I publish the video stream with H.264 settings to fms 3.5 as recorded and at the receiver's end play it as live. The problem is that at the receiver's end stream is played from the last 4-5 seconds. I want it to play from the current position of the live stream.
netstrm = new NetStream(nc);
netstrm.play("mp4:"+instanceName+".f4v", -1);
h264Settings= new H264VideoStreamSettings();
[code].....
I am developing a live audio-video application using FMS 3.5. Any best possible settings i should use for playing a live netstream at the receiver side like what buffer time I should use etc?
View 2 RepliesIn the article there : http:[url]...We can see this under 'User lookup'.RTMFP assigns a peer ID to each participant. These peer IDs are 256 bits long and are non-forgeable. When you want to subscribe to a directly published stream, you must specify the publisher's peer ID:
#var receiveStream:NetStream = new NetStream(netConnection, id_of_publishing_client); receiveStream.play("media"); In another thread, Michael said : i believe the problem is that you are attempting to make a P2P connection to the server's peer ID; that is, something like"
var ns:NetStream = new NetStream(netConnection, netConnection.farID);
ns.play(...);
under the covers, this will open a new RTMFP flow to the server that will appear to the server as a new incoming client, but the initial handshake will be incorrect (the first/only command message is "play" instead of "connect").i see this on Cirrus all the time.Is it an error in the article or is it right considering the scenario?
As a subscriber of live stream how do I get absolute stream time since it is published? Consider the case, a publisher has published a live stream at 0 seconds. It has been 100 seconds past since the live stream is published. A new subscriber comes to fms and subscribers a live stream. It starts playing that live stream but NetStream.time property will start from 0 instead of 100. Is there any way or configuration (in fms) which allows subscriber to get absolute stream time?
View 1 RepliesI'm trying to develop a p2p (RTMFP) webcam chat application with AS3 and FMS. For test purposes I've been using "rtmfp://p2p.rtmfp.net" and now I'll use FMS on Amazon AWS.hat I couldn't understand is which application type should I use on FMS? There is four preconfigured application types on FMS, these are live, livepkgr, multicast and vod. I guess live or multicast but I cannot choose between them, I'm a little bit confused. Or maybe I don't have to setup any application?My application scenerio is; a user will connect to FMS and webservice and will get other person's farID from webservice and will be on audio/video chat with remote side as he sends stream. (with one person) Pretty much like sample Cirrus application.Also I've another issue, I also want to publish one person's (consultant in my case) video to several people (customers) at the same time (one to many), customers won't publish any video or audio, they'll only watch and hear consultant. Can I use RTMFP and P2P for that? I guess it will insanely increase publishers bandwidth needs, so should I use streaming on FMS and let customers to get stream from FMS
View 4 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesIf I set EncryptionScope to "server" in httpd.conf (<fms>/Apache2.2/conf/httpd.conf) how or where do I specify the certificates for flash access if I want to use "ProtectionScheme FlashAccessV2".
<Location /custom-hds-vod>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "../webroot/custom/vod"
[code].....
How do I enable SWF verification on Location level in the Apache2.2/conf/httpd.conf ?
I have tried this but it does not block the player even if I dont have any whitelist file in the whitelist folder:
<Location /phds-hds-vod>
HttpStreamingJITPEnabled true
HttpStreamingContentPath "../webroot/vod/phds"
[Code].....
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 Repliesclose another live stream B if opening when stream A is closed? Does FMS support this kind of logic?
View 8 RepliesOnly just getting started on this whole domain of learning, so go easy!If I set up a P2P video/audio chat (similar to the sample VideoPhone thing on the Cirrus site), can I get the stream from both parties to send to a server at the same time so that I can record it? If so, would I have to use a FMS to stream it to and perform the recording (and if so which version could I get away with)? Are there any (preferably free, or just tutorialised) solutions for the recording side of things?
Currently it seems like the only option for doing the P2P thing is to use Stratus/Cirrus unless I use FMS4 Enterprise.
how effective this kind of situation can be, in terms of quality of the stream and recording? Does any of this make sense?
I've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
i test the fms 4 update 1 rtmfp streams multicast after 10 minutes i get this message RTMFP Multicast stream has exceeded max duration allowed; closing stream. but i do not use IP multicast
[Code]...
I build a client side application where is only a FLVPlayback2.5 component and a short AS3 script.
[Code]....
My Encoder is setup with three streams: Vid: 500 kbps - Audio: 48 kbpsVid: 800 kbps - Audio: 48 kbpsVid: 1500 kbps - Audio: 48 kbps I start the encoder and everything looks fine in the log. In my browser (Safari or Firefox) I go to my html site and the stream starts after 6-8 sec. But anytime with the lowest bitrate 548 kbps and nothing look like the stream is switching to another bitrate. I tried it with the smil playlist and the result is the same. Only the lowest bitrate is plublished.
[Code]....
