm wondering is there a way to give people a user & password to limit who can live stream into the server.I can do this with the Real server and Windows media fairly easily but having problems figuring out how to on the flash server.Currently if you have the Servers IP and the flash encoder you can stream with no Username or password required. I would like to restrict this.
View 3 Repliesi have an urgent question for the following purpose. We plan to develope a solution consisting of a sender software for streaming live video to the streaming server. Now more than one client should be able to connect to the stream of the server. Because the different clients are connected with different bandwidth rates the server should be able to convert the video stream (e.g. the video width and height, framerate and quality) on the fly. Maybe a client with a better connection than DSL should get the video in a resolution
of 640x480, a DSL client should get the video in 352x288 and a client with ISDN in 176x144.
Is there a possibility to do this with the FMS server on the server with server-side ActionScript? Or can I limit the requested stream size on the client side? Or anything I can do?
i need to stream a live TV Online. I have a computer with windows server 2003 and i wiil instal the adobe flash media server. I need to understand whow i can do this. I am a bigginer, what is the steps for i build a flash media server.
View 2 RepliesMy fmis server is 3.5.4 and I use flvPlayback to play the fms live stream.
I want to let the live stream stopping status after be load completed.but after I set the autoPlay=false, the fms live stream is not stopping status after be load completed.
However I try the fms vod stream as the autoPlay=false ,is can stop .
what's different the live stream and vod stream. why the vod stream can stop but live stram can't stop?
