Any way to set up individual Flash Access protection settings for each of some <Location /{url-path}> tags in httpd.conf in the Apache. I have found in the documentation that EncryptionScope can be set to content or server. If I set it to server and use FlashAccessV2 as ProtectionScheme, how or where do I specify the Flash Access certifications and so on?
View 4 RepliesIf I set EncryptionScope to "server" in httpd.conf (<fms>/Apache2.2/conf/httpd.conf) how or where do I specify the certificates for flash access if I want to use "ProtectionScheme FlashAccessV2".
<Location /custom-hds-vod>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "../webroot/custom/vod"
[code].....
i have to implement flash streaming for the relaunch of our video-on-demand system but either because i haven't worked with flash-related systems before or because i'm too stupid i cannot get the system to work as it has to.
[Code]...
I'm trying to develop a p2p (RTMFP) webcam chat application with AS3 and FMS. For test purposes I've been using "rtmfp://p2p.rtmfp.net" and now I'll use FMS on Amazon AWS.hat I couldn't understand is which application type should I use on FMS? There is four preconfigured application types on FMS, these are live, livepkgr, multicast and vod. I guess live or multicast but I cannot choose between them, I'm a little bit confused. Or maybe I don't have to setup any application?My application scenerio is; a user will connect to FMS and webservice and will get other person's farID from webservice and will be on audio/video chat with remote side as he sends stream. (with one person) Pretty much like sample Cirrus application.Also I've another issue, I also want to publish one person's (consultant in my case) video to several people (customers) at the same time (one to many), customers won't publish any video or audio, they'll only watch and hear consultant. Can I use RTMFP and P2P for that? I guess it will insanely increase publishers bandwidth needs, so should I use streaming on FMS and let customers to get stream from FMS
View 4 RepliesHow do I enable SWF verification on Location level in the Apache2.2/conf/httpd.conf ?
I have tried this but it does not block the player even if I dont have any whitelist file in the whitelist folder:
<Location /phds-hds-vod>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "../webroot/vod/phds"
[Code].....
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesWe have a setup where we have one application that multiple clients use.For each client we setup a seperate vHost on the server so that each client has a FMSCore and FMSEdge process running for their application.We currently monitor the processes to see if there are any problems with them on our production servers, but we would like to know if theres a way where we can link each process to a particular client so that if one goes down we are able to record the effect and notify that client.
View 1 RepliesI can't find the setttings for have a least latency as possible, either the video quality is bad or the latency is up than 5 secondes...What should i do?
[Code]...
I have an application where it records stream from my webcam, stores it in fms 3.5 application folder.
Recording is fine, I am using camera.setMode() method to set the width and height properties for the recording.
for eg: cam.setMode(388,284,15,false);
But when we check for the recorded video i am getting the widht and height as 352 , 264. even after changing the faovare boolean to false.
how i should set the camera so that the recorded video is of same size which i have given.
I am developing a live audio-video application using FMS 3.5. Any best possible settings i should use for playing a live netstream at the receiver side like what buffer time I should use etc?
View 2 RepliesI publish the video stream with H.264 settings to fms 3.5 as recorded and at the receiver's end play it as live. The problem is that at the receiver's end stream is played from the last 4-5 seconds. I want it to play from the current position of the live stream.
netstrm = new NetStream(nc);
netstrm.play("mp4:"+instanceName+".f4v", -1);
h264Settings= new H264VideoStreamSettings();
[code].....
I have developed flash audio and video chat application, every thing is working fine with all browser with in XP(os), but I have problem in Mac(os), i.e., I cannot able to click on Website Privacy Settings panel allow button in Mac 10.5.8, cursor is pointing on allow button, when am clicking on it nothing is happening, and there is no probelm in XP, I can able to click on Allow button. How do I stop or disable appearing Website Privacy Settings panel before webcam starts. I went through with [URL], here its allowing without appear website privacy setting panel for only one user that also for that particular PC only,i wanted to get allow for all online web users by default allow with out appearing website privacy seetings panel.
View 4 Repliesmake an interactive flash simulation of a display that has several different settings. these need to work individually so that the user can set the different indicators to the number they want. the picture shows the two main functions; a number indicator and a status bar (kind of like the reception bar on a phone).i have tried to get .swf files to load on top of each other, but they keep erasing previous settings in other indicators. is there a way to get this to work? or maybe a completely different approach that would be smoother? or can someone point me in the direction of a tutorial or a template that has this function?
View 4 RepliesSome users are unable to access any of our video content, getting a Server Not Found error.We have our FMS configured to use ports 1935, 433, 80. Our firewall is allowing RTMP traffic to each of these ports. Is there something more I can do from my end to make sure users can access our FMS?
View 1 RepliesIs there any way to access a Flash Media Server server-side script through a C++ plugin? I know you can call server-side functions, but I want to use the plugin to do image processing, so I need to get bitmap data from the client to the plugin. I've been poring over the documentation and the forums and there doesn't seem to be any way for the plugin to communcate with the server other than to read Event properties. If this is the only way for the plugin to recieve data from the server, is there any way to override an event property to send custom data?
