I am ramping up a Flash Media Interactive Server ver 3.5. My question is - I don't have Flash CS4, -does the flvPlayback component in it allow netstream connection control to facilitate FMIS connections? One that allows fullscreen for VOD streaming would be what I need.
View 2 RepliesI have upgraded from FMS2 > Flash Media Interactive Server 3.5 I added both the seriel number for FMS3 and FMS2 during the installation process. When I logged onto the admin panel there was no licence listed, and a link saying "to upgrade to unlimited connections now, click here".
So, I checked the fms.ini and no seriel was there. I put the seriel number in and restarted the server through the FMSadmin tool. Still, no licence file was showing. I then added the licence file via the admin panel and got a dialogue saying "Seriel Key "blah" Sent To The Server for approval". The seriel key now appears with a valid status of false. And no further progress after that. The documentation states that when you add the seriel key in this manner it should recognise it immediately.
Can anyone suggest what I might have done wrong? I have trebble checked the seriel number, and copied and pasted it to make sure it is exactly right.
As stated in the title, I want to know how to determine if my server/host has native bandwidth detection. I have FMIS 3.5 installed on my Linux server. Is this a setting in FMIS or is this something I have to call my host to find out?
View 5 RepliesI recently upgraded from FMS 2 - FMIS 3.5.Over our internal network videos stream like a dream!However, accessing them from outside our own network means that they take about 20 seconds to load, or sometimes just get a message saying the server isn't found.This wasn't a problem with the FMS2 and there have been no changes to firewall settings or anything like that since the old server was up and running without problems.I have the new server set to use exaclty the same ports, but wonder if there are some other settings which could be causing this?Networking isn't really my area of expertise, and I have no idea where to start looking to improve things.
View 2 RepliesSome users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 RepliesI have a silly question, how do you verify if your install of FMIS needs updating or security patches?I currently have FMIS ver 3.5.3 r824a.How the heck do you even verify if Adobe has a higher version? FMIS page just says FMIS 3.5
Sheesh, can Adobe make anything straight-forward?IT dept where I work says one of their security scans implied - that the FMIS install on one of our servers needs updates, what updates, who knows...
Can't get a clear answer on this - Does FMIS 3.5 run on an MS 2008 Web Edition Server (64bit)?
View 2 RepliesWere in the process of upgrading the FMS server licence to a FMIS licence. My question is that when we upgrade will we lose any of the functionality of FMS3.0 that is not present in FMIS. The FMS is currently used for direct streaming.
View 1 RepliesI've recently installed and set up a FMIS 3.5 setup and my web developer wants to have php on the server to create some dynamic content. Trouble is, I can not for the life of me get PHP to work on the server. Is there some special instructions that need to be followed with this special version of Apache that comes installed? Or is there any special reason I should use this version? If it won't hurt anything, I'm more than happy to just uninstall it and install my own Apache package, but I also don't want to limit or cause any problems in the future by doing so.
View 6 RepliesI`m using FMIS 3.5.2 (windows xp) and was trying to make this example working URL...When my flash media live encoder connects to 'livestreams/ localnews' publishing point i got in logs:CSAAACPI is connectedSending error message: Method not found (releaseStream).Sending error message: Method not found (FCPublish).localnews is publishing into application livestreams/_definst_Republishing the stream into "livestreams/anotherinstance"Stream Status: NetStream.Publish.StartThe stream is now publishing.When i`m trying to connect to the "livestreams/localnews" with flash media player i can see the stream from my webcam but when i`m trying to connect to republished stream 'livestreams/anotherinstance' i got nothing.Player says "loading..." and shows nothing.
View 5 Repliesadd php and mysql to fmis with apache?
View 1 RepliesI am developing a virtual classroom application for education purpose.I have developed following features in my application :
1 - Instructor audio and video for all students
2 - Shared whiteboard
3 - Animations using SWF controlled by instructor
4 - Chat functionality (Shared Variables Used)
I have to decide between Flash Media Server and Flash Media Interactive server and price difference between the two is huge.Considering the features indicated above I would like to know the server edition I should go ahead with.
I was wondering if any one could clarify something with IP multicast. From what I understand to get IP multicast to work the server needs to publish to the router box. So how can this be achieved if the FMS server is not in the same network as the router box? Would it require a second FMS server to be placed in the same network as the router box that connects to the main FMS server?
View 5 RepliesI have Flash Media Interactive Server 3.5.5 on Windows 2008 server. I developed video chat application (many to many), it's only 1 FMS application with about 50-100 room instances and 1 lobby instance to which all users are connected. There are up to 600 - 700 users at a time which produce about 2000-2500 connections to FMS. Problem I have is with steady raise of memory usage, which if goes little above 2GB will make FMS unresponsive and it would restart itself after about 1-2hours. To avoid that Im restarting FMS manualy every 3-4 days. Interesting thing I noticed is that if I restart FMS from admin console, used RAM memory won't fall at levels as if it would right after whole Windows server is restarted
[Code]...
we are streaming 24/7 live from a number of FMLE's to FMS Interactive server to a livepkgr cloned app., and to our clients we stream both to Flash via rtmp and to iOS via HLS.Since we want to introduce another server (to be able to serve more clients), the question is - hot to republish from one to another server so that both servers can stream rtmp and hls to clients?We are already using the backup url in FMLE to stream to a backup server - this we do not want to change since the backup server is just that - backup, if the main server fails.
View 2 RepliesI wanted to know if there is any facility to use Software Switchers along with FMIS The Situation: I am streaming multiple streams using FMLE from one place and at the receivers end, the client receives only of the streams at a time. So I wanted to apply switcher so as, I could stream only one stream from FMLE at one time I have explained the scenario in the attached image.
