I would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 RepliesI could contact about building a custom live Flash media encoder for our website. We have a database for authentication and a list of upcoming events with stream information (FMS URL and Stream Name) that we want to automate into an encoder. Currently we have our customers use Flash Media Live Encoder and copy/paste the values into the encoder, but would prefer a solution that is more tightly integrated with our site
View 4 RepliesHas there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
I am using Flash media live encoder 3.1 to broadcast to flash media server.
Its is possible place a image logo with the media live encoder??? How i can do this?? I like that my broadcaste have a image logo.
I have installed the Authentication Add-In on a FMS 3.5.5 Development version, running Windows 2008 Server.I can easily get to the users.exe command prompt and add users with no problem.BUT, when I open the Flash Media Live Encoder and go to enter a username/password when connecting to the server, I keep getting "User Not Found".I've went back several times using users.exe and tested for my user credentials and it always states that the user is there.
View 1 RepliesWhen using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio.
View 1 RepliesAre you preserved only in the local though provide the recording function in FME?It will be able to record directly in FMS.
Does the recorded image preserve the image from the camera directly or is what has flowed by way of FMS preserved?
i have got a video application using FLVPLAYBACK component. isLive=true, rtmp://application/live/demo Flash media live encoder 3 the instance is demo. Everything works fine.I need to know when Flash Media Live Encoder 3 is off-line. how i can do that FLVPLAYBACK detect this action and the client is disconnected. i try using buffering but i don't know, how take a time for it. for example is 5sec in buffering do another action or is there some function that detects when there is off-line?
View 2 RepliesThis is sort of a follow up to my previous post, asking about streaming through FMS to Apple and Android.Android and Blackberry devices require that the audio component of video streams be encoded using AAC. Right now I'm telling my customers to buy the MainConcept AAC plugin, or to buy VidBlaster or Wirecast. Can anyone from Adobe comment on when Adobe might release a version of FMLE that includes AAC?
View 6 RepliesI am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI have a web app that connects two computers and streams video to each other like a video conference. It currently works and also records the video in .f4v format. I am trying to figure out what I need to do to enable the client pc's to stream in H.264. Is it true that I have to use some type of encoder (like Live Encoder) to use H.264? If so, does Live Encoder have to be installed on the client computers? If that is true, is there a way to install the live encoder through our web app, configure it, and close it down when the conference is over, with no interaction from the client? Is there some type of plug-in that we could use that would eliminate the need for installing live encoder on the client computers?
View 2 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
We are testing Flash Media Server 3.5 with Flash Media Live Encoder 3. Right now we have the problem, that we can not connect from FM Live Encoder 3 to FMS 3.5 running on the localhost (M:AdobeFlash Media Server 3.5Apache2.2). Both running as Standard Installation on the same System (OS: Windows XP SP2). The User is not found. So where do we have to setup the user, so that the connection is possible
[Code]...
Allright, so i'm searching for information on how to write plugins for FMLE 3.0, the reason is that i need to extend some functionality regarding the metadata injections. So, does anyone here know of an API/Framework/SDK like paper that is a good place to start reading? Any input will be welcome, except "nay sayers" because i know it's possible to make plugins, ive seen one or two out there, just dont know where to start.
PS. I have plenty experience in writing DLL's for windows applications, but i would rather refrain from reverse-engineering FMLE to use windows hooks and insert dll's at run/loadtime, would rather have a more or less "intentional" framework to work with.
I read a blog article http:(url......)talking about switching between different bit rate video streams of the same video content on fly.But I can not find such ability in RTMP's specification.I am wondering if such function has to be implemented by users with ActionScript?
View 1 Repliesis it possible to receive live stream at bitrate lower than that which video is being recorded with? How to accomplish that? I know that play2 from NetStream class allows to switch between recorded videos at different bitrates, but what about live content? I cannot simply set bandwidth to lower using FMS because i need to be sure that framerate won't be affected, and there are also other simultaneous streams playing .
View 3 RepliesWhat I'm looking to do is have a flash player that constantly plays a loop of videos, but it automatically switches to our live stream whenever we start the encoder. Is this possible, and if it is...how can I do this?
View 2 RepliesI am having troubles finding a way to switch videos during a live stream. For example, broadcasting a show and switching to a commercial and then back to the live feed.
View 1 RepliesI have FMIS 3.5.I've installed it with pretty much all the default values.I haven't changed any of the settings in either the LIVE or the VOD applications.Dynamic Bitrate Switching is working well for VOD, but not working at all for LIVE streams.Doing a regular bandwidth detection on both the LIVE and the VOD applications give similar, high bandwidth results. However, the LIVE application NetStreamInfo.maxBytesPerSecond is showing a very low bandwidth capability of around maxBytesPerSecond = 19016, where as for the VOD its achieving around 637110.I can play a single LIVE stream of a high quality smoothly without any error.
I don't know if this is relevent but I'm getting some error messages occassionally in the log of the live application saying : Dropping application (live/_definst_) message. Clients not allowed to broadcast message.These messages aren't consistent, and don't coincide with trying to use bitrate switching.I have tried downloading the Adobe sample StreamSwitching. fla and it won't play the LIVE streams at all.Using the opensource Longtail Video player it just always defaults to the lowest stream.Here is an example: http:[url]....
is there a possibility of authentication FMLE users to the server on the FMSS? Or such a possibility exists only in the FMIS? Actually, somebody had to deal with this problem? Decide whether it?
View 1 RepliesI would like to build a video conferencing app that supports H.264. Is there a way to use Flash to do that? I understand that Flash natively supports the Sorensen Spark video codec and that you need to use Flash Live Encoder 3 for H.264 encoding. I can't seem to find any documentation that shows me how to use FLE3 with ActionScript.
View 3 RepliesI have installed the Flash Media Server v4.3 and Flash Media Live Encoder v3.2. How do I launch FMLE?
View 2 RepliesI would like to include Flash Live Media Encoder libraries (i.e. support for Flash Media Streaming) in an application I am developing. Ideally, this would be without having to install the FMLE Gui (though I can live with that); in a manner similar to WireCast or Tricaster. Could someone explain how one might go abount legally "bundling" FMLE 3.2 support etc.
View 1 RepliesI don't know if this is the right place to ask this or not, but I thought I remembered a way to pass a username and password to FMS via Flash Media Live Encoder? I simply need to pass two values, equivalent to this in AS3[url]...
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 Replies'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
Beside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesIs there a way to automate authentication via adding the username/password in the profile XML of flash media encoder live (3.2)? I'm not referring to the command line parameters, but placing a tag in the xml file that contains the username/password for both the primary and backup server.
View 2 Replies