View 5 RepliesCan Adobe Flash Media Streaming Server 3.5 run on AMD Athlon Dual Sock Quad Core?I just requested a Dell server to be added to our farm to run as a Media Server and to my surprise, while reading the requirements for FMS it states the following: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended)
View 2 RepliesI'm trying to troubleshoot a Flash Media Server working with a little video playback application I wrote a few years ago that has suddenly stopped working.I'm using CS3/Actionscript 3.My app uses the FLVPlayback Component, and was working well last time I checked. I recevied a report that the videos stopped working, and have been looking into it.I figured I'd add a bunch of event listeners to the FLVPlayback's ncMgr.netConnection so I could get debug info on things like io errors, net status, etc.The problem I'm running into is that the netConnection is null when I set it to anything on my Flash Media Server, and adding any event listeners to this netConnection throws errors.Here's what I've tried so far:
Playback of a local FLV file works fine.In the FLVPlayback documentation, I found an example and stole the URL of the stream they were using in the example, and that works fine, although it is an HTTP protocol stream rather than RTMP.Any attempt to access FLV files on my Media Server, which has worked fine in the past, basically cause the FLVPlayback object to sit and hang in "buffering" mode and never progresses beyond this point.The netConnection object in this case is null.Here's my code:[code]........
Again the purpose of this is to troubleshoot the video streaming from the Flash Media Server, and it seems like there is no netconnection to the server being created.Does this mean that the server is not working, or is there a problem with the way I'm trying to access the content on the server?This was all working fine before, and I have set up the server-side application .ASC files and such to allow things to work fine on the server end.
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 RepliesI would like to know the number of connection allowed in the free developer ediiton of Flash Media Server.
View 4 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I have to a problem using the Flash Media Interactive Server Feature Explorer. I want use the sample: RecordStream. I can see the instance "RecordStream" in console FMS 3.5. and show me the video in app AIR, but does not save the .FLV in my server.
View 6 RepliesApply the security patch found here:http:[url]............For more information see the followingresource:CVE: 2009-1365
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesOur flash media server stops taking connection sometime. Any one have any idea about sophos antivirus?
View 8 RepliesWe purchased FMIS and we are encoding large 15+ hour MP4 recordings using flash media encoder. When opening these large files for playback, which have not been opened recently the player displays the loading indicator for up to 4 minutes! Once it has apparently been cached on the server it opens immediately from any browser even after clearing local browser cache. So a few questions for the experts
1. Why is it taking so long to load the file. Is it because the MP4 metadata is in the wrong format and the file is so huge? I read somewhere that Media Encoder records with incorrect MP4 metadata is that still the case?
2. Once its cached on the server, exactly how much of it is cached. Some of these files are larger than 500mb.
3. What fms settings do you suggest I change. FMIS is running on windows server R2 64 bit, but FMIS itself is 32 bit. We have not upgraded to the 64 bit version. We have 8GB of ram. Is it OK to set FMS cache to 3GB. And would that only have enough room for 3-4 large files, because we have hundreds of them.
is it possible fast forward, rewind video in flash media server through flash action script ?
View 5 RepliesI am using flash media server 4.5 for video streaming and genrate log files. In log file i have found the user publish point name in "x-sname" filed but this filed contains blank values in many events.This fileds contains value only in "PUBLISH,UN_PUBLISH,RECORD and PUBLISH_CONTONUE" event and other then these 4 events all events are not user related event.?I like to fetch the user bandwidth detials using these log files which user used how many bandwidth.I also like to know I can see serval files on flash log folder name "access.00.log,access001.log and admin.00.log,admin.001.log" Any one please explain what is the name convation for this filed how can i identifiy which files contains information for which date.?
View 1 RepliesI am trying to create a flash player to stream an on online Internet radio station using FMS. I chose FMS after being told that I need RTMP server to extract the metadata. Our radio audio is being encoded using a DJ interface called SAM Broadcaster. But for some reason, it does not have an option to send over the stream directly to a Flash Media Server. Only options are either IceCAST or ShoutCAST. How should i setup the stream? Should it be Stream encoder>> IceCAST/SHOUTCast Server>>Flash Media Server>>Flash Player Client. Or should I setup Stream Encoder>>Flash Media Server>>Flash Player Client? Shouldn't Flash Media Server be an alternative to IceCast or Shoutcast? If that is the case, how do I send over the stream from SAM Broadcaster directly to Flash Media Server without restreaming through another streaming server?
View 2 RepliesI use a laptop which is never connected to the web for customer demos away from base. It does not have the Flash authoring environment installed either. Furthermore, a customer's own system used to run development versions of web sites using HTML with Flash content is not guaranteed to have web access either. Because some of the associated FLV files are quite large, uploading to a web host for such testing is not really viable even where clients have web access at meetings.
I have an AS3-based project which triggers Flash 10 local security protection on systems other those that used for authoring, for which the workaround is to set the source folder as trusted using the Flash Player Settings Manager. but [URL] doesn't seem to offer a useful way to avoid this problem without going on line to the Flash Player Settings Manager via an Adobe web site.
[Code]....
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.