How can I receive a 1.5Mbit stream from Flash Media Live Encoder and then re-encode it to 2 different streams?t's much like what Ustream is doing. They receive one high-quality feed, and then re-encode to a couple of different qualities in realtime.
View 11 RepliesI have already installled Flash media Development server. I need to workout this tutorial.But i am unable to see the Encoding Srever console .. How do i setuop this?
View 1 RepliesAfter installing FMS 3.5.1, anybody can use my server for live enconding. How can I configure the server to authorise live encoding only from subdomain 1234.4567 or by a password?
View 3 RepliesWe just found out someone is bouncing a pirated feed off our FMIS 3.5.2 server. after months of not having to look at this thing (and not remembering crap about parts of the setup), I'm trying to discover a few things.
First is, how do we tell FMIS which vhost allows live encoding? Second, as I look at the logs and logger.xml, I'm trying to tell how to force it to show the ip's of inbound/outbound traffic. Think I'm doing the right things to the file, but the log for the application/entry point the pirate is using doesn't show what I believe I configured to be the fields that should show up in the log. Finally, trying to figure out how to force authentication of media encoders talking to the server. I'm scanning the online help docs, etc. trying to remember all this stuff.... but if anyone can say "look at this page in the pdf, and this page in the online" to affect what I need to do to lock this up quick,
We have a webcam/chat application that is having bad issues with the video display of a live stream. The application is a bit old (Flex 3.2 recompiled to FB 4.5) and uses FMS 4 which gets it`s encoded streams from FMLE 3.2. The problem is that when a stream is sent using H.264, the playback in Flash is quite bad. Visually, it basically looks like Flash does not always display the "in between keyframes information" properly. Big square pixels from the last keyframe appear instead.
View 3 RepliesI want to build an application to stream h.264 video from the browser, how can I be able to do this? I can't seem to find the playerglobal.swc anywhere, I have Flash CS5.5
View 1 Replieswhen doing a live encode with Flash Media Live Encoder 3 to FMS 3.5, the encoder disconnects randomly after 1 to 8 minutes.It takes about 50 seconds for the encoder to recognize the lost connection, then it re-connects. I tried to encode from different locations, but the problem remains.
View 2 RepliesI use H.264 Video Format,25fps,800x600 size,1000Kbps.Start the encoding,the CPU utility rate is going up to the 90%~100% percent.Plenty of video drops.For to reduce the cpu utility rate ,i want to use the hardware encoding of the nvidia geforce or the ati videocard.Are the FMLE3 support the hardware h.264 encoding?
View 1 RepliesWe set up a Flash Media Server and we are trying to figure out how to protect our live encoding url. Seems like anyone with a Flash Media Encoder and who knew the location of our server could publish a live stream.
View 13 RepliesI need to find out how to layout my bitrates and widths in a way that will:make the switching between to levels (video qualities) as smooth as possible.support a wide range of bw (bandwidth). User with large bw should be fed with a high quality vid and users with low bw should be fed with a low quality vid.support both player widths: 416x240px and 640x340px without doing two different bitrate/with layouts. I have tested the following bitrate/width layot:Q5-Q8 is ment for fullscreen view, Q1-Q2 is ment for our small player and Q3-Q4 is ment for our large player.It works but I'm far from sure that it is the optimal layout. For instance, is it a problem that to videos with different widths have the same bitrate settings or bitrates that lay close to one another?As far as i know, the player (JW Player) will not choose a video that is more than 20% wider than the players width.
View 1 RepliesThe Signal is yuv or pcm stream , i use the fmle3.0 to encoding to the h.264 format.
Once started.the CPU utility rate is going up to the 100%. I want to konw,which kind of the CPU can support the live stream. In other words,My require is encoding the one live stream the cpu utility rate is below 30%.
I am using the new Flash Player 11 ability to encode H264 video within the Flash Player. I am streaming the webcam via RTMP to a FMS. I am using the following settings:H.264 BaselineLevel 5.1Keyframe freq. 5 seconds25 FPSInput size: 1280 x 720 (720p)Output size: 1280 x 720 (720p)Bit Rate: 1000KbpsWhen I am using these settings with FMLE 3.2, the final stream plays very fluent with a good amount of FPS. If I am using Flash Player 11 for the encoding job instead, the final video is not as fluent as before and achieves less FPS (maybe 5 FPS).So the question is: is Flash Player 11 not as good as FMLE 3.2 or am I missing some configuration?
View 2 Replieshow to get the encoding of a media (PAL, NTSC)? (I´m using Adobe flash media server)
View 7 RepliesWe just shipped Xuggler 3.4 this weekend which now has the ability to record and publish RTMP streams. That means you can now write Xuggler (a Java API for encoding and decoding video) programs that can publish to FMS or record from FMS.
We've worked closely with the FFmpeg team to get the core RTMP stack into that project, and have put together a tutorial on how to use FFmpeg to record or publish streams, including re-encoding media to H264/AAC while publishing.
I'm building a video conferencing applicaition for a portal. But now when considering which version of flash media server to buy, I run into some problem. So can anyone helps me about comparing this two versions: Flash Media Streaming Server and Flash Media Interactive server, like if I use Flash Media Streaming Server, some function like NetStream.pause() may not work or something like that? I'm not sure if this is a foolish question but please let me know.
View 3 RepliesThe company I work for installed FMS on a server running Centos for a customer who needed streaming media capabilities. It worked fine for 3 months until today the customer called us and informed us that their client program can no longer connect to the streaming media server. No one has done anything to the server to cause this to happen. When attempting to access the admin console to diagnose the program, the streaming server returned a 500 Internal Server Error. So I tried another page. Same result. Reboots of both the hardware server and the FMS have changed nothing.
View 5 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
The instructions for installation only cover installation on "localhost". I'm wondering if I could use the development server for a small scale website depolyment with restricted traffic, from a commercial server, such as goDaddy?And if so, what''s the method? Do I download the package from Adobe to my local hard drive and install over the network, or copy the package to the server and install it online?
View 1 RepliesThe $995.00 version is listed as not supporting server side playlists. Is it possible to implement internet TV station like functionality using that version? I would like to have a list of files to play out and have it so those connected are all viewing the same thing.
View 1 RepliesI have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 Replies