[Code]....
I have a very specific problem. I need to load certain images that my php script creates, and acts as proxy to some apis, into a Flash client (application) however I cannot use direct calls to HTTP server because I'm not allowed to use allowscriptaccess=true. So I've been using FMS for some aspects of my application such as live video and audio and SharedObjects.
I know I can write scripts to load and parse XML files on the server side so that shouldn't be a problem to get, however I'm stuck on loading in images going through FMIS.
When I test my video recording and chatting application using SharedObjects, everything works fine even if allowscriptaccess=false, but none of my images will load (naturally since the script access is limited). I know that some sites disallow scriptaccess parameter in Flash embed code so I would want everything to go through FMIS.
I have read some suggestions that I could try to load files directly from server-side on FMIS as binary and try to pass that to the client and let Flash generate the image with ByteArray but I wouldn't try to lose time if it's not possible or will stumble upon problems.
Does anyone have any ideas whether or not FMIS can serve images direclty through RTMP (which would save me some headache) beacuse I could load XML info from server-side and when I get the link to image use RTMP to load the image, but I'm unsure if this is possible at all.
I want to protect my live streams. I use allowhtmldomain.txt and include my domain name there. after i did that people stream to my FMIS using FME can not connect to my server.they are receiving error on FME saying " I did research and found this code var
VALID_REFERRER = "http://localhost/SimpleConnect.swf"; var VALID_PAGEURL = "http://localhost/SimpleConnect.html"; application.onConnect = function(pClient) { if (pClient.referrer == VALID_REFERRER && pClient.pageUrl == VALID_PAGEURL) {
[code].....
I sucessfully upgraded from FMS to FMIS. In the Admin it shows that the license is now Flash Media Interactive Server r405 I believe. The live and vod services continue to work as expected. On a separate development server I have developed a number of applications that I want to move to the new production server. Nothing connects at all on the new server. In the Admin, all the applications show as being available. Is there something I need to do to make it work?
View 6 RepliesOn one page of my website, the user has a large selection of videos they can choose from.They select one, clicking the link.This opens a new page (with the player built in?) and plays the video.Can I retrieve the data from a query string (the video filename selected from the previous page) and then place it in the action script using PHP (echo) so that I don't have to have separate applications for each video? or do I have to have separate SWF/applications for wach video?
View 5 RepliesWe have triple checked every possible component from a hardware level up to a software configuration level.Our platform consists of 2 origin servers with 6 edges talking to them (really beefy hardware).Once we inject a live stream into our two origins... we can successfully get the stream out via the edges and stream it successfully via our player.Once we hit around 2200 concurrent connections, the FMIS servers drops all the connections busy with streams.From the logs the only thing we can see is the following.Tons of disconnects with the Status code 103's which according to the online documentation means Client disconnected due to server shutdown (or application unloaded).We simulated the scenario with the FMS load simulator utility and we start seeing errors + all connections dropped around the 2200 mark.
The machines are Dell blades with dual CPU Xeons (quad cores) with around 50 gigs of ram per server... The edges are all on 10 Gb/s ethernet interfaces as well.We managed to generate a nice big fat coredump on the one origin and the only thing visible from inspecting the core dumps + logs is the following [code]From what it looks like above, FMS is hard crashing when trying to use clone(2) (basically it means when its trying to spawn a new/another process).I am really hoping there is someone out there who can guide us in the right direction with regards to how we can pinpoint why our platform cannot cope with a pathetic 2200 connections before the FMIS daemon drops all connected streams.
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it? The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
View 5 RepliesI'm setting up my fmis to deliver video through rtmp and http.I'm on a locked down network.What ports need to be open to allow people outside of the network to access the rtmp/http streams? I am correct to say only port 80 and 1935?
View 1 RepliesI have seen lots of different things about recording live streams (maybe too much, pieces everywhere but no one good source for the answers), but not what I am looking for...I want to setup recording of live streams on FMIS 3.5 where the file is named the stream name plus a timestamp (something like streamname-yyyymmddHHMMSS: myteststream-20090928101015).The people who use our site tend to start/stop several times (we are dealing with events that have breaks) and I want to be able to combine all the files with the same name into one big file on the server side afterwards using some utilities.I cannot find a tutorial that walks you through the different functions, the differences between them, and how recording is setup/works.
View 3 RepliesI'm a bit confused for a choice for my streaming application. I'm note sure if I need the FMSS or the FMIS. We want to place several encoders at clients with FME and they have to stream there source to a Flash Media Server. I want to use flowplayer at the client side. Do I need to have FMIS or FMSS for this live streaming application?
View 3 RepliesI just wanna ask something about deploying flash apps in Flash Media server.If I have developed (or costumize) a flash player under Flash Media Development Server (free/trial one) when I try to deploy the apps on FMSS, can it be done? I mean, from what I read in 3 FMS edition comparison table.it is said that we cannot build custom apps to be deployed in FMSS, only in FMIS, is that right?
View 2 Repliesi like to know how to declare a global variable in FMS, so that i can access it from different application instance of a same application.
View 4 RepliesI want to take a long video and only play a specific segment of it, based on user selection. Can this be done with FMIS?
View 2 RepliesSo I have a LAMP stack on a virtual server and would like to install FMS without using the apache that comes with FMS - I would rather just keep on using the currently installed LAMP-stack - is there a tutorial or documentation on how to accomplish this?
View 2 RepliesI have a case where I'm displaying 3 videos simultaneously using FMIS 3.5. When one is selected it will play the other two will switch and show a videoloop.
What is the proper way to accomlishing this. I actually have 6 videos (3 loops and 3 videos). Do I need a netconnection/netstream/video object for all of them or can they share something. What is the best practice?