I have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 RepliesI'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
vid.attachCamera(null);
vid.clear();
ns.attachCamera(null);
ns.attachAudio(null);
ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
The Administration API exposes many methods that allow for monitoring and administration of Flash Media Server. Evidently, the Administration Console provided with Flash Media Server uses this API via RTMP. It must then be possible to receive the log messages that are created when server-side actionscript calls the trace method as these messages are received by the Administration Console. But I cannot find any reference to this in the Administration API documentation.pick up these messages? For example, if you were to build your own administration console, as the documentation welcomes you to do, how would you replicate the "Live Log"?
View 3 RepliesI'm trying to stream a HDS live multi-bit stream, it seems to push to the FMS but my player doesn't display the stream.Are these settings and files correct? The documenation is confusing on what and which files need to be edited and/or created.
Encoder settings:
Bit Rate: 150,500,700
FMS URL: rtmp://myserver/livepkgr
Stream: liveevent%i?adbe-live-event?liveevent
FMS 4.5
I see the following directories being created when I start encoding and each directory has a single file with a .stream extension in them. Are these correct? fC:FMS-HOMEapplicationslivepkgrevents\_definst_liveevent1[code].....
I think I'm getting closer to the source of my problem.Let me outline my setup first (I'm using private IPs for example only). I have set two IP addresses to one network adaptor as follows:
CentOS 5.3 server running Apache 2.2.3 on eth0 with IP 192.168.0.78 <- working fine absolutely no problems at all
FMS 3.5.2 running Apache bundled with FMS on eth0:2 with IP 192.168.0.79
In fms.ini I have the following config:
ADAPTOR.HOSTPORT = 192.168.0.79:1935,80
HTTPPROXY.HOST = 192.168.0.79:8134
At (apparently) random times, the FMS Apache stops serving requests, but does not crash, and for some reason blocks requests to RTMP at the same time. Nothing appears in the log files which makes this even more tricky.I've run a test by shutting down apache as follows:
./httpd -f ./conf/httpd.conf -d "/opt/adobe/fms/Apache2.2" -k stop
and I expected RTMP to stop working aswell, however it continued serving up RTMP, which has led me to believe that something is then stalling the serving up of RTMP requests. This results in total downtime of all applications.
will i be able to send a video what i'am receiving form fms B to another fms A in a flash app?And how?
View 4 RepliesI need to be able to play any stream published to our FMS application, without connecting to the application as regular users do. I am an administrator and the service is ours. Can I do so using Administration API, for instance? I sure can get the list of the streams, but I have not found a way to stream these as video yet. I am building an application not unlike Admin. console, but with more functions that we need. If Admin. console seems to be able to play streams, it must be possible?
View 4 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I can't find the setttings for have a least latency as possible, either the video quality is bad or the latency is up than 5 secondes...What should i do?
[Code]...
Can I re-stream a stream from wowza to fms 4.5?I have a wowza stream with the url similiar to URL... Is it possible to restream this to fms 4.5?
View 3 RepliesI am building a custom administration application which has to review streams published to our FMS application. This is to ban clients publishing inappropriate content. I am wondering if I have to make a connection to the application, as normal users do, in order to play the published streams? I am getting the list of streams using another connection, to rtmp://domain:1111/admin, like outlined in Administration API, and issuing the 'getLiveStreams' call.
The reason I am asking is because firstly, I remember that the Administration Console can play streams published to the server, but I don't recall it incrementing the connection count which shows amount of user clients connected to an application. Maybe I have missed however, but if I am right and it indeed can play streams without connecting to the application (which actually DOES sound a bit unlikely, given how the stream names are local to an app.), then maybe I can do it too? Secondly, I presently have to differentiate users and administrators in my 'onConnect' script, because are perform completely different roles. If I could relieve my admin. app from connecting to the application, I could also dump the role switching.
I am developing video chat application. I am able to play published video stream. But I am unable to hear sound which is published along with the video. The video is visible but sound is not comming.What is going wrong.
View 7 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI have an application where it records stream from my webcam, stores it in fms 3.5 application folder.
Recording is fine, I am using camera.setMode() method to set the width and height properties for the recording.
for eg: cam.setMode(388,284,15,false);
But when we check for the recorded video i am getting the widht and height as 352 , 264. even after changing the faovare boolean to false.
how i should set the camera so that the recorded video is of same size which i have given.
I have created an swf where I can record the webcam picture as H264 video to a FMS 4.5 (I am using the developer version).My code is looking like this:
var h264Settings = new H264VideoStreamSettings();
h264Settings.setProfileLevel("baseline", "1.2");[code]....
I can then replay the video from FMS just fine, but if I try to copy the video from the FMS application directory into a local project and try to play the video with the FLVPlayback component, or with the Adobe Media Player, it is not playing at all.Is this to be expected? Can't I record a webcam video with FMS in H264 and use that video later without FMS?
It's easy to do on publishing clients, just use:http:[url]....How do we do it on the FMS? It doesn't appear to be possible according to these docs: http:[url]...What is the default for the FMS for the audioReliable, dataReliable and videoReliable properties?
View 2 